You are browsing camaro5 
 |
|
06-30-2017, 02:21 PM
|
#1 |
 
Drives: 2005 silverado ss 2010 camaro ss Join Date: Feb 2011
Location: Baton Rouge, LA
Posts: 351
|
Throwing ac belt often
Any other guys throwingthe ac belt?? I keep throwing it. Put new one. Im kinda worried that LME sent the wrong balancer cause they look almost as if they dont line up but when the belt is on not as bad. Was thinking of buying the g8 tensioner and making it work somehow. Car is turbo n spools quickly
|
|
|
|
06-30-2017, 03:14 PM
|
#2 |
          
Drives: '15 SS 1LE, '69 Z28 drag car Join Date: Dec 2009
Location: Mich
Posts: 4,482
|
was the balancer put on to the right depth? From the service manual:
Note: The nose of the crankshaft should be recessed 2.4–4.48 mm (0.094–0.176 in) into the balancer bore. That is for the OE balancer. If aftermarket, that company needs to tell you where the balancer needs to sit to be aligned. You set the depth using the old bolt, then discard and retorque with a new bolt. While watching to make sure the crank snout depth stays within spec. Ones that I've messed with that pitch the belt, someone just blasted it on with an impact, not actually setting it to the correct depth. Need a flywheel holding tool, and balancer install tool to do it right. If the flywheel is not locked solid, sometimes things are moving too much to get enough tq in there to set the right depth. There are also belt alignment laser tools that help see if things are lined up. Something that looks lined up, when using the "laser" will actually be way off. |
|
|
|
|
06-30-2017, 03:51 PM
|
#3 |
 
Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012
Location: Vance Alabama
Posts: 8,090
|
The G8s throw them more than camaros do.
__________________
Retired wanna be cylinder head porter
2015 2SS 1LE Clutch reservoir, Vararam DRX, ported TB, TSP 2" headers, MGW shifter, stage 4 cam and Wilkes 11° 65cc heads Totalled: 2010 1SS Wilkes Performance/Eagle 416 shortblock, TSP custom valvetrain, PRC 260 heads, Edelbrock Pro Flo 102, th400 swap, 8" PTC 5500 stall= 535/435 at the wheels tuned Gen 3 Performance and Dyno 10.97 @ 124 full weight in 3100 DA CamaroFest X |
|
|
|
|
07-01-2017, 12:13 AM
|
#4 |
|
Drives: 2018 1SS M6 Join Date: Nov 2014
Location: Houston
Posts: 2,617
|
Alignment issue or belt size issue.
|
|
|
|
|
07-01-2017, 12:23 AM
|
#5 |
|
Mine started to walk off half way when everything was bone stock. About 12k miles on the car when I noticed it.I don't know the cure for this and have read others having issues. Today my car is modded and the entire AC system is removed.. but still curious as to why this is happening on these cars and what the fix is.
__________________
Car mods: never enough!
 |
|
|
|
|
07-03-2017, 08:18 AM
|
#6 |
|
Drives: 2010 Camaro 2SS Victory Red 6M Join Date: Apr 2015
Location: Gulf Coast, TX
Posts: 1,424
|
I'm not sure why it happens, but mine did the same thing. Would throw the belt no matter the brand. Gates, Goodyear or whatever. Not sure what the cause was or is really. I don't like the stretch fit belts. I would much rather have the mini tensioner they used to have honestly.
__________________
2011 2SS 6A Red Jewel Metallic, Vararam Tune CAI, Magnaflow 3" Competition c/b, Speed Engineering 1-7/8 LT's, Circle D 5C, M/T 275/40R20 S/S, HPTuners tune by Ryan@GPI
12.3 @ 112 ACM as of 12/22/19 Gone on 12/28/19 R I P 2010 2SS 6M Victory Red/Black (old ride) CAI intake, Speed Engineering 1 7/8" LT's, X4 base tune, Flowmaster Outlaw axle-back. 12.6 @ 115 SAR as of 9/19/15 Gone but never forgotten. |
|
|
|
|
07-03-2017, 08:36 AM
|
#7 |
|
First, put a laser pointer on it and see how bad its off. If its off.
|
|
|
|
|
07-03-2017, 09:02 AM
|
#8 | |
|
Drives: '15 SS 1LE, '69 Z28 drag car Join Date: Dec 2009
Location: Mich
Posts: 4,482
|
Quote:
Doesn't use a tensioner or will a change of belt brand cure it, its the alignment. Measure crank snout depth. Get a laser alignment tool. It's a two piece thingamajig that laser lines a beam onto the driven pulley grid. Its like a mini alignment rack for the accessory drive system. The laser makes it obvious how far it's off. Adjust crank depth according. You'll need a new bolt, as the pulley/crank depth is set using the old bolt. It's toast after that much tq. |
|
|
|
|
|
07-04-2017, 05:39 AM
|
#9 |
|
Drives: 2010 Camaro 2SS Victory Red 6M Join Date: Apr 2015
Location: Gulf Coast, TX
Posts: 1,424
|
Yeah I never got around to messing with it that much. It was the stock dampener and had never been removed AFAIK.
__________________
2011 2SS 6A Red Jewel Metallic, Vararam Tune CAI, Magnaflow 3" Competition c/b, Speed Engineering 1-7/8 LT's, Circle D 5C, M/T 275/40R20 S/S, HPTuners tune by Ryan@GPI
12.3 @ 112 ACM as of 12/22/19 Gone on 12/28/19 R I P 2010 2SS 6M Victory Red/Black (old ride) CAI intake, Speed Engineering 1 7/8" LT's, X4 base tune, Flowmaster Outlaw axle-back. 12.6 @ 115 SAR as of 9/19/15 Gone but never forgotten. |
|
|
|
|
07-04-2017, 08:22 AM
|
#10 |
|
Drives: 2010 2SS LS3, 2013 duramax Join Date: Nov 2012
Location: Dover, De
Posts: 1,452
|
Mine did it once stock and once since ive had the balancer off for the cam swap.
__________________
ECS Ysi-B, cam, Tsp 2" longtubes, Squash dual pumps, Id1300s, meth, 4L80e, FTI 3600, ZL1 3.73 diff, BMR suspension, 15" conversion, weld rts mt 275 et street R. 9.6@147mph
|
|
|
|
|
|
|
|
 |
|
|
