Screws Help

[BoloYang6]

Hi Guys!


I just realize I don't have screws to connect car with plastic shield around wiper blades. What screws I should look? I attach image.


Thanks!

['10CamaroDude]

I replaced these on my Mustang:



With these:

They are dirt cheap on eBay, available in lots of colors. I used them in place of ALL
the push in fasteners and 10mm bolts.


I have a riv-nut tool, and nut-serts, or well nuts.

Drilled the holes the right size:



Pop in the well-nut:






Replaced all the hood insulator push in fasteners:
:


Still need to do the fender liners, and other things, but they will all be
replaced with stainless bolts, and the red anodized washers. I am doing
the same with the tail light covers on my Camaro, as soon as I get it back.

[BoloYang6]

Originally Posted by '10CamaroDude

I replaced these on my Mustang:



With these:

They are dirt cheap on eBay, available in lots of colors. I used them in place of ALL
the push in fasteners and 10mm bolts.


I have a riv-nut tool, and nut-serts, or well nuts.

Drilled the holes the right size:



Pop in the well-nut:






Replaced all the hood insulator push in fasteners:
:


Still need to do the fender liners, and other things, but they will all be
replaced with stainless bolts, and the red anodized washers. I am doing
the same with the tail light covers on my Camaro, as soon as I get it back.

This looks amazing! Thanks again!