will these work on my camaro? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

jshaf · 10-26-2010, 08:10 PM

found these on ebay and I LOVE the look of the vortex but not sure about the fitment
http://cgi.ebay.com/ebaymotors/20-TS...-/290491545112

cnrad · 10-26-2010, 08:24 PM

Quote:

Originally Posted by jshaf

found these on ebay and I LOVE the look of the vortex but not sure about the fitment
http://cgi.ebay.com/ebaymotors/20-TS...-/290491545112

In their description they say it fits 2010+ Camaro models.

Quote:

For sale is a set of TSW Vortex chrome wheels with Nitto 555 Xtreme Performance tires. Wheels are 20x8.5 with a 35 offset. Bolt pattern is 5x120 which fits 2008-2009 Pontiac G8, 2004-2006 Pontiac GTO, 2010+ Chevrolet Camaro, 2008+ Cadillac CTS, and most BMW's.

jshaf · 10-26-2010, 08:40 PM

Quote:

Originally Posted by xRoyalFlush

In their description they say it fits 2010+ Camaro models.

[/SIZE][/FONT][/SIZE][/FONT]

Ye I know it says that but I need a expert or semi expert to assure me that it will with out any problems. considering them have a couple days to decide.

cnrad · 10-26-2010, 08:56 PM

Quote:

Originally Posted by jshaf

Ye I know it says that but I need a expert or semi expert to assure me that it will with out any problems. considering them have a couple days to decide.

Oh, well goodluck

jshaf · 10-26-2010, 10:48 PM

Quote:

Originally Posted by xRoyalFlush

Oh, well goodluck

thanks

Sir Nuke · 10-27-2010, 08:54 AM

well they MAY work, I would get a hold of a TWS rep somewhere to be sure, BUT since you have a LT, I would bet you would be fine.....however, teh tires on those wheels will be a bit smaller in diameter than what would be on our cars, throwing off the speedo. so much so that when doing showing 60 mph, you would only be doing 56.5 mph, a 5.8% difference.

D2-AUTOSPORT · 10-27-2010, 11:56 AM

Quote:

Originally Posted by jshaf

found these on ebay and I LOVE the look of the vortex but not sure about the fitment
http://cgi.ebay.com/ebaymotors/20-TS...-/290491545112

I'm sorry to burst your bubble but the will mount on the car but they will look like training wheels with those small tires. I'd pass on this one if I were you.

rtcat600man · 10-27-2010, 02:24 PM

Quote:

Originally Posted by Sir Nuke

well they MAY work, I would get a hold of a TWS rep somewhere to be sure, BUT since you have a LT, I would bet you would be fine.....however, teh tires on those wheels will be a bit smaller in diameter than what would be on our cars, throwing off the speedo. so much so that when doing showing 60 mph, you would only be doing 56.5 mph, a 5.8% difference.

I think the differance will be even larger than the 5.8% you point out but not much.

stock wheel dia. is 28.7 "

These 255/35/20's will prodcue a 27.0" dia. That is a huge differance. Leaving a very large gap between the tire and body.

I would pass.

Sir Nuke · 10-27-2010, 03:45 PM

Quote:

Originally Posted by rtcat600man

I think the differance will be even larger than the 5.8% you point out but not much.

stock wheel dia. is 28.7 "

These 255/35/20's will prodcue a 27.0" dia. That is a huge differance. Leaving a very large gap between the tire and body.

I would pass.

You are right about the diameter you quoted.......do the math.....its EXACTLY 5.92335% difference, so my tire calculator is slightly off, it is .0012335% off. lol

jshaf · 10-27-2010, 03:57 PM

Thanks guys, might still bid on them and if I get em just replace the tires and sell the smaller ones later. the rims are the biggest part to me.

christianmotox · 10-27-2010, 04:03 PM

They should fit, the bolt pattern is 5x120

Good luck with the bid.

jshaf · 10-27-2010, 04:09 PM

Quote:

Originally Posted by christianmotox

They should fit, the bolt pattern is 5x120

Good luck with the bid.

thanks

10-26-2010, 08:10 PM	#1
jshaf Montani Semper Liberi Drives: 2011 Black 2SS/RS w/ IOM stripes Join Date: Feb 2010 Location: Masontown, WV Posts: 4,841	will these work on my camaro? found these on ebay and I LOVE the look of the vortex but not sure about the fitment http://cgi.ebay.com/ebaymotors/20-TS...-/290491545112 __________________ Stainless Works 1 7/8 Long Tude Headers, Stainless Works High Flow Cats, Stainless Works Retro Chambered Catback, Z/28 Air Intake, RDP Tuned, FR41 Chrome Rims, 1100W stereo, 35% Tint

10-27-2010, 08:54 AM	#6
Sir Nuke Master of All Things Drives: '26 Corvette Stingray Join Date: Jul 2009 Location: Southeast of Houston, Texas Posts: 22,680 View My Garage	well they MAY work, I would get a hold of a TWS rep somewhere to be sure, BUT since you have a LT, I would bet you would be fine.....however, teh tires on those wheels will be a bit smaller in diameter than what would be on our cars, throwing off the speedo. so much so that when doing showing 60 mph, you would only be doing 56.5 mph, a 5.8% difference. __________________

10-27-2010, 03:57 PM	#10
jshaf Montani Semper Liberi Drives: 2011 Black 2SS/RS w/ IOM stripes Join Date: Feb 2010 Location: Masontown, WV Posts: 4,841	Thanks guys, might still bid on them and if I get em just replace the tires and sell the smaller ones later. the rims are the biggest part to me. __________________ Stainless Works 1 7/8 Long Tude Headers, Stainless Works High Flow Cats, Stainless Works Retro Chambered Catback, Z/28 Air Intake, RDP Tuned, FR41 Chrome Rims, 1100W stereo, 35% Tint

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Installation Camaro Needed for Manual for a Justice Install Package in SF Bay Area	Info@PeddersUSA.com	USA - California	6	04-30-2010 09:02 PM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
Pedders Suspension Benchmark Track Testing and New Jersey Track Day	Info@PeddersUSA.com	USA - NY / NJ / PA	35	10-26-2009 06:20 PM
The DEFINITIVE EXPLANATION OF CAMARO SUSPENSION, ISSUES, AND UPGRADES	Info@PeddersUSA.com	Suspension / Brakes / Chassis	106	10-19-2009 07:08 PM

10-27-2010, 04:03 PM	#11
christianmotox Drives: ( . )( . ) Join Date: Feb 2010 Location: San Diego, CA Posts: 2,827	They should fit, the bolt pattern is 5x120 Good luck with the bid.