aFe Cold air intake - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

SupremacyCustoms · 11-01-2009, 03:20 PM

This performance cold air intake system picks up 10 Hp at 4,300 RPM, 12 lbs x ft of torque at 4,000 RPM and increases airflow by 35% over stock. Features a massive air filter for the highest possible air flow, a one-piece, powdercoated heat shield to keep out hot engine air, and optimized MAF sensor positioning for trouble free installation. Installs in 30-45 minutes with no cutting or drilling required.

Didnt see anyone post anything about this one yet so i thought i would throw it out there.

HorsePowerAddicts · 11-01-2009, 05:56 PM

I have installed this intake before. I like that the filter connects to a velocity stack. I dont like the air resonator coming off the elbow. Other than that it is similiar to the rest.

BackinBlackSS/RS · 11-01-2009, 07:44 PM

Quote:

Originally Posted by HorsePowerAddicts

I have installed this intake before. I like that the filter connects to a velocity stack. I dont like the air resonator coming off the elbow. Other than that it is similiar to the rest.

Yeah, what is the reason this is on there? I don't like it as well. Does not give a clean look as some others do.

DarricSS · 11-02-2009, 06:44 AM

Quote:

Originally Posted by BackinBlackSS/RS

Yeah, what is the reason this is on there? I don't like it as well. Does not give a clean look as some others do.

It's hard to see in the small photo's, but there is a small hose that connects to that box and runs under the engine cover to a conection. Not sure exactly what that hose is for, but maybe that box on the elbow serves some type of purpose...

11-01-2009, 03:20 PM	#1
SupremacyCustoms Drives: black 2010 2ss/rs camaro Join Date: Oct 2009 Location: Rockland NY Posts: 739	aFe Cold air intake This performance cold air intake system picks up 10 Hp at 4,300 RPM, 12 lbs x ft of torque at 4,000 RPM and increases airflow by 35% over stock. Features a massive air filter for the highest possible air flow, a one-piece, powdercoated heat shield to keep out hot engine air, and optimized MAF sensor positioning for trouble free installation. Installs in 30-45 minutes with no cutting or drilling required. Didnt see anyone post anything about this one yet so i thought i would throw it out there.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Supercharger / Turbocharger Results (INFO) Thread	radz28	Forced Induction - V8	273	08-15-2023 05:44 PM
g5cr cai system anybody install or looking at one "pics"	camarossrs2150	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	41	07-14-2011 09:26 PM
Hot air Intakes -By Kenne bell	ADM PERFORMANCE	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	66	02-08-2011 09:33 PM
List of Intakes that will work with the TVS-2300 MagnaCharger	JJ2010	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	26	03-19-2010 03:11 AM
Why RAM Air is a myth!!! Long Read (Wall of text)	live2well	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	80	11-02-2009 04:34 PM

11-01-2009, 05:56 PM	#2
HorsePowerAddicts Drives: LSx Powered Join Date: Oct 2009 Location: 19804 Posts: 448	I have installed this intake before. I like that the filter connects to a velocity stack. I dont like the air resonator coming off the elbow. Other than that it is similiar to the rest.