Borla S type catback video - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Ltdodge · 07-26-2009, 06:12 PM

I found this video on youtube as trhe engineers were testing the Borla s type catback exhaust...

Doc · 07-27-2009, 12:32 AM

Man that sounds good...I think I've found my exhaust hehe, (sorry LoudMouth II).

caverman · 07-27-2009, 01:04 AM

Did I read during the video that it said it was in combination with LT headers? So, is that sound with or with out LT?

Sounds pretty good I must admit. I would strongly consider this one. However, you can get an SLP LM II for about $550 and then another $100 for the maganaflow x-pipe. Now grant it the system would be kinda pieced together system but still your talking $650 vs $1,500.

Gentry78 · 07-27-2009, 01:44 AM

Quote:

Originally Posted by caverman

Did I read during the video that it said it was in combination with LT headers? So, is that sound with or with out LT?

Sounds pretty good I must admit. I would strongly consider this one. However, you can get an SLP LM II for about $550 and then another $100 for the maganaflow x-pipe. Now grant it the system would be kinda pieced together system but still your talking $650 vs $1,500.

it doesn't look like there are LT on there they have the stock cats and i don't see a collector

i think they are just saying they are developing them as well

sounds great i wanna hear it under load

Paperer · 07-27-2009, 02:52 AM

Quote:

Originally Posted by Doc

Man that sounds good...I think I've found my exhaust hehe, (sorry LoudMouth II).

Hhaha, I think I agree. I'll have to check out the SLP video again.

Shurenuff · 07-27-2009, 10:31 AM

I hope they do an axle back Borla S type system. I'd be all over that. $1200-1500 is a little too steep for me for the cat back version.

Anyone know if they'll offer an axle back version?

jpsuperman81 · 07-27-2009, 10:54 AM

Quote:

Originally Posted by Shurenuff

I hope they do an axle back Borla S type system. I'd be all over that. $1200-1500 is a little too steep for me for the cat back version.

Anyone know if they'll offer an axle back version?

They already have one and mine is already on order.http://www.lmperformance.com/53588/119.html
I have the ARH headers/exhaust here already and the borla on the way, so that will be my setup ARH with borla mufflers. Hopefully installed as soon as car is here.

ChevyBoiSS · 07-27-2009, 05:16 PM

by far the best sounding to me

Ltdodge · 07-27-2009, 06:46 PM

Quote:

Originally Posted by caverman

Did I read during the video that it said it was in combination with LT headers? So, is that sound with or with out LT?

Sounds pretty good I must admit. I would strongly consider this one. However, you can get an SLP LM II for about $550 and then another $100 for the maganaflow x-pipe. Now grant it the system would be kinda pieced together system but still your talking $650 vs $1,500.

where can you get an x pipe for $100?

SwiftCat · 07-27-2009, 06:47 PM

Quote:

Originally Posted by jpsuperman81

They already have one and mine is already on order.http://www.lmperformance.com/53588/119.html
I have the ARH headers/exhaust here already and the borla on the way, so that will be my setup ARH with borla mufflers. Hopefully installed as soon as car is here.

I'm with ya, buddy. I've got the same setup (Borla axle-back w/ ARH headers) ordered and hopefully on the way sometime soon. Maybe we can load some video on a common thread once we both have everything installed. I'll have Blood enterprises here in Auburn, Wa. do a baseline dyno and then another right after. I'll wait to tune it...that'll come after I add the Vararam CAI sometime in the near-future.

BLACK10 · 07-27-2009, 08:10 PM

Quote:

Originally Posted by Ltdodge

where can you get an x pipe for $100?

http://www.summitracing.com/parts/MPE-10791/

caverman · 07-27-2009, 08:41 PM

Quote:

Originally Posted by BLACK10

http://www.summitracing.com/parts/MPE-10791/

Yep...that's the one. Another OP on 5thGen.org said he could definatley feel the difference when he replaced the factory H-pipe for the magnaflow x-pipe. Can't find the post right now but it sounded very promising and for $100 you can't go that wrong.

caverman · 07-27-2009, 08:48 PM

Just looked at the link from LMP for the Borla axle-back. Man...that's going to be a tuff decision between the Borla and SLP. I wonder what size the Borla tips are going to be. Whoever gets the Borla axleback system, please post pics and video once it's on. I still have about 6 mths or so before I get an SS so I hope I can hear them in person sometime.

Ltdodge · 07-27-2009, 09:02 PM

Quote:

Originally Posted by caverman

Just looked at the link from LMP for the Borla axle-back. Man...that's going to be a tuff decision between the Borla and SLP. I wonder what size the Borla tips are going to be. Whoever gets the Borla axleback system, please post pics and video once it's on. I still have about 6 mths or so before I get an SS so I hope I can hear them in person sometime.

I think they are 4.5" outside tips and 4" inside...

the factory SS comes with 3.5" inside and 3.75" outside

07-26-2009, 06:12 PM	#1
Ltdodge Drives: 2008 Z06 Join Date: Apr 2009 Location: Oviedo, Florida Posts: 891	Borla S type catback video I found this video on youtube as trhe engineers were testing the Borla s type catback exhaust... __________________

07-27-2009, 12:32 AM	#2
Doc Dances With Mustangs Drives: 2010 1SS/RS MT Join Date: May 2009 Location: USA Posts: 3,819 View My Garage	Man that sounds good...I think I've found my exhaust hehe, (sorry LoudMouth II). __________________ Blue Angel is here!! 1SS/RS LS3 M6 IBM

07-27-2009, 01:04 AM	#3
caverman Drives: '69 SS Convertible Join Date: May 2009 Location: DFW, TX Posts: 7,111	Did I read during the video that it said it was in combination with LT headers? So, is that sound with or with out LT? Sounds pretty good I must admit. I would strongly consider this one. However, you can get an SLP LM II for about $550 and then another $100 for the maganaflow x-pipe. Now grant it the system would be kinda pieced together system but still your talking $650 vs $1,500. __________________ *-2010 Camaro* 2SS \| M6 \| VR w/White Stripes \| 1 3/4" KOOKS - 3" Magnaflow \| LPE 3.91 gears \| ADM tuned \| Halltech w/ADM Scoop \| Spohn/BMR Trailing Arm/Toe Rod \| BC Coilovers\| Pedders FE4 ZL1 swaybars \| Cradle/Diff/Radius Rod bushings \| VMax TB \| Morimoto Projectors \| MGW shifter \| Red Calipers Build Journal

07-27-2009, 05:16 PM	#8
ChevyBoiSS Drives: 2011 2SS/RS RJT Join Date: Oct 2008 Location: Chicago, IL Posts: 302	by far the best sounding to me __________________ Thinking bout Victory Red 1SS/RS with Matte Black Custom Stripes. Automatic Transmission (L99) and apparently a $900 dollar whole in my roof. OHH.. DID I MENTION 24" off THE GROUND?!

07-27-2009, 08:48 PM	#13
caverman Drives: '69 SS Convertible Join Date: May 2009 Location: DFW, TX Posts: 7,111	Just looked at the link from LMP for the Borla axle-back. Man...that's going to be a tuff decision between the Borla and SLP. I wonder what size the Borla tips are going to be. Whoever gets the Borla axleback system, please post pics and video once it's on. I still have about 6 mths or so before I get an SS so I hope I can hear them in person sometime. __________________ *-2010 Camaro* 2SS \| M6 \| VR w/White Stripes \| 1 3/4" KOOKS - 3" Magnaflow \| LPE 3.91 gears \| ADM tuned \| Halltech w/ADM Scoop \| Spohn/BMR Trailing Arm/Toe Rod \| BC Coilovers\| Pedders FE4 ZL1 swaybars \| Cradle/Diff/Radius Rod bushings \| VMax TB \| Morimoto Projectors \| MGW shifter \| Red Calipers Build Journal

07-27-2009, 10:31 AM	#6
Shurenuff Drives: 2002 Nissan Altima Join Date: Jul 2008 Location: Chicago, IL Posts: 2,048	I hope they do an axle back Borla S type system. I'd be all over that. $1200-1500 is a little too steep for me for the cat back version. Anyone know if they'll offer an axle back version?