Anyone know Jannetty Racing hot cam specs? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

73duster · 01-17-2011, 01:05 PM

I've been searching around for info on cams for L99's. I see Jannetty has a wicked sounding hot cam for an ls3. It's a pricey setup if you want to go with that on an L99 because you need to do a conversion. I'd love to know what the specs on that cam are, and if it's worth the extra expense because i'm also looking to get a converter, full exhaust, intake and custom tune. All of that plus installation is a serious wallop financially, and i'd like some insight from anyone who's gone that route. There is a video on their website that blew me away. I'd love to do it if i can stretch my budjet, but there is no info on the specs of the cam on the site. Any help appreciated.

red&white · 01-17-2011, 01:38 PM

Well I took it one step at a time because I knew it was going to be pricey. I started with a CAI, full exhaust(flowmaster). The I got my headers(kooks 17/8 long tube) and tuned it. I dyno'd at 411rwhp and 411tq. Now I'm getting my cams and under drive pulley. which is going to cost about 2200 with labor. projecting 460-470 rwhp. My advise is take your time and research. Ive heard nothing but good things about Jannety. Hope that helps.

fastfaster · 01-17-2011, 02:21 PM

i did a jannetty cam. it was evil sounding and had power everywhere on the tach.

ipimpthisc · 01-17-2011, 02:34 PM

why just not ask Jeannetty to explain it all to u...i mean he is the expert no?

73duster · 01-17-2011, 04:31 PM

I just thought they would be too busy to get into details. I'll definately call them once i know when i can take it to them, probably once i get my tax return. I was leaning towards a MAST motorsports stage 1 vvt cam, but after watching that video of their "JRE HOT CAM", which claims around 445 rwhp, i really am unsure. It would be more involved because i have an L99, which would require an LS3 conversion.

01-17-2011, 01:05 PM	#1
73duster Drives: 2010 camaro ss automatic Join Date: May 2010 Location: bronx, N.Y. Posts: 182	Anyone know Jannetty Racing hot cam specs? I've been searching around for info on cams for L99's. I see Jannetty has a wicked sounding hot cam for an ls3. It's a pricey setup if you want to go with that on an L99 because you need to do a conversion. I'd love to know what the specs on that cam are, and if it's worth the extra expense because i'm also looking to get a converter, full exhaust, intake and custom tune. All of that plus installation is a serious wallop financially, and i'd like some insight from anyone who's gone that route. There is a video on their website that blew me away. I'd love to do it if i can stretch my budjet, but there is no info on the specs of the cam on the site. Any help appreciated.

01-17-2011, 01:38 PM	#2
red&white Drives: 2010 Camaro 2SS/RS Join Date: Mar 2010 Location: Pittsburg, CA Posts: 162	cams Well I took it one step at a time because I knew it was going to be pricey. I started with a CAI, full exhaust(flowmaster). The I got my headers(kooks 17/8 long tube) and tuned it. I dyno'd at 411rwhp and 411tq. Now I'm getting my cams and under drive pulley. which is going to cost about 2200 with labor. projecting 460-470 rwhp. My advise is take your time and research. Ive heard nothing but good things about Jannety. Hope that helps. __________________ Red&White LS3,CAI Intake by Cold Air Inductions, Kooks 1 7/8 Long Tube Headers, Flow Master Exhaust, Comp Cam Tune 231/236-112, Under Drive Pulley, VMAX Ported Throttle Body @ Synergy Motorsports & Newtech Performance 463RWHP 419TQ

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My Maggie install.........	PQ	Forced Induction - V8	1298	02-24-2014 11:03 PM
JANNETTY RACING & VORTECH YSI MAKE 742.5 RWHP	JANNETTYRACING	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	22	10-21-2010 04:40 PM

01-17-2011, 02:21 PM	#3
fastfaster Account Suspended Drives: xxxxxxxxxxxxxx Join Date: Jun 2010 Location: xxxxxxxxxxxxxxxxxxxx Posts: 479	i did a jannetty cam. it was evil sounding and had power everywhere on the tach.

01-17-2011, 02:34 PM	#4
ipimpthisc Banned Drives: @twinturbo, cammed, intrcooled@ Join Date: Apr 2009 Location: nyc, EAST COAST HEAVY HITTERS Posts: 739	why just not ask Jeannetty to explain it all to u...i mean he is the expert no?

01-17-2011, 04:31 PM	#5
73duster Drives: 2010 camaro ss automatic Join Date: May 2010 Location: bronx, N.Y. Posts: 182	I just thought they would be too busy to get into details. I'll definately call them once i know when i can take it to them, probably once i get my tax return. I was leaning towards a MAST motorsports stage 1 vvt cam, but after watching that video of their "JRE HOT CAM", which claims around 445 rwhp, i really am unsure. It would be more involved because i have an L99, which would require an LS3 conversion.