Please help

[Johnq118]

Okay so my car is in and I have only put about 100 miles on it before I started working on it to make it perfect. Besides spending the 3000 for the paint I want and gutting the whole thing to paint it the right way... But that project will start in a year or so, so till than there are many things that can be done to make It the way I want it. Here is where the forums come into play so I need some help.
Okay so first I'm having trouble finding even a universal kit to move the gas lid to the rear fender/trunk like the concept I know it's not necessary but just one more thing I feal chevy should have done so I'm doing it. It's not that hard to do but I need a kit otherwise the emmisions light will come on and there's a chance of leaks not gas but water leaks so if anyone can help me find one I would really appreciate it. I got a couple guys trying to help me find one but it's harder than I thought. I'm gonna post all my pictures once I'm done with the first stages of my transformation of my 2SS ralley yellow manual...................
Also I'm painting the stripes on as well as other things I'm painting on the car so I can have them exactly the way I want them but does anyone possibly know what the distance is between the stripes and the width of them from the one from the Transformers movie. I mean I can eyeball it pretty well but If someone has the exact dimensions that would obviously be better. I have already lowered it sanded the ground effects but I'm not gonna paint them all ralley yellow I think you will all be surprised on what I'm doing with them also i put headers on it intake and many more things. So if anyone could help with those two things (The gas lid kit and the stripes) I would really appreciate it thx guys and keep enjoying the best thing that has happend to chevy in a long time.

[scythezo6]

Its too early to read all this. bbl.

[Mr Twisty]

Could you edit your post with paragraphs?

At least throw spaces in there..... I got lost 3 times in your post then gave up.

Sorry, dude.

[edit] You're looking for a fuel fill relocation kit to the top of the 1/4 panel..... Haven't seen anything on that... yet.

You want exact dimensions of bumblebee stripes... Someone may be able to help you.

[Johnq118]

yea really sorry for all those who read this the first time my laptop died so i had to post the message with my iphone at like 2 in the morning Sorry

[Tecca]

Well welcome to the forum!

Currently there are no kits to move the gas lid. Something I doubt you will find unless it is custom. I can tell you it is a chore to move the gas tank as you have to drop the rear and it is molded around the body so good luck.

If I remember right Oem is 3 inches and Bumblebee is 4 inches off center

[Johnq118]

Doesn't the bumbleebee stripes pinch in towards the front of the car they look wider where they start than where they finish

[Johnq118]

Okay anyone have any information on where to get hallogen lights for the fog lights and the headlights I did get the halos but I think the actuall bumbleebee are halogen thx again for the help

[Johnq118]

Oh also there are already hoods out with the ram air scoop but they are either to high or to low on the hood not true to the z28 concept in the revenge of the fallen transformers movie alright guys thx for all the help these forums are a great way to get ideas and feedback from other members also trying to do a meet and greet with some Michigan members so if anyone is interested let me know