stage 2 cam??

[MrcamaroZ28]

HAs someone put a cam in their car. I'm looking for a stage 2 BTR or GPI the sound is KICK ASS!! and a pretty hp gain...should put me around 530 to 550 to the wheels is what Im told.

[Schlok]

Are you planning on cam only? You'll need a few more parts for that power.

[MrcamaroZ28]

I already have Kooks headers and full exhaust w/no cats. Im gonna replace the valve guides too just for a piece of mind, its probably not needed but its only $400...

[1970judge]

I dont know the specs on Brians cams are these days, but ive seen Bolt on, cam only LS7's hit 550's rwhp wise so its doable Cam/mods depending.

[YOLO Z/28]

Originally Posted by MrcamaroZ28

HAs someone put a cam in their car. I'm looking for a stage 2 BTR or GPI the sound is KICK ASS!! and a pretty hp gain...should put me around 530 to 550 to the wheels is what Im told.

530-540whp is totally doable with this cam and your mods with a solid tune. My car baselined 471whp bone stock. The stage 2 cam is mild, so you'll only see about 40-50whp from the Cam alone. The extra power comes from your exhaust work and a good tune. A friend of mine has the stage 4 cam with upgraded springs and headers in his car. It put down 609rwhp on 93.

The LS7 really responds well to a cam. It already has the capacity to flow a lot of air due to it's architecture and shear volume. The cam just helps the motor by adjusting duration, etc.