Catch can routing help, L99 Whipple - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

bigsquirrel · 12-08-2010, 09:02 PM

Any ideas guys? Got the RX can but the instructions leave a little to be desired. Where does the inlet route to, where does the outlet route to?

SC2150 · 12-08-2010, 09:23 PM

I don't have a Whipple for pictures, but it is pretty simple. The inlet of the can (center fitting) goes to the rear of the drivers side valve cover, and the outlet (outer fitting on the can) goes to the fitting that hose was running to.

It simply goes inline with the hose that now runs from the rear of the drivers side valve cover & the whipple vaccum source.

Let me know if you need more help.

bigsquirrel · 12-09-2010, 01:00 AM

Cool thank you sir, great looking catch can by the way.

bigsquirrel · 12-09-2010, 11:46 PM

I'm still getting a gross leak pcv system error, trying to sort that out before the install. I've double checked my hoses a dozen times and can't seem to figure out what I've done wrong. It doesn't really affect the car much so it's been low on my to do list.

SC2150 · 12-10-2010, 07:24 AM

Check the drain valve on the can to make sure it is closed. All ship with it in the closed position.

12-08-2010, 09:02 PM	#1
bigsquirrel My car runs on acorns.... Drives: 2010 SS RS Inferno Orange Join Date: Feb 2010 Location: Albuquerque Posts: 1,351 View My Garage	Catch can routing help, L99 Whipple Any ideas guys? Got the RX can but the instructions leave a little to be desired. Where does the inlet route to, where does the outlet route to?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stock L99 A6 Supercharger options, opinions, & experiences	2010 Bumblebee	Forced Induction - V8	110	01-25-2019 05:23 PM
L99 with Catch Cans	Scott@Bjorn3D	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	13	12-07-2010 07:53 AM
Standard vs Automatic Racing	HarrisraTx	Dragstrip and Launch Techniques Discussion	74	10-29-2010 10:26 PM
Elite Oil Catch Can	flht99b	Vendor and Seller review / feedback / experiences	20	06-08-2010 06:00 AM
L99 engine specifications	Tran	Wiki	0	10-19-2008 12:40 PM

12-08-2010, 09:23 PM	#2
SC2150 Account Suspended Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009 Location: Bradenton, FL Posts: 6,063	I don't have a Whipple for pictures, but it is pretty simple. The inlet of the can (center fitting) goes to the rear of the drivers side valve cover, and the outlet (outer fitting on the can) goes to the fitting that hose was running to. It simply goes inline with the hose that now runs from the rear of the drivers side valve cover & the whipple vaccum source. Let me know if you need more help.

12-09-2010, 01:00 AM	#3
bigsquirrel My car runs on acorns.... Drives: 2010 SS RS Inferno Orange Join Date: Feb 2010 Location: Albuquerque Posts: 1,351 View My Garage	Cool thank you sir, great looking catch can by the way.

12-09-2010, 11:46 PM	#4
bigsquirrel My car runs on acorns.... Drives: 2010 SS RS Inferno Orange Join Date: Feb 2010 Location: Albuquerque Posts: 1,351 View My Garage	I'm still getting a gross leak pcv system error, trying to sort that out before the install. I've double checked my hoses a dozen times and can't seem to figure out what I've done wrong. It doesn't really affect the car much so it's been low on my to do list.

12-10-2010, 07:24 AM	#5
SC2150 Account Suspended Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009 Location: Bradenton, FL Posts: 6,063	Check the drain valve on the can to make sure it is closed. All ship with it in the closed position.