Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Bigwormgraphix
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Cosmetics and Lighting Modification Discussions


Reply
 
Thread Tools
Old 11-17-2015, 09:56 AM   #1
lechess
 
Drives: LS3
Join Date: Jun 2015
Location: san antonio
Posts: 75
tire shop scratched my wheel

[/IMG]
lechess is offline   Reply With Quote
Old 11-17-2015, 10:00 AM   #2
lechess
 
Drives: LS3
Join Date: Jun 2015
Location: san antonio
Posts: 75
I had a bad expierence at a tire shop. The shop is saying that they didnt do it of course. Car is practially new it has 10k miles first time wheel was removed from the car. It had to be done with the metal pry bar they use
lechess is offline   Reply With Quote
Old 11-17-2015, 11:52 AM   #3
000montoya
 
000montoya's Avatar
 
Drives: 2014 RedRock 1LE
Join Date: Jul 2012
Location: Conroe, TX
Posts: 245
Was it discount tire ?
__________________
498RWHP 439RWTQ Instagram: jm_103
000montoya is offline   Reply With Quote
Old 11-17-2015, 12:22 PM   #4
lechess
 
Drives: LS3
Join Date: Jun 2015
Location: san antonio
Posts: 75
No it was a local tire shop "casias" close to my home. If it were discount tire, they would repair or replace.. This tire shop was trying to use every excuse possible. I had a long talk with them and it got heated really bad that i had to be seperated for them. calling me a liar pissed me off. Once they saw the condition of the car and other wheels they knew they screwed up so now they are going to get it repaired. As they say.
lechess is offline   Reply With Quote
Old 11-19-2015, 10:05 AM   #5
spadz93
BUMBL Z
 
spadz93's Avatar
 
Drives: 2015 ZL1
Join Date: Nov 2013
Location: Northern NJ
Posts: 2,577
This is why I only go to reputable shops instead of local and easy. I also document my stuff before and after I go to the shop with pictures
__________________
Sold: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower, Custom Camshaft, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, 680rw 93/750rw E85, Tuned by CSP
Sold: 2010 2SS, some bolt ons, 415rwhp/400rwtq

spadz93 is offline   Reply With Quote
Old 11-19-2015, 07:11 PM   #6
MikosV6
Account Suspended
 
Drives: '15 Camaro 1LS/M6
Join Date: Oct 2015
Location: So.Cal
Posts: 283
Quote:
Originally Posted by spadz93 View Post
This is why I only go to reputable shops instead of local and easy. I also document my stuff before and after I go to the shop with pictures
Who are these so-called reputable shops? A Goodyear "certified" tire center perhaps?

If so, I went to three of them in the past and they scratched my wheels and botched my alignment. In fact, the alignment was never 100% correct, so I just lived with it.

Now, with the Camaro, I don't know where I'm going to eventually take it because, quite frankly, I don't trust any shops around here.
MikosV6 is offline   Reply With Quote
Old 11-19-2015, 08:06 PM   #7
ba2ss
 
ba2ss's Avatar
 
Drives: 2012 2SS/RS M6
Join Date: Mar 2014
Location: kannapolis, nc
Posts: 378
this makes me want to get my own tire machine and do it myself. Hope the wheel gets fixed right the first time!
ba2ss is offline   Reply With Quote
Old 11-22-2015, 05:14 PM   #8
spadz93
BUMBL Z
 
spadz93's Avatar
 
Drives: 2015 ZL1
Join Date: Nov 2013
Location: Northern NJ
Posts: 2,577
Quote:
Originally Posted by MikosV6 View Post
Who are these so-called reputable shops? A Goodyear "certified" tire center perhaps?

If so, I went to three of them in the past and they scratched my wheels and botched my alignment. In fact, the alignment was never 100% correct, so I just lived with it.

Now, with the Camaro, I don't know where I'm going to eventually take it because, quite frankly, I don't trust any shops around here.
Mainly local (I sound like I'm contradicting myself now) shops that I've heard good things from a lot of people around here in town. What I really meant to say is that I only go to shops that either family, friends, or both have had good experiences with. Either that, or if I can go to a shop where I know the owner (ironically enough, with tires this is the case), then I go there. If you have any local car enthusiast friends, ask around. You may find a place that's solid.
__________________
Sold: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower, Custom Camshaft, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, 680rw 93/750rw E85, Tuned by CSP
Sold: 2010 2SS, some bolt ons, 415rwhp/400rwtq

spadz93 is offline   Reply With Quote
 
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:35 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2025, vBulletin Solutions, Inc.