You are browsing camaro5 
 |
|
06-07-2017, 12:45 PM
|
#1 |
 
Drives: 2013-ZL1, 69-Z28, 71-CHEVELLE SS Join Date: Oct 2016
Location: South Jersey
Posts: 268
|
9.55 Lower pulley belt size
I have a 9.55 lower pulley with stock upper and lingenfelter relocation bracket.
Belt size on the chart calls for K080685 and I installed it and there is no slack at all on the tensioner, very tight. Anyone else use this belt?
__________________
2017 C7 Z06
2013-ZL1 2017 HELLCAT SOLD 2019 HELLCAT REDEYE WB 69-Z28, LSA SWAP, T56 MAGNUM 71-CHEVELLE SS, 496 STROKER TH400  |
|
|
|
06-07-2017, 05:27 PM
|
#2 |
|
ZL1 Pilot
|
I have found the lingenfelter belt chart totally useless when it comes to belt sizes. It was no where close when I did a 9.55 lower. You will just have to figure out which length works. I ended up using a K080702.
 
__________________
 |
|
|
|
|
06-07-2017, 06:07 PM
|
#3 |
|
Drives: 2013-ZL1, 69-Z28, 71-CHEVELLE SS Join Date: Oct 2016
Location: South Jersey
Posts: 268
|
The chart floating around on this site is where I got the belt info K080685 for 9.55 and stock upper
I just found the same chart with the LINGENFELTER name on it and it calls for a different belt K080690 looks like it's 1/2" bigger
__________________
2017 C7 Z06
2013-ZL1 2017 HELLCAT SOLD 2019 HELLCAT REDEYE WB 69-Z28, LSA SWAP, T56 MAGNUM 71-CHEVELLE SS, 496 STROKER TH400 |
|
|
|
|
06-07-2017, 06:31 PM
|
#4 | |
     Drives: ZL1, 2013, tri-coat-red, manual Join Date: Nov 2013
Location: Michigan
Posts: 1,663
|
Quote:
|
|
|
|
|
|
06-07-2017, 06:52 PM
|
#5 |
|
ZL1 Pilot
|
The update is still wrong. For me anyway. The chart should have a disclaimer to say approximate.
__________________
|
|
|
|
|
|
|
|
 |
|
|
