NEED HELP INSTALLING REAR SPEAKERS - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Alfdawg · 09-14-2020, 02:53 PM

I'm trying to install some alpine type r 6×9 coaxials in the rear. The alpine speakers are not bi amped. They only have one positive and one negative. So I need help on how to wire the new speaker. I also have the rear speaker harness that came with the FARK kit. I also have all the speakers wired to an aftermarket amp thru the fark harness.

the85darkknight · 09-16-2020, 05:40 AM

Quote:

Originally Posted by Alfdawg

I'm trying to install some alpine type r 6×9 coaxials in the rear. The alpine speakers are not bi amped. They only have one positive and one negative. So I need help on how to wire the new speaker. I also have the rear speaker harness that came with the FARK kit. I also have all the speakers wired to an aftermarket amp thru the fark harness.

Connect your speakers using the grey wires from your aftermarket harness. You can cut one connector off. Either tape off or ignore the white wires. For neatness, I left the white wires attached to the plug, and I connected the grey ones to my after market rears. These are the instructions I received from Sub thump.

Alfdawg · 09-16-2020, 09:56 AM

Quote:

Originally Posted by the85darkknight

Connect your speakers using the grey wires from your aftermarket harness. You can cut one connector off. Either tape off or ignore the white wires. For neatness, I left the white wires attached to the plug, and I connected the grey ones to my after market rears. These are the instructions I received from Sub thump.

Does the tweeter and woofer work? Does wiring it that way give the speakers a full range signal?

the85darkknight · 09-16-2020, 10:55 AM

Quote:

Originally Posted by Alfdawg

Does the tweeter and woofer work? Does wiring it that way give the speakers a full range signal?

You will have full range. The white wires are only there to maintain full range of the factory tweeter/woofer with an aftermarket amp. Since you are installing your own speakers, this is the route for you.

Alfdawg · 09-16-2020, 11:01 AM

Quote:

Originally Posted by the85darkknight

You will have full range. The white wires are only there to maintain full range of the factory tweeter/woofer with an aftermarket amp. Since you are installing your own speakers, this is the route for you.

Thanks you so much. Appreciate the help.

09-14-2020, 02:53 PM	#1
Alfdawg Drives: 2014 camaro ss Join Date: Oct 2018 Location: Southfield Michigan Posts: 126	NEED HELP INSTALLING REAR SPEAKERS I'm trying to install some alpine type r 6×9 coaxials in the rear. The alpine speakers are not bi amped. They only have one positive and one negative. So I need help on how to wire the new speaker. I also have the rear speaker harness that came with the FARK kit. I also have all the speakers wired to an aftermarket amp thru the fark harness. Last edited by Alfdawg; 09-14-2020 at 03:07 PM.