TSP 2" longtubes w/custom 3.5" dual exhaust and AirAid CAI - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

dennisgreener · 04-18-2016, 12:48 PM

I've decided to go ahead and start my turbo setup on my 2010 SS so I have a couple parts for sale.......

First is my full exhaust w/longtubes. TSP 2" primary longtubes in to 3.5" custom duals w/x-pipe made by me about 1 month ago. Sounds extremely throaty and very loud. No cats or mufflers. Runs in stock location and dumps in front of rear axles. This is all bolt on with a bracket I made that bolts up in the tunnel. Drivers side header has a ding on bottom but not bad. This was all brand new 1 month ago. I want to keep it all together. $800 firm for the entire setup.

Second is an AirAid CAI for a 5th gen SS. Very nice setup and very easy installation. Ithe will also come with a custom 4" tube that I made with silicon couplers to work with a holley hi-ram intake. Also have the regular tube unmolested from AirAid. $250 for this setup.

Or I will do all listed for $1k

You can shoot me a text if interested as I'm not on here much. My trader rating on this site is not up there because I'm new here but my trader rating under the same name on LS1TECH is 100% as I have bought and sold a lot over there. My number is 6602336251. Thanks for looking!!!!

TylerHaider · 04-18-2016, 03:53 PM

If you decide to sell TSP headers separate I might be interested

Cornflakes'Camaro · 04-18-2016, 06:17 PM

I'd be interested in making a deal for the 3.5" X pipe w/ dump offs if you decide to split.

kaseyb85 · 04-19-2016, 10:46 AM

$250 for the intake with all original pieces included?

dennisgreener · 04-19-2016, 11:13 AM

Yes, it includes original tube as well. It will work with the stock intake or the tube I made will work with a holley hi-ram.

04-18-2016, 12:48 PM	#1
dennisgreener Drives: 2010 camaro ss 6 speed, LS3 stock Join Date: Dec 2015 Location: United States Posts: 4	TSP 2" longtubes w/custom 3.5" dual exhaust and AirAid CAI I've decided to go ahead and start my turbo setup on my 2010 SS so I have a couple parts for sale....... First is my full exhaust w/longtubes. TSP 2" primary longtubes in to 3.5" custom duals w/x-pipe made by me about 1 month ago. Sounds extremely throaty and very loud. No cats or mufflers. Runs in stock location and dumps in front of rear axles. This is all bolt on with a bracket I made that bolts up in the tunnel. Drivers side header has a ding on bottom but not bad. This was all brand new 1 month ago. I want to keep it all together. $800 firm for the entire setup. Second is an AirAid CAI for a 5th gen SS. Very nice setup and very easy installation. Ithe will also come with a custom 4" tube that I made with silicon couplers to work with a holley hi-ram intake. Also have the regular tube unmolested from AirAid. $250 for this setup. Or I will do all listed for $1k You can shoot me a text if interested as I'm not on here much. My trader rating on this site is not up there because I'm new here but my trader rating under the same name on LS1TECH is 100% as I have bought and sold a lot over there. My number is 6602336251. Thanks for looking!!!! Attached Images

04-18-2016, 06:17 PM	#3
Cornflakes'Camaro Counting down the days... Drives: Black 2011 2SS/RS Join Date: Mar 2011 Location: Fort Walton Beach, Fl Posts: 637 View My Garage	I'd be interested in making a deal for the 3.5" X pipe w/ dump offs if you decide to split. __________________ Tick Performance Custom Cam w/ support mods/BBK LT Headers w/ midpipes/Straight Exhaust/Airaid Cold Air Intake/ZL1 Driveshaft/ZL1 Differential/Hendrix Engineering Offset Bushings/ZL1 Axles/BMR Rear Subframe Bushings/BMR Toe Rods/Carlyle Racing 15" Conversion/Jannetty Winsheild Bottle Scoop/Forgestar 15x10 Beadlocks wrapped in Mickey Thompson Radial Pros

04-19-2016, 10:46 AM	#4
kaseyb85 Keep Calm & Chive On Drives: 2013 Camaro SS/RS CGM Join Date: Apr 2013 Location: Columbia, SC Posts: 373 View My Garage	intake $250 for the intake with all original pieces included? __________________ 2013 Camaro SS/RS CGM

04-18-2016, 03:53 PM	#2
TylerHaider Drives: 2012 Camaro Silver 2SS Join Date: Mar 2016 Location: Malvern, Ar Posts: 59	If you decide to sell TSP headers separate I might be interested

04-19-2016, 11:13 AM	#5
dennisgreener Drives: 2010 camaro ss 6 speed, LS3 stock Join Date: Dec 2015 Location: United States Posts: 4	Yes, it includes original tube as well. It will work with the stock intake or the tube I made will work with a holley hi-ram.