02-16-2014, 06:47 PM | #1 |
Go NY Giants & NY Rangers
Drives: 2013 ZL1 M6 Join Date: Nov 2013
Location: Maryland
Posts: 782
|
Anyone Put A ZL1 Badge On Their Front Fender?
I don't like the CAMARO lettering there, but was thinking of ZL1. Please post pictures. Will the ZL1 badge fit the angle of the fender? I don't think the fender is totally flat.
__________________
Molon Labe!
|
02-16-2014, 07:23 PM | #2 |
Drives: 2022 ZL1-VIVID ORANGE-A10-CARBON FI Join Date: Aug 2012
Location: DILWORTH,MN
Posts: 87
|
ZL1 EMBLEM
I have both emblems. The ZL1 emblem is the same as the deck lid.
|
02-16-2014, 07:54 PM | #3 |
Drives: 2013 Camaro ZL1 Join Date: Dec 2012
Location: Dallas, Texas
Posts: 2,155
|
To the OP, I thought of doing that after removing the Camaro fender lettering. I hesitated due to ZL1 being on the front grille, deck lid, too redundant for me personally. Pull the Camaro and look at it without it being there a day or two?
|
02-16-2014, 07:54 PM | #4 |
|
Nice idea. Looks good!
|
02-16-2014, 08:30 PM | #5 |
Go NY Giants & NY Rangers
Drives: 2013 ZL1 M6 Join Date: Nov 2013
Location: Maryland
Posts: 782
|
Looks nice. Did the ZL1 fit flush?
__________________
Molon Labe!
|
02-16-2014, 08:39 PM | #6 |
COTW 12/3/12
Drives: 2012 Ashen Gray ZL1 Join Date: Aug 2011
Location: Glen Carbon, IL
Posts: 3,279
|
Anyone Put A ZL1 Badge On Their Front Fender?
I have custom ZL1 badges from Emblempros on my fender. I did remove mine from the hood, I didn't want too many emblems. My Camaro script is gone too.
|
02-16-2014, 08:56 PM | #7 |
Go NY Giants & NY Rangers
Drives: 2013 ZL1 M6 Join Date: Nov 2013
Location: Maryland
Posts: 782
|
Really nice!!!
__________________
Molon Labe!
|
02-16-2014, 09:03 PM | #8 |
Drives: 2013 ZL1 M6 SIM AGM mono stripe Join Date: Jul 2012
Location: Boston
Posts: 453
|
In the process of moving the ZL1 badge from hood to front fenders. Have already removed the Camaro lettering. Looks good plain but I think the ZL1 badge will look good in that spot. It's where they put the Z/28 badges..
|
02-17-2014, 07:48 AM | #9 |
Drives: 2022 ZL1-VIVID ORANGE-A10-CARBON FI Join Date: Aug 2012
Location: DILWORTH,MN
Posts: 87
|
|
02-17-2014, 04:40 PM | #10 |
Drives: 13 ZL1 vert blac fastlane/LPE 750 Join Date: Jul 2011
Location: houston
Posts: 1,312
|
I like the ZL1 on the hood,its where the factory put it,Although the Camaro on the fenders I am not that much in love with as they all have it..I like the Z28 on the fenders as it's factory,(always been on the sides)and I know that the factory goes though a approval process of many people to see where badges are liked the most,at least i remember reading that a while back..
The most important thing should be where you like it on your own car,unless your selling it to someone else or producing it to sell it a large group of people ,while trying to please most of them. It's sort of like back in the 80's and 90's when certain groups started sticking the 5.0 mustang badges all over the car in different places.removing them i understand but having them all over the car i do not,re-installing in a different location is not a bad idea when done tastefully. I just purchased a 2014 quad ram ,and the first thing i did was have the dealer remove the huge ram on the side,even before they sent it to be converted so i could drive it... IF YOU LIKE IT DO IT..I LOVE THE CUSTOM ONE THAT WAS SHOWN..
__________________
http://www.camaro5.com/forums/showthread.php?t=346589 CHECK OUT THE BUILDING OF MY RANCH FOR DISABLED VETS, COMPLETE WITH A GUN RANGE .
Last edited by gen=5; 02-17-2014 at 04:50 PM. |
02-17-2014, 05:21 PM | #11 |
Drives: 2014 2SS rs 6M Join Date: Sep 2013
Location: Palm Beach
Posts: 168
|
Anyone debadge one of these?
|
02-18-2014, 11:14 AM | #12 |
Drives: 2014 ZL1 White Convertible Join Date: Aug 2013
Location: St Pete Fl
Posts: 682
|
I put this on my Front fender and I haven't gotten any opinions about it yet, but I personally like it.
|
11-29-2014, 07:57 PM | #13 |
Drives: 2014 ZL1 M6 Join Date: Jul 2014
Location: Virginia
Posts: 493
|
Anyone else?
Im thinking of removing the camaro badges from the fenders and moving the hood badges to that spot. But the hood badges dont look flat. So im worried how that will look. Tony
__________________
2014 ZL1 M6
Bone stock, for now! 2001 Z28 M6 !cags, !air, FTP 85mm Lid, Z06 85mm MAF, P&P TB !4x4, Strano Springs, Strano Sways, Koni 4/4s, Watts Link ARH LTs, ARH catted Y, SLP catback with Dual/Dual Muffler, SLP CME and Valance OE Wheels Machined Face C5 DDs, 18x10.5s, with 295/35-18s on all 4 corners! 352rwhp and 366rwtq |
11-29-2014, 08:06 PM | #14 |
Drives: 2016 Corvette Z06 M6 Join Date: May 2009
Location: Odenton, MD
Posts: 874
|
The hood badges are 100% flat
__________________
2013 Dodge Viper #44/150 Launch Edition IG:@absoluthank
20/21 BC Forged Wheels : BC Coilovers: TA Aero |
|
|
Thread Tools | |
|
|