You are browsing camaro5 
 |
|
07-06-2016, 11:06 PM
|
#1 |
|
Engineer
Drives: 2014 Camaro 2SS RS 1LE Join Date: Jun 2015
Location: SE Michigan
Posts: 230
|
Rear drop only?
Anyone here do a 1" rear drop only? I am tempted to pull the trigger on a 1" BMR rear drop only kit.
How are the effects on handling? Do you need rear camber bolts to get it back into alignment spec? Pictures? |
|
|
|
07-07-2016, 06:13 AM
|
#2 |
 Drives: 2015 2SS/RS/1LE Join Date: Jun 2015
Location: South FL
Posts: 213
|
This has definitely been done by some. A few have used the ZL1 rear springs to get a 1/2" drop in the rear only. You should have no problem getting the alignment done with the stock parts.
I don't know if anyone has done a 1" BMR rear drop though but it should be doable. |
|
|
|
|
07-07-2016, 07:34 AM
|
#3 |
    
Drives: 2013 1SS 1LE Join Date: Jun 2016
Location: Ixonia wi
Posts: 1,456
|
I'm interested in pictures also...I'd like to do this
|
|
|
|
|
07-07-2016, 10:20 AM
|
#4 |
      
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,173
|
But the ZL1 springs are different than SS/1LE springs linear vs variable or vice versa and do not work well with each other.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
|
|
07-07-2016, 12:11 PM
|
#5 | |
|
Drives: 2015 2SS/RS/1LE Join Date: Jun 2015
Location: South FL
Posts: 213
|
Quote:
Here is a link to some pictures and a pretty informative thread: http://www.camaro5.com/forums/showthread.php?t=311205 |
|
|
|
|
|
07-07-2016, 05:30 PM
|
#6 | |
|
Engineer
Drives: 2014 Camaro 2SS RS 1LE Join Date: Jun 2015
Location: SE Michigan
Posts: 230
|
Quote:
The pedders springrate is 433 lb/in while BMR is 460 lb/in |
|
|
|
|
|
|
|
|
 |
|
|
