![]() |
|
|
#1 |
|
Drives: C6 Z06, 2011 Camaro convertable Join Date: Sep 2009
Location: Scott, LA
Posts: 225
|
2010 Camaro SS M6 Stock Dyno
Posting this up for a customer of mine. We dynoed his car about a week ago bone stock. I know you guys like to see numbers and videos.
![]() |
|
|
|
|
|
#2 |
![]() Drives: 2010 Lincoln MKS Join Date: Nov 2009
Location: Detroit, MI
Posts: 75
|
Is it normal to loose 80+ horses at the RW?
|
|
|
|
|
|
#3 |
|
Go Blue!!!!!
Drives: 2012 Cruze LT Join Date: Mar 2009
Location: Indiana
Posts: 23,290
|
Well if you figure 15% loss through the drivetrain for a manual, then these numbers are just about on. Jannetty's testing showed 375 stock at the rear wheels. Not sure of miles
on either car. |
|
|
|
|
|
#4 |
|
Pat @ ADM PERFORMANCE
Drives: CGM SS/RS M6 Join Date: Aug 2009
Location: Prosper, TX
Posts: 506
|
360/365 is perfectly in line with most stock M6 cars.
I have seen lower and higher by 10/10.
__________________
"old age and treachery will always overcome youth and ambition" author unknown "There are two types of racers: cheaters...and losers." Smokey Yunick ![]() |
|
|
|
|
|
#5 |
![]() Drives: 2010 Lincoln MKS Join Date: Nov 2009
Location: Detroit, MI
Posts: 75
|
Hmmm how to get 425 RWHP without voiding my warranty???
*scratches head* |
|
|
|
|
|
#6 |
|
SoCal C5 Family Member
Drives: 2010 Black Camaro 2SS with LS3 Join Date: Oct 2009
Location: Lake Forest, CA
Posts: 57
|
Rauhaus Camaro SS LS3: Dyno-Tune with Shorty Headers, GMPP Tracker Exhaust, and K&N Filter: 381.2 RWHP and 390 RWT at Superior Engineering in Anaheim, CA
|
|
|
|
|
|
#7 |
|
SoCal C5 Family Member
Drives: 2010 Black Camaro 2SS with LS3 Join Date: Oct 2009
Location: Lake Forest, CA
Posts: 57
|
I have been told from Superior that the Manual Transmission's loss is approximately 18% through the drivetrain
|
|
|
|
|
|
#8 |
|
SoCal C5 Family Member
Drives: 2010 Black Camaro 2SS with LS3 Join Date: Oct 2009
Location: Lake Forest, CA
Posts: 57
|
360 RWHP x 1.18 = 424.8 HP @ the Flywheel. That's about right. You will find that GM runs the car's AFR fat to probably save the Cats, retard the timing a tad and slow down the MAS.
|
|
|
|
|
|
#9 |
![]() ![]() Drives: 2010 Camaro Auto 2SS/RS Join Date: Oct 2008
Location: Wauconda, IL
Posts: 878
|
Seems low. How many runs were there to get these numbers? Hope it wasn't just one. No way a LS3 should get less then 370rwhp unless you've got bad gas or some other problem.
And how is the torque higher then hp??? Something doesn't add up with this dyno.
__________________
Built by Jannetty Racing
670rwhp/649rwtq...Scariness to be determined. Jannety Racing forged 416. TVS2300 Supercharger w/Maggie Max Stage 2, 3.6 Pulley, Innovators West 8 rib conversion, OD rear Cog belt drive. Jannetty Racing Rough Idle Cam, LS3 Conversion. Jannetty Racing built 6l80e Trans, Jannetty Racing Custom Converter, Built rear diff w/ 3.45 gears, DSS driveshaft and 1400 hp axles. ADM Twin Pump Fuel System, ADM CAI, Dynatech 1 7/8" Coated Headers, Borla "S" Catback. Custom 18" Forgestar F14's, Nitto 305/45-18 DR's |
|
|
|
|
|
#10 |
|
Pat @ ADM PERFORMANCE
Drives: CGM SS/RS M6 Join Date: Aug 2009
Location: Prosper, TX
Posts: 506
|
Every single stock car we have put on our dyno has more TQ than HP stock. L99 and LS3 alike.
__________________
"old age and treachery will always overcome youth and ambition" author unknown "There are two types of racers: cheaters...and losers." Smokey Yunick ![]() |
|
|
|
|
|
#11 |
![]() ![]() Drives: 2010 Camaro Auto 2SS/RS Join Date: Oct 2008
Location: Wauconda, IL
Posts: 878
|
I wonder why that is... Didn't GM put out 426hp and 420tq for the LS3's?
__________________
Built by Jannetty Racing
670rwhp/649rwtq...Scariness to be determined. Jannety Racing forged 416. TVS2300 Supercharger w/Maggie Max Stage 2, 3.6 Pulley, Innovators West 8 rib conversion, OD rear Cog belt drive. Jannetty Racing Rough Idle Cam, LS3 Conversion. Jannetty Racing built 6l80e Trans, Jannetty Racing Custom Converter, Built rear diff w/ 3.45 gears, DSS driveshaft and 1400 hp axles. ADM Twin Pump Fuel System, ADM CAI, Dynatech 1 7/8" Coated Headers, Borla "S" Catback. Custom 18" Forgestar F14's, Nitto 305/45-18 DR's |
|
|
|
|
|
#12 | |
|
5Th Gen (Craig)
|
Quote:
I've had the car since May 22nd the dealer put the first tank of unleaded fuel in it and I've used Premium since then. I pulled the fuses for 24 hours just in case it needed it but I couldn't tell any difference. The car is bone stock and I only drive it on clear sunny weekends, it had 1050 miles on it for the dyno runs. I haven't beaten on it much mostly 1st thru 3rd gear short run ups. I was hoping for a number in the 370's but that didn't happen and I'm cool with that. I'd rather be on the low side and be impressed with a higher number on a different dyno that the opposite. I did it to get a baseline to see how much I gain with a complete exhaust system, CAI and a tune. Hopefully it's enough to put me over the 400 mark |
|
|
|
|
|
|
|
|
![]() |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| An interesting Camaro (and GM) story! I just bought my 2010 Camaro! | Camarodriver | Camaro Price | Ordering | Tracking | Dealers Discussions | 12 | 11-28-2010 04:52 PM |
| 2010 Camaros Available AT SUPPLIER Pricing at MacMulkin Chevrolet! | MacMulkin | Dealer Camaros for Sale | 4 | 12-08-2009 09:12 AM |
| 2010 Camaro SS Brembo Heavy Duty Cross Drilled Brake Rotors In Stock Ready To Ship | Tim@Lingenfelter | Suspension / Chassis / Brakes | 4 | 12-07-2009 09:26 PM |
| 2010 Mustang GT vs 2010 Camaro SS | Fireball | Chevy Camaro vs... | 257 | 05-18-2009 12:04 PM |
| Ambient lighting (ABL) - the FINAL update = LIMITED TO DOOR PANELS | CamaroScotty | 5th Gen Camaro SS LS LT General Discussions | 338 | 04-15-2009 06:33 PM |