no radio,hvac - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

TOXIC SS · 03-30-2016, 07:38 PM

Was installing A- piller gauges heard a loud pop, shorted out.

So now I don't have hvac, radio, remote start,Dic. Checked fuses, but the relays not sure any ideas.

yzark99 · 03-30-2016, 07:49 PM

I would pull all fuses and visibly inspect them. You might have gotten lucky and no real damage was done. If you don't find any blown, you probably fried the BCM. A dealer should be able to say for sure.

Always fuse your aftermarket wiring kids.

TOXIC SS · 03-30-2016, 09:03 PM

Thank you.

LiveWire195 · 04-02-2016, 02:33 PM

Quote:

Originally Posted by yzark99

I would pull all fuses and visibly inspect them. You might have gotten lucky and no real damage was done. If you don't find any blown, you probably fried the BCM. A dealer should be able to say for sure.

Always fuse your aftermarket wiring kids.

We should really have a like feature. Good info here.

Did you ever find out the problem?

TOXIC SS · 09-14-2016, 12:59 PM

yes it was a weak fuse, wheee

CreeperRS · 09-14-2016, 10:24 PM

Rule of thumb, when working on anything electrical remove the power source first!

03-30-2016, 07:38 PM	#1
TOXIC SS Drives: 2010 Camaro 2SS L99 Join Date: Jul 2014 Location: Lincoln, Ne Posts: 89 View My Garage	no radio,hvac Was installing A- piller gauges heard a loud pop, shorted out. So now I don't have hvac, radio, remote start,Dic. Checked fuses, but the relays not sure any ideas.

03-30-2016, 07:49 PM	#2
yzark99 I run 2 catch cans... Drives: 2012 1LT SIM Auto Join Date: Oct 2011 Location: OR there Posts: 1,038 View My Garage	I would pull all fuses and visibly inspect them. You might have gotten lucky and no real damage was done. If you don't find any blown, you probably fried the BCM. A dealer should be able to say for sure. Always fuse your aftermarket wiring kids. __________________ Overkill tuned • Air Scoop • CAI • VMAX PTB • JacFab Laminator FX + Extendolator • SOLO Hi-Flo Cats + Cat-Back Exhaust View my top 3 LFX performance mods and more: .

09-14-2016, 10:24 PM	#6
CreeperRS Drives: 20’ Chevrolet Camaro 2SS 1LE Join Date: Jan 2009 Location: San Diego Posts: 1,579	Rule of thumb, when working on anything electrical remove the power source first! __________________

03-30-2016, 09:03 PM	#3
TOXIC SS Drives: 2010 Camaro 2SS L99 Join Date: Jul 2014 Location: Lincoln, Ne Posts: 89 View My Garage	Thank you.

09-14-2016, 12:59 PM	#5
TOXIC SS Drives: 2010 Camaro 2SS L99 Join Date: Jul 2014 Location: Lincoln, Ne Posts: 89 View My Garage	yes it was a weak fuse, wheee