![]() |
|
|
#1 |
![]() Drives: 2010 Camaro SS/RS Join Date: Nov 2010
Location: South Florida
Posts: 205
|
Trade Modded Corvette C5 500RWH for 2010 Camaro 2SS
![]() SOLD I am looking to trade my 2003 Chevy Corvette C5 which is heavily modded for a 2010 or 2010 Camaro 2SS. I will also bring cash to the table. Please see details below about the car. For Sale: 2003 Electron Metallic Blue Coupe 416 LS3 500 RWH All Motor Very Fast I am the original owner of this perfect 2003 Chevrolet Corvette. I own the car outright. There are no liens and I have the title. This corvette is in almost mint condition with a lot of modifications. This car has made 500 RWH with 470 RWT on a Dynojet. I have dyno graph to show. This car is extremely fast and it is a head turner. At wide open throttle it sounds like a Nascar. This car is totally streetable with a nice sounding cam that’s not too lumpy. It can be used as a daily driver and gets over 20 MPG on the highway. Car should run a mid to high 10 in the quarter mile. Mike from Mike Norris Motorsports has done most of the work on this car as well as the tuning. Dan from Masport Speed Shop has done some fine tuning as well. You can contact either one of these tuners if you need more information about the car. This car is also equipped with a A pillar pod with fuel pressure and boost gauges and a Kenne Bell Boost a Pump if later down the line you decide you want to add nitrous or a supercharger. You will not be disappointed. I have most of the documentation for this car as well as the build sheets on the new motor. I dont drive the car anymore and it is garage kept. New LME 416 LS3 motor has 6,500 miles and has been broken in properly. Built RPM transmission and DTE rear end have approximately 15,000 miles. Mike from Norris Motorsports – 407-616-2518 Dan from Masport Speed Shop – 561-338-9321 My name is Ron and I can be contacted at 954-325-7722. Engine Modifications consist of the following: 1. Brand new LME built 416 LS3 consisting of the following: A) GM LS3 block bored and stroked to a 416 with an 11.7:1 compression ratio B) Callies Compstar forged crankshaft C) Callies Compstar H-beam rods with ARP bolts D) Wiseco forged pistons with Napier rings E) Clevite tri metal race main and rod bearings G) Durabond cam bearings H) ARP studs for main cap fasteners I) Comp cams 230 – 248 on a 114 + 4 custom Norris Motorsports grind camshaft J) Rollmaster double timing set K) Melling HV/HP ported oil pump L) ARP bolts cylinder head fasteners M) GM MLS head gaskets N) GM LS7 lifters O) Manley pushrods P) GM L92 rocker arms Q) GM L76 intake with fuel rail and 40# injectors R) GM ported LS2 throttle body S) LS2 front and valley covers T) GM L92 cylinder heads with Manley valves and titanium retainers and PAC springs flowing 363 CFM’s. Heads have 68CC chamber volume 2. Norris Motorsports red aluminum catch can 3. Halltech red Venom intake 4. NGK TR55 plugs 5. GM red performance wires 6. Optima battery Drive train modifications: 1. RPM Level 5 transmission rated at 600 RWH 2. Yank 3600 torque convertor 3. DTE Stage 2 rear end with 3:73 gears 4. B&M transmission cooler Fuel modifications: 1. 08 ZO6 fuel pump 2. MSD boost a pump 3. Racetronix harness Exhaust modifications: 1. American Racing Headers with 1 7/8” primaries with 3” collectors X-pipe and cats. 2. Corsa Indy mufflers with pro-series tips Suspension and brake modifications: 1. Brand new 08 ZO6 front and rear shocks 2. ZO6 04 sway bays front and rear 3. Brand new AC Delco ceramic brake pads front and rear 4. Baer Eradispeed rotors front and rear 5. ZO6 04 red brake calipers front and rear Cooling modifications: 1. Dewitt’s double core all aluminum radiator with built in engine oil cooler and transmission oil cooler. 2. Dewitt’s dual SPAL fans with aluminum radiator shroud. 3. Motorad 160 degree thermostat Exterior modifications: 1. Caravaggio rear spoiler 2. ZO6 grey Speedline rims with brand new Bridgestone Potenza rubber. 3. ZO6 front fog light screens 4. Stainless steel Corvette inserts in rear bumper cover 5. Car comes with factory blue targa top Interior modifications: 1. Autometer Cobalt fuel pressure and boost gauges with pod 2. Cartek line lock 3. Corvette rubber floor mats 4. Tinted side windows at 5% 5. Tinted hatch at 5% Also included are the 3 volume original GM repair manuals and car cover. Thank You Ronnie 954-325-7722 ![]()
Last edited by ronniels3; 12-12-2010 at 09:02 PM. |
|
|
|
|
|
#2 |
![]() Drives: 2017 Colorado ZR2, 2018 ZL1 Join Date: Jun 2009
Location: West Palm Beach
Posts: 135
|
Ummm..... kinda a downgrade? Maybe you need 4 seats?
Nice car man! Tim 2009 Z06 |
|
|
|
|
|
#3 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
awesome Vette, good luck
__________________
Jannetty Racing JRE Street Package
|
|
|
|
|
|
#4 |
|
Account Suspended
|
I would keep the Vette, but that is me
|
|
|
|
|
|
#5 | |
![]() Drives: 2010 Camaro SS/RS Join Date: Nov 2010
Location: South Florida
Posts: 205
|
Quote:
I am just looking for something different. My car is a beast to say the least. I have had the car for almost 8 years and its time for the next project. I love the way the new camaro looks and handles. By far the best camaro yet. I used to drive a 88 IROC back in the day in Brooklyn. |
|
|
|
|
|
|
#6 | |
![]() Drives: 2010 Camaro SS/RS Join Date: Nov 2010
Location: South Florida
Posts: 205
|
Quote:
Well if there is someone out there that can't sell there car and they want to trade plus I will bring cash to the table, give me a call. Ronnie 954-325-7722 |
|
|
|
|
|
|
#7 |
![]() |
Traded my 02 vette in for a 1ss and don't regret for one moment....now you get to start over and mod the new one..
|
|
|
|
|
|
#8 |
![]() Drives: 2010 Camaro SS/RS Join Date: Nov 2010
Location: South Florida
Posts: 205
|
|
|
|
|
|
|
#9 |
![]() Drives: 2010 camaro ss Join Date: Nov 2010
Location: mechanicville,ny
Posts: 19
|
Ronnie that is a sweet car.
Bump from another vette owner
__________________
"Too many hockey pucks to the head"
|
|
|
|
|
|
#10 |
![]() Drives: 2010 Camaro SS/RS Join Date: Nov 2010
Location: South Florida
Posts: 205
|
|
|
|
|
|
|
#11 |
![]() Drives: 2010 Camaro SS/RS Join Date: Nov 2010
Location: South Florida
Posts: 205
|
|
|
|
|
|
|
#12 |
|
..[ Z06-QTR ]..
|
that is a sweet vette. i had a c5 before with minor bolt-ons and it was fun to drive. now imagine 500whp!! GL
__________________
- 07 Silver C6 Z06, Darton sleeved LS7, 441ci, H/C/I, Duel Stage Nitrous, RPS BC3, TR6060, E85. (615whp/582wtq N/A)
- 09 Blk Z06, 427ci LSX, F2 Procharger, Brodix, Holley, ZR1 TR6060, ... (1204whp/1045wtq @ 24psi) - 06 Blk C6, Darton Sleeved LS2, 427ci, H/C/I, F1X, RPM Trans/Diff, RPS BC3. (New #s soon) - 10 Black Camaro LS3, 2SS/RS, H/C/I, bolt-ons, Spec. (470whp/450wtq). - 07 Black Corvette C6(SOLD). - 98 White/Red Corvette C5(SOLD). ![]() |
|
|
|
|
|
#13 |
![]() Drives: 2010 Camaro SS/RS Join Date: Nov 2010
Location: South Florida
Posts: 205
|
|
|
|
|
|
|
#14 |
![]() Drives: 2010 Camaro SS2-21" wheels-exhaust Join Date: Nov 2010
Location: Atl
Posts: 60
|
Nice vette!
|
|
|
|
|
|
|
|
![]() |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Gran Turismo 5... No Camaro? | 5thGenOwner | 5th Gen Camaro SS LS LT General Discussions | 111 | 12-06-2011 11:06 AM |
| GM memo to dealers | Moose | 5th Gen Camaro SS LS LT General Discussions | 41 | 02-04-2010 08:33 PM |
| Official Camaro Convertible CONCEPT Press Release | Tran | Camaro Convertible Forum | 12 | 11-18-2009 08:05 PM |
| "So did you get the real Camaro or just a V6?" | oldag92 | 5th Gen Camaro SS LS LT General Discussions | 180 | 07-11-2009 02:07 AM |