Has anyone cleaned thier intake valves? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

C-redfly · 02-13-2016, 01:48 AM

How did you do it?

Sent from my Nexus 5 using Tapatalk

JMT · 02-13-2016, 05:44 AM

Your dealer should have the BG intake fogging kit that helps clean them up. I did it twice and getting ready for a third application. Other than that I have heard that you can blast them with walnut shells but it is costly and the shops are hard to find as not many do it. A few have done that themselves but the set up is very time consuming as everything needs to be blocked off as it can get messy. There was a thread on here about it and how to do it.

C-redfly · 02-13-2016, 04:20 PM

About how much does the kit cost and how is it applied. Thanks

Sent from my Nexus 5 using Tapatalk

intensifi · 02-18-2016, 12:45 AM

yes

I wrote this up a while back.

Feel free to PM if you have any questions.

http://www.camaro5.com/forums/showthread.php?t=288997

FYI: Check the DIY forum first when you have these needs

derek1387 · 02-18-2016, 06:51 AM

Quote:

Originally Posted by C-redfly

About how much does the kit cost and how is it applied. Thanks

Sent from my Nexus 5 using Tapatalk

Best bet is to call your dealer...since each dealer has different rates, we wont know what yours would charge.

C-redfly · 02-18-2016, 09:43 AM

I'll call today and let you know what they say.

Sent from my Nexus 5 using Tapatalk

Elite Engineering · 02-18-2016, 11:16 AM

Quote:

Originally Posted by C-redfly

How did you do it?

Sent from my Nexus 5 using Tapatalk

Take a look at this thread:

http://www.camaro5.com/forums/showthread.php?t=440510

02-13-2016, 01:48 AM	#1
C-redfly Drives: 2013 VR vert ZL1 Join Date: Aug 2012 Location: Los Angeles Posts: 1,495	Has anyone cleaned thier intake valves? How did you do it? Sent from my Nexus 5 using Tapatalk

02-18-2016, 12:45 AM	#4
intensifi Drives: '12 2LT Convertible Join Date: Mar 2012 Location: Belmont, California Posts: 1,701	yes I wrote this up a while back. Feel free to PM if you have any questions. http://www.camaro5.com/forums/showthread.php?t=288997 FYI: Check the DIY forum first when you have these needs __________________ Mods: GM Locking Gas Cap, RS License Plate Frame, SS Brembos, ZL1 FrontEnd, 14/15 Convertible Top Last edited by intensifi; 02-19-2016 at 01:01 AM.

02-13-2016, 05:44 AM	#2
JMT Drives: 2013 1LT Join Date: Oct 2013 Location: Panama City Beach, FL Posts: 703 View My Garage	Your dealer should have the BG intake fogging kit that helps clean them up. I did it twice and getting ready for a third application. Other than that I have heard that you can blast them with walnut shells but it is costly and the shops are hard to find as not many do it. A few have done that themselves but the set up is very time consuming as everything needs to be blocked off as it can get messy. There was a thread on here about it and how to do it.

02-13-2016, 04:20 PM	#3
C-redfly Drives: 2013 VR vert ZL1 Join Date: Aug 2012 Location: Los Angeles Posts: 1,495	About how much does the kit cost and how is it applied. Thanks Sent from my Nexus 5 using Tapatalk

02-18-2016, 09:43 AM	#6
C-redfly Drives: 2013 VR vert ZL1 Join Date: Aug 2012 Location: Los Angeles Posts: 1,495	I'll call today and let you know what they say. Sent from my Nexus 5 using Tapatalk