New STS Cold Air intake for 2010 Camaro V8 +23whp! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

maperformance · 12-17-2009, 07:28 PM

These won't be available to ship until January, but I wanted to share these amazing results and get a pre-release sale going as we currently have the exclusive rights to this system

STS was not the first company and certainly won't be the last to offer an intake for the new Camaro, but they wanted to make sure it was just right and delivered great power at an even better price. Dyno proven results from a company that provides results time and time again. The dyno sheet shows the best stock pull vs the worst STS Intake pull. As you can see the power gain is tremendous in both HP and TQ to the rear wheels. Test car was a 2010 Camaro SS LS3 6 speed. +23.17 rwhp and +23.78 rwtq . Why pay more?

Click the image above for a larger view. Additional product images coming soon!

These bad boys will be available in both polished aluminum and black powder coated at an MSRP of only $275! Please contact me for special pre-release pricing!

Hyp · 12-17-2009, 08:29 PM

I'm in!

BLKLIST · 12-17-2009, 08:55 PM

wow, nice numbers haha... hows price compared to everything else?

Wileytrigger21 · 12-17-2009, 09:00 PM

HondaPowered · 12-17-2009, 09:04 PM

how bout on the auto?

BLKLIST · 12-18-2009, 12:48 PM

This may be the same intake i saw at the PRI show in Orlando... it is a beast

can't wait to see these on some cars making doo power

macinbro · 12-18-2009, 12:58 PM

subscribed!

RedJewelrsss32 · 12-18-2009, 01:09 PM

Quote:

Originally Posted by mccd34

2nd that want to see it first

BLKLIST · 12-18-2009, 01:34 PM

yep, thats the one I saw at the show, the prototype.. I called it a "mantake" it should feed us plenty of air haha, it was no B.S. strictly this is all you need and enjoy... XMAS GIFT!!! pleeez

maperformance · 12-18-2009, 01:41 PM

Added the only pic they would release to me at this time lol. It will be available in both polished aluminum and black powder coated and the MSRP is only $275! In hopes of getting them into the hands of more customers I will be offering some special pre-release pricing though

Hyp · 12-18-2009, 01:54 PM

Will it come with a heat shield?

maperformance · 12-18-2009, 02:00 PM

I believe they tested it in two configurations, one with and one without a heat shield and found the differences in regards to power output to be minimal. With that said they chose to move forward without the heat shield to keep costs down...

Davis · 12-18-2009, 04:27 PM

Dyno is suspect to me.
Most LS3's push 370 stock.
First run could have been on low octane table too.

Just a thought...

BLKLIST · 12-18-2009, 05:22 PM

Quote:

Originally Posted by Davis

Dyno is suspect to me.
Most LS3's push 370 stock.
First run could have been on low octane table too.

Just a thought...

I doubt it, their reading on stock graphs for the turbo r&d read 345-350 each time from what has been published... much like their kits I think this product is just plain old good.

12-17-2009, 07:28 PM	#1
maperformance Drives: LQ4 Powered FD RX-7 Join Date: Nov 2009 Location: Plymouth, MN Posts: 515	New STS Cold Air intake for 2010 Camaro V8 +23whp! These won't be available to ship until January, but I wanted to share these amazing results and get a pre-release sale going as we currently have the exclusive rights to this system STS was not the first company and certainly won't be the last to offer an intake for the new Camaro, but they wanted to make sure it was just right and delivered great power at an even better price. Dyno proven results from a company that provides results time and time again. The dyno sheet shows the best stock pull vs the worst STS Intake pull. As you can see the power gain is tremendous in both HP and TQ to the rear wheels. Test car was a 2010 Camaro SS LS3 6 speed. +23.17 rwhp and +23.78 rwtq . Why pay more? Click the image above for a larger view. Additional product images coming soon! These bad boys will be available in both polished aluminum and black powder coated at an MSRP of only $275! Please contact me for special pre-release pricing! Last edited by maperformance; 12-18-2009 at 01:44 PM.

12-17-2009, 09:04 PM	#5
HondaPowered Drives: '09 Honda Civic LX Join Date: Jun 2009 Location: Knoxville Posts: 562	how bout on the auto? __________________ Saving up for a camaro. Dream camaro is either a 1/2SS with RS, black with red stripes, or red with white stripes. No rice with my order.

12-18-2009, 04:27 PM	#13
Davis Drives: '10 Black 2SS/RS M6 Join Date: Jan 2009 Location: Cincinnati Posts: 126 View My Garage	Dyno is suspect to me. Most LS3's push 370 stock. First run could have been on low octane table too. Just a thought... __________________ Black, 2SS/RS, Manual, Inferno Orange Accent Trim Pkg, Sunroof, Rear Ground Effects Tinted Windows, DT shorty headers, !mufflers, !CAGS, Barton STS, Vararam VIN# 2G1FT1EW5A9101443 Delivered 4/17/2009

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PEDDERS SUCCESSFULLY FITS 305s ON ALL 4 CORNERS!	Info@PeddersUSA.com	Suspension / Brakes / Chassis	467	06-11-2013 10:45 PM
Camaro Product Manager - interview	Moose	5th Gen Camaro SS LS LT General Discussions	11	04-04-2012 07:10 PM
Roto-Fab Cold Air Intake from Phastek Performance	Sean@Phastek	V8 Bolt-Ons & Tunes	17	06-09-2010 01:31 PM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
Official Camaro Convertible CONCEPT Press Release	Tran	Camaro Convertible Forum	12	11-18-2009 08:05 PM

12-17-2009, 08:29 PM	#2
Hyp I've been lost... Drives: 2010 SW 2SS/RS W/IOM LSA Swap Join Date: Nov 2009 Location: DFW, Texas Posts: 466 View My Garage	I'm in!

12-17-2009, 08:55 PM	#3
BLKLIST Boosted Drives: Trailblazer SS, SRT-10 Join Date: Aug 2009 Location: USA!!!! Posts: 43	wow, nice numbers haha... hows price compared to everything else?

12-17-2009, 09:00 PM	#4
Wileytrigger21 Drives: 2010 CGM 2LT / RS, Blk 1SS/RS Join Date: Sep 2009 Location: TEXAS Posts: 404

12-18-2009, 12:48 PM	#6
BLKLIST Boosted Drives: Trailblazer SS, SRT-10 Join Date: Aug 2009 Location: USA!!!! Posts: 43	This may be the same intake i saw at the PRI show in Orlando... it is a beast can't wait to see these on some cars making doo power

12-18-2009, 12:58 PM	#7
macinbro Drives: 2SS RS CGM LS3 Join Date: Aug 2009 Location: Winter Springs, FL Posts: 72	subscribed!

12-18-2009, 01:34 PM	#9
BLKLIST Boosted Drives: Trailblazer SS, SRT-10 Join Date: Aug 2009 Location: USA!!!! Posts: 43	yep, thats the one I saw at the show, the prototype.. I called it a "mantake" it should feed us plenty of air haha, it was no B.S. strictly this is all you need and enjoy... XMAS GIFT!!! pleeez

12-18-2009, 01:41 PM	#10
maperformance Drives: LQ4 Powered FD RX-7 Join Date: Nov 2009 Location: Plymouth, MN Posts: 515	Added the only pic they would release to me at this time lol. It will be available in both polished aluminum and black powder coated and the MSRP is only $275! In hopes of getting them into the hands of more customers I will be offering some special pre-release pricing though

12-18-2009, 01:54 PM	#11
Hyp I've been lost... Drives: 2010 SW 2SS/RS W/IOM LSA Swap Join Date: Nov 2009 Location: DFW, Texas Posts: 466 View My Garage	Will it come with a heat shield?

12-18-2009, 02:00 PM	#12
maperformance Drives: LQ4 Powered FD RX-7 Join Date: Nov 2009 Location: Plymouth, MN Posts: 515	I believe they tested it in two configurations, one with and one without a heat shield and found the differences in regards to power output to be minimal. With that said they chose to move forward without the heat shield to keep costs down...