Bk fab supercharger tank - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Valdizo · 04-27-2020, 03:07 AM

Hi anyone running one of these... do you recommend

d kings z28 · 04-27-2020, 05:11 AM

I have one on the way got it her. https://www.prospeedautosports.com/p...exchanger-tank

Bigtime53 · 04-27-2020, 08:12 AM

I like the look of that. That is going to be my next got to have for my car.

RobZL1 · 04-27-2020, 10:03 AM

Prospeed used to be D3. Lots of folks are running the D3 (now Prospeed) tank.

ZMEnow · 04-27-2020, 12:32 PM

Quote:

Originally Posted by RobZL1

Prospeed used to be D3. Lots of folks are running the D3 (now Prospeed) tank.

Like mine, even though Ted says it's just a Big Heat-sink

. I know he is right but still like it because it’s really simple to top the system off and purge any air. Also since I have a lift in the summer I just pull the quick disconnect Pin on the lower HX hose open the D3 and bang quick drain.

I then fill with distilled water and a little water wetter for the summer. The best part is when winter comes for storage I just open the D3 and use a manual hand pump and empty the reservoir to a 5 gallon pail. Then add 100% coolant, start and repeat until my coolant tester gets the -20 degree setting.

SiC ZL1 · 04-27-2020, 09:09 PM

Quote:

Originally Posted by Valdizo

Hi anyone running one of these... do you recommend

I'm about to order one this week. I'll probably install it and my afco heat exchanger next week. I'll let you know.

owhite3003 · 05-11-2020, 02:21 PM

I have the D3 tank. Makes filling it up easy as can be.

SiC ZL1 · 05-12-2020, 10:07 PM

So I received my BK Fab intercooler reservoir yesterday and I'm very pleased with it. Its a nice aluminum reservoir. Its similar to old lingenfelter/rotofab ones. Just its not plastic. Comes with push lock connectors as well. I believe there is just one guy that actually makes these out of Missouri. I'm all for supporting a small business. They are 60-$70 cheaper than prospeed tanks. I like where it mounts better too. Looks like it'll easily hold a half gallon or more of coolant. I'll install it with my afco intercooler in the next few weeks.

FasNuf · 05-23-2020, 03:10 AM

Quote:

Originally Posted by SiC ZL1

So I received my BK Fab intercooler reservoir yesterday and I'm very pleased with it. Its a nice aluminum reservoir. Its similar to old lingenfelter/rotofab ones. Just its not plastic. Comes with push lock connectors as well. I believe there is just one guy that actually makes these out of Missouri. I'm all for supporting a small business. They are 60-$70 cheaper than prospeed tanks. I like where it mounts better too. Looks like it'll easily hold a half gallon or more of coolant. I'll install it with my afco intercooler in the next few weeks.

Have any pictures installed? That looks nice and my Rotofab leaks at the cap

SiC ZL1 · 05-24-2020, 04:59 PM

Quote:

Originally Posted by FasNuf

Have any pictures installed? That looks nice and my Rotofab leaks at the cap

Not yet. I was going to do it this memorial day weekend, but the fan on my central air unit took a crap. So maybe next weekend.

SiC ZL1 · 05-24-2020, 05:03 PM

Here's 2 pic to give you a general idea.

04-27-2020, 03:07 AM	#1
Valdizo Drives: Zl1 Join Date: Jul 2017 Location: Dallas Posts: 7	Bk fab supercharger tank Hi anyone running one of these... do you recommend

04-27-2020, 10:03 AM	#4
RobZL1 fo'shizZL1 Drives: 2017 ZL1 Join Date: Aug 2017 Location: ATL Posts: 1,791	Prospeed used to be D3. Lots of folks are running the D3 (now Prospeed) tank. __________________ 2017 ZL1 M6 Black \| Maggie 2650 // 103TB // Big Gulp // CSP LT's & Ultra Cats // BMR MM // BC Forged KL13 Mods being installed- oil pump, cam, ported heads, dual in-tank, Goliath and XDI, corn, etc., etc.

05-12-2020, 10:07 PM	#8
SiC ZL1 Drives: 2012 Blk ZL1 M6 Join Date: Sep 2019 Location: Hellinois Posts: 19 View My Garage	So I received my BK Fab intercooler reservoir yesterday and I'm very pleased with it. Its a nice aluminum reservoir. Its similar to old lingenfelter/rotofab ones. Just its not plastic. Comes with push lock connectors as well. I believe there is just one guy that actually makes these out of Missouri. I'm all for supporting a small business. They are 60-$70 cheaper than prospeed tanks. I like where it mounts better too. Looks like it'll easily hold a half gallon or more of coolant. I'll install it with my afco intercooler in the next few weeks. Attached Images __________________ 2012 BLK ZL1 M6: Rotofab CAI,20in Z28 Reps,5% tint,6K leds/hids,VMaxx TB,JLT CC,BTR Stage2PDSTQ Cam & Valvetrain,Holley VC, AFCO HX,BK Fab HX Tank,MGW Flatstick,Kooks 2in coated headers catless,BMR bushings & arms,160*,2.45 upper,9.06 Lower,ID1050s,Shane Hinds tuned, Pedders Xa Coilovers,DSX Aux pump & Flex Fuel,Corsa.

05-24-2020, 05:03 PM	#11
SiC ZL1 Drives: 2012 Blk ZL1 M6 Join Date: Sep 2019 Location: Hellinois Posts: 19 View My Garage	Here's 2 pic to give you a general idea. Attached Images __________________ 2012 BLK ZL1 M6: Rotofab CAI,20in Z28 Reps,5% tint,6K leds/hids,VMaxx TB,JLT CC,BTR Stage2PDSTQ Cam & Valvetrain,Holley VC, AFCO HX,BK Fab HX Tank,MGW Flatstick,Kooks 2in coated headers catless,BMR bushings & arms,160*,2.45 upper,9.06 Lower,ID1050s,Shane Hinds tuned, Pedders Xa Coilovers,DSX Aux pump & Flex Fuel,Corsa.

04-27-2020, 05:11 AM	#2
d kings z28 Drives: 2014 white z28 Join Date: Apr 2019 Location: Washington Posts: 177	I have one on the way got it her. https://www.prospeedautosports.com/p...exchanger-tank

04-27-2020, 08:12 AM	#3
Bigtime53 Drives: 2013 ZL1 Join Date: Mar 2013 Location: Oklahoma Posts: 2,326	I like the look of that. That is going to be my next got to have for my car.

05-11-2020, 02:21 PM	#7
owhite3003 Z-BEAST Drives: 2013 JDP ZL-850 Track Spec ZL1, Join Date: Mar 2013 Location: Oregon City, OR Posts: 1,471	I have the D3 tank. Makes filling it up easy as can be.