Damn, scratched my front splitter! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

cabbe · 02-25-2017, 06:51 PM

Where is the best place to get a new one? How hard is it to take it off?

Mach83 · 02-25-2017, 10:18 PM

How bad is it? Pics?

cabbe · 02-25-2017, 10:40 PM

It's not that bad. But still it's there. I'm not home now. I'll take a pic tomorrow.

CreeperRS · 02-25-2017, 10:59 PM

Same here, scuffed, scratched from under, tabs broke on the driver side. You couldn't even tell, it's all good. Will be upgrading to the Z/28 aero package sometime soon.
Yeah, post some pics.

Mach83 · 02-26-2017, 05:20 PM

I worked on one that had a minor encounter with a curb. Nothing was buckled, cracked, or popped - it was just cosmetic. He was ready to order a replacement but after a couple hours of learning how to work with ABS it wasn't noticeable except by the 2 of us - because we knew where to look. The job required acetone, fine sandpaper for wetsanding, compound, and a heat gun. I will post up some before/after later. Point is - if is just light scuffing and some scratches - it might be a DIY fix.

cabbe · 02-26-2017, 08:52 PM

Awesome!

homewrecker · 02-26-2017, 09:44 PM

If it's scraped or has a few scratches you can sand it down and plasti-dip it. I did this last year and nobody can tell.

suprchrgd · 02-27-2017, 03:53 PM

Could have someone vinyl wrap it to match the hood. Should only be about $100.

02-25-2017, 06:51 PM	#1
cabbe Drives: 2014 2ss 1le Join Date: Sep 2011 Location: los angeles Posts: 1,074	Damn, scratched my front splitter! Where is the best place to get a new one? How hard is it to take it off? Last edited by cabbe; 02-25-2017 at 08:18 PM.

02-25-2017, 10:59 PM	#4
CreeperRS Drives: 20’ Chevrolet Camaro 2SS 1LE Join Date: Jan 2009 Location: San Diego Posts: 1,579	Same here, scuffed, scratched from under, tabs broke on the driver side. You couldn't even tell, it's all good. Will be upgrading to the Z/28 aero package sometime soon. Yeah, post some pics. __________________

02-25-2017, 10:18 PM	#2
Mach83 Drives: 2015 2SS RS 1LE Join Date: Nov 2015 Location: Western Connecticut Posts: 168	How bad is it? Pics?

02-25-2017, 10:40 PM	#3
cabbe Drives: 2014 2ss 1le Join Date: Sep 2011 Location: los angeles Posts: 1,074	It's not that bad. But still it's there. I'm not home now. I'll take a pic tomorrow.

02-26-2017, 05:20 PM	#5
Mach83 Drives: 2015 2SS RS 1LE Join Date: Nov 2015 Location: Western Connecticut Posts: 168	I worked on one that had a minor encounter with a curb. Nothing was buckled, cracked, or popped - it was just cosmetic. He was ready to order a replacement but after a couple hours of learning how to work with ABS it wasn't noticeable except by the 2 of us - because we knew where to look. The job required acetone, fine sandpaper for wetsanding, compound, and a heat gun. I will post up some before/after later. Point is - if is just light scuffing and some scratches - it might be a DIY fix.

02-26-2017, 08:52 PM	#6
cabbe Drives: 2014 2ss 1le Join Date: Sep 2011 Location: los angeles Posts: 1,074	Awesome!

02-26-2017, 09:44 PM	#7
homewrecker Drives: '04 Z06, '14BMW M235i, '15 SS/1LE Join Date: Feb 2014 Location: San Diego/Los Angeles Posts: 845	If it's scraped or has a few scratches you can sand it down and plasti-dip it. I did this last year and nobody can tell.

02-27-2017, 03:53 PM	#8
suprchrgd Drives: 2015 2SS 1LE Join Date: Dec 2016 Location: Indianapolis Posts: 116	Could have someone vinyl wrap it to match the hood. Should only be about $100.