2011 rear bumper to 2014 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

SS Mindset · 09-16-2021, 07:48 PM

I have a 2011 Camaro ss and I want to change the rear bumper to a 2014 rear bumper. Anyone knows where I can find a wire harness adapter to convert from 2011 to 2014 rear bumper??

Bigdumogre · 09-16-2021, 08:00 PM

Do
You need a new trunk lid too and tail lights

1JEWLDSSRS · 09-16-2021, 08:08 PM

Quote:

Originally Posted by Bigdumogre

Do
You need a new trunk lid too and tail lights

^^ and a spoiler for that new lid.. 10-13 won't fit.

AlanRubin · 09-17-2021, 02:27 AM

Quote:

Originally Posted by chevy24@Gen5diy

Here is a list of the part numbers need to install the new 2014 rear bumper on prior year camaro's. The prices listed are GM list prices. I don't have a hardware list yet, so that will be a rough quote for now, until we actually do a conversion and now what is all needed... Also GM for some very strange reason has put core charges on the rear bumper and diffuser. Unfortunately turning in your old bumper and diffuser wont give you the core charge money back, since it is not the exact part.

List:
Upper Bracket:22833655 $17.37

Fascia w/park assist sensor holes:23164145 $495 + $75 core
Fascia w/o park assist sensor holes:23164146 $498 + $75 core

Absorber:22829531 $122.53

Brackets: L&R 22829479,22829480 $13.82 each

Diffuser w/single tip:22829476 $126.07 + $75 core
Diffuser w/dual tip(1LE style):22829477 $139.60 + $75 core

Outer brackets L&R:22915167,22915168 $14.57 each

Outer brackets L&R:23186324,23186325 $34.60 each

Lower brackets:23104631 x 2 $8.65 each

Mounting screws,retainers and rivets:$100

Also new taillights will be required for the install.

Little bit of searching always helps...

SS Mindset · 09-17-2021, 07:10 AM

Quote:

Originally Posted by AlanRubin

Little bit of searching always helps...

Thanks for your reply, a little bit of reading also helps. I clearly said WIRE HARNESS ADAPTER… I have tail lights and complete bumper. The problem I’m having is that the 2011 Camaro ss comes with 2 plugs from car that controls the whole rear lights and bumpers. The 2014/15 Camaro ss have 4 plugs. My question is are there any plug adapters that will all me to go from 2 plug to 4 plug for the 2014/bumper install. Oh. And I ALREADY have the stuff listed in this post. It’s says nothing about wires or harness. All brackets and mounts

1JEWLDSSRS · 09-17-2021, 09:15 AM

Well in your first post you COULD have let us know that you did have ALL the stuff you needed and that the ONLY thing you did need, was the harness and you would have saved us from listing everything else. Just saying, a little more info on what you had would have been good. Good luck sir...

Aqua Blue RS/SS · 09-17-2021, 09:31 AM

No need to get shitty man, guys are just trying to help.

1JEWLDSSRS · 09-17-2021, 09:34 AM

Quote:

Originally Posted by Aqua Blue RS/SS

No need to get shitty man, guys are just trying to help.

Thanks Aqua...

romcjr · 09-17-2021, 06:40 PM

GEN 5 DIY ?

09-16-2021, 07:48 PM	#1
SS Mindset Drives: 2011 Chevy Camaro ss Join Date: Jun 2021 Location: Miami, Florida Posts: 9	2011 rear bumper to 2014 I have a 2011 Camaro ss and I want to change the rear bumper to a 2014 rear bumper. Anyone knows where I can find a wire harness adapter to convert from 2011 to 2014 rear bumper??

09-16-2021, 08:00 PM	#2
Bigdumogre Drives: 2012 Camaro SS Join Date: Dec 2019 Location: New York Posts: 1,452	Do You need a new trunk lid too and tail lights __________________ 2012 Camaro 2SS/RS - CSP Custom Cam 232/240 .615/.615 113 +3, Texas speed CNC heads, FTI billet triple disc converter, K&N cai, Katech ported TB, GPI Ported/rod modded manifold, Texas speed 1 7/8 headers, HFC, Flowmaster 2 chambers with x pipe, Mishimoto CC, MSD wires, Roto fab washer relocation, tru cool 40k trans cooler, apex scoop, Pedders extreme coil overs and much more!!

09-17-2021, 09:15 AM	#6
1JEWLDSSRS Drives: 2011 SS-RS Join Date: May 2011 Location: FLORIDA Posts: 13,830	Well in your first post you COULD have let us know that you did have ALL the stuff you needed and that the ONLY thing you did need, was the harness and you would have saved us from listing everything else. Just saying, a little more info on what you had would have been good. Good luck sir... __________________ TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.

09-17-2021, 09:31 AM	#7
Aqua Blue RS/SS Drives: ABM #93 Join Date: Oct 2018 Location: Lotaburger Posts: 3,188	No need to get shitty man, guys are just trying to help. __________________ ABM #2399 2SS/RS:SOLD ABM #93 2SS/RS Black Rally stripes, Titanium Interior 4,000 miles: GM GFX side skirts and diffuser waiting on paint, GM dovetail, GM heritage, RPI ZL1 style splitter. ‘87 IROC-Z Iroc blue. all original unmolested with 50K miles.

09-17-2021, 06:40 PM	#9
romcjr Drives: Two 1984 Z28 / 2014 2SS/RS AGM L99 Join Date: Feb 2021 Location: WALLER , TEXAS Posts: 281 View My Garage	GEN 5 DIY ? __________________ 2014 2SS/RS AGM L99 CAI Intake ELITE Catch Can POWERSTOP Brakes (5/31/21)