10-22-2019, 07:32 AM | #1 |
Dan
Drives: 2010 Camaro 2SS IOM Join Date: Nov 2013
Location: Georgia, USA not the other one
Posts: 1,045
|
Boost and AFR gauge compat with HP Tuners
Any recommendations or feedback for a combo boost AFR gauge that works well with HP Tuners? I have an Innovate LM2 but it has issues playing well with HP Tuners...
Thanks
__________________
Dan
2010 IOM SS YSI-B, Pat G Cam, Ported CTS-V Heads, ARH LTs MBRP 3" exhaust http://www.camaro5.com/forums/showth...&highlight=ysi |
10-22-2019, 03:13 PM | #2 |
Have had good experiences with AEM gauges. They have a gauge right now that piggy backs your OBDII port to feed into HPT. It's the X-series 30-334
__________________
2010 Camaro 2SS
2018 Charger GT+ 2005 Cavailer LS S/C - Sold '87 HD FXRT - Wrecked pending repair |
|
10-22-2019, 07:00 PM | #3 |
Drives: 2011 Camaro 2SS LS3 Whipple Join Date: May 2019
Location: Connecticut
Posts: 1,925
|
I have glow shifts, i don't like that the afr blinks at 20 since the injectors shut off under decel. The afr also won't start up right sometimes and will just blink 20 until i restart. Can't say i like them much.
__________________
Whipple 2.9 CAI ID1050x injectors ZL1 Pump JRE FPCM JMS Voltage booster JRE Rough Idle blower cam BTR .660 springs CHE trunnion kit 1 7/8 Speed Engineering Borla Atak JRE scoop 1.5" lowering springs BMR trailing arms and toe links Cradle inserts 704WHP 603WTQ 93 octane
|
10-27-2019, 02:41 PM | #4 |
Drives: 2011 Camaro SS Join Date: Jul 2017
Location: Wichita,KS
Posts: 605
|
I have the glow shift gauges too. My AFR gauge hasn't done that other then going to 20 on deceleration. I'm probably going to get a Innovative so it will read Lambda.
__________________
2011 Camaro 2SS, 6.0 iron block forged bottom end, Dart heads, BTR intake, Huron twin turbo kit, Summit stage 3 twin turbo cam, Circle D stage 4 6L90, 3800 FTI converter. BMR suspension, Viking coil overs, Fore triple pump fuel system.
|
|
|
Thread Tools | |
|
|