cam and exhaust sound clips - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

morepowerjoe · 08-14-2021, 06:44 AM

Hey guys I was wondering if anyone has any interest in a cam and exhaust compilation of sound clips? I know there is a exhaust compilation but not one with cams and that is a big part of the sound. If you do have any interest in contributing to this thread please post up your cam and specs with your exhaust system.

I'll go first.
GPI SS1 Camshaft with vvt 223/237 duration and .637/637 lift, 1 7/8 TSP exhaust headers with their 3" exhaust system

Modernmusclecar · 08-14-2021, 09:02 AM

Eps custom grind blower cam with longtubes and Corsa.

ADVMax · 08-14-2021, 09:34 AM

You realize if this thread takes off and hits a few hundred pages a feller could lose a day or two here right?

EDIT: so far the first two make me want to touch myseff. Nice chops!

morepowerjoe · 08-14-2021, 11:12 AM

Quote:

Originally Posted by ADVMax

You realize if this thread takes off and hits a few hundred pages a feller could lose a day or two here right?

EDIT: so far the first two make me want to touch myseff. Nice chops!

That's kinda what i was hopping. lol

pyroguy · 08-14-2021, 03:21 PM

I'll bite.

Here's my current setup (pre-Noweeds installation). Mods should be listed on YouTube or at minimum on my build thread.

Ashen 6.2 · 08-14-2021, 07:10 PM

Here is mine with my previous setup - GPI SS2VVT, Kooks headers & cats and Solo cat back exhaust -

Current setup - GPI SS3 PD cam, Kooks headers, no cats and Solo cat back exhaust. -

Mlgprodriver · 08-14-2021, 09:26 PM

Ouuuuu Pick me pick me!!!!
BTR stage 4 cam. Knock off ebay 1 3/4 headers.... Tsp didn’t have the headers I wanted in stock. Kinda was in a rush to hear the baby purr.

Leave a comment on the videos if ya guys don’t mine <3

These where before the tune, still waiting for my
Shop to finish the tune.

TheFlyingBananaSS · 08-14-2021, 10:52 PM

First clip is putting Philadelphia on notice that I have arrived to terrorize the city before the car is dropped off at CSP.

Second clip is some chop with the E85 tune.

morepowerjoe · 08-15-2021, 12:52 AM

Everybody is sounding great 👍 love it! Keep em coming!

tartagliazl1 · 08-15-2021, 09:13 AM

here is a clip from my old 83 z28 355 sb with a lunati cam and heart throb exhaust.

L99MARO · 08-15-2021, 10:24 AM

GPI SS1 vvt cam, tsp 2 inch LTH, x pipe, spintech pro street mufflers

ADVMax · 08-15-2021, 12:13 PM

so far

they ALL sound awesome!

InFiD3ViL · 08-15-2021, 02:42 PM

I need an updated video, but here is mine from just after the install. Cold start, has a nice lope after around the 1:20 mark. I wish the audio was better but it was blowing out my phone's mic.

tartagliazl1 · 08-15-2021, 02:52 PM

Here is my zl1 with the Texas speed stage 2 pds cam. Stock npp with x pipe and long tubes.

08-14-2021, 06:44 AM	#1
morepowerjoe Drives: 2012 Chevrolet Camaro l99 Join Date: Aug 2020 Location: Austin, TX Posts: 2,230	cam and exhaust sound clips Hey guys I was wondering if anyone has any interest in a cam and exhaust compilation of sound clips? I know there is a exhaust compilation but not one with cams and that is a big part of the sound. If you do have any interest in contributing to this thread please post up your cam and specs with your exhaust system. I'll go first. GPI SS1 Camshaft with vvt 223/237 duration and .637/637 lift, 1 7/8 TSP exhaust headers with their 3" exhaust system __________________ DSS Pistons, Eagle ESP L19 Rods, ARP Head and Main Studs, TSP PRC CNC Ported Heads milled .030, Cometic .040 Head Gaskets, GPI SS3 VVT Camshaft, GM Racing Lifters, CHE Trunnions, Melling 10355HV Oil Pump, Cold Air Inductions CAI, Fast LSXR Intake Manifold, Nick Williams 103 TB, TSP Longtubes, ZL1 Fuel Pump, Mishimoto Radiator and Oil Cooler, 3600 Circle D Converter, Tru Cool 40k Tranny Cooler, Fluid Dynamics Balancer, EBC 3GD Rotors with EBC Bluestuff NDX Pads, Bilstein B6 Shocks / Struts with Eibach ZL1 Drop Springs Build Thread https://www.camaro5.com/forums/showthread.php?t=609817

08-14-2021, 09:02 AM	#2
Modernmusclecar Drives: 2011 Camaro SS Join Date: Jul 2019 Location: Parts unknown Posts: 848	Eps custom grind blower cam with longtubes and Corsa. __________________ EPS CUSTOM GRIND CAM....K@N CAI....VMAX PTB.....FRANKENSTEIN STAGE 2 HEADS ...1 7/8 STAINLESS POWER CATTED LONGTUBE HEADERS...CORSA XTREME 3 INCH CATBACK.....CIRCLE D 3800 Pro Series stall...391 gears.....Ported/modded GPI intake .Forgestar drag pack with Mickey Thompson ET street drag radials AGP PERFORMANCE DYNO TUNED. 463 WHP 428 FTLBS TORQUE.

08-14-2021, 03:21 PM	#5
pyroguy Started#gottalovethatblue Drives: ABM #832 Join Date: Apr 2013 Location: TN Posts: 7,071 View My Garage	I'll bite. Here's my current setup (pre-Noweeds installation). Mods should be listed on YouTube or at minimum on my build thread. __________________ '10 Camaro 2SS/RS \| Aqua Blue #832 of 3,903 \| Silver Stripes Check out my build thread

08-14-2021, 07:10 PM	#6
Ashen 6.2 Drives: 2014 Camaro Z/SS Join Date: May 2014 Location: NW Arkansas Posts: 2,147 View My Garage	Here is mine with my previous setup - GPI SS2VVT, Kooks headers & cats and Solo cat back exhaust - Current setup - GPI SS3 PD cam, Kooks headers, no cats and Solo cat back exhaust. - __________________ 2014 Camaro SS L99, Ashen Grey w/Black Leather - Build thread - http://www.camaro5.com/forums/showthread.php?t=491561 GPI 416 w/Custom GPI Cam, GPI Ported Heads & Tuned by Ben, Holley Dominator ECU, Mag Heartbeat, ZL1 Fuel Pump/DSX Aux Pump, NW 103 TB, FIC 1650's, Alky Meth, Rossler T400 w/t-brake, Circle D Converter, Kooks Headers, Viking Coil Overs & all the BMR Goodies in the rear, Zl1 3.23 Diff, DSS Axles, Wiles Racing Driveshaft, Hendrix Offset Diff Bushings, AFE Solid Subframe Bushings, 875HP/843TQ 5FDP Last edited by Ashen 6.2; 08-23-2021 at 07:17 PM.

08-14-2021, 10:52 PM	#8
TheFlyingBananaSS Evil Genius of Chevrolet Drives: 2017 Z06, 2019 XTS, 2013 SS Join Date: Feb 2017 Location: New York Posts: 3,262	First clip is putting Philadelphia on notice that I have arrived to terrorize the city before the car is dropped off at CSP. Second clip is some chop with the E85 tune. __________________ GPI SS2 VVT cam, ECS Novi 1500 supercharger, Corsa Extreme, Detroit Speed and BMR suspension, Circle D triple disc, Melling oil pump, LS2 chain tensioner, ATI 10% UD, DSX E85 kit, High Energy coils, BTR springs, LS2 Lifter trays, Titanium retainers, hardened push rods, FIC 1000 injectors, ZL1 pump, Mighty Mouse catch can, AEM gauges, Tial BOV, Richmond 3.91 gears, Custom gauge bezels, Speed Engineering headers, Stainless Works HF cats, DSX Aux pump, 710rwhp on E85.

08-14-2021, 09:34 AM	#3
ADVMax Sporting Foole Drives: 2010 Camaro SS Join Date: Sep 2019 Location: Alabama Posts: 500	You realize if this thread takes off and hits a few hundred pages a feller could lose a day or two here right? EDIT: so far the first two make me want to touch myseff. Nice chops!

08-14-2021, 09:26 PM	#7
Mlgprodriver Drives: 2010 Camaro 2SS RS Join Date: Jul 2021 Location: Louisiana Posts: 65	Ouuuuu Pick me pick me!!!! BTR stage 4 cam. Knock off ebay 1 3/4 headers.... Tsp didn’t have the headers I wanted in stock. Kinda was in a rush to hear the baby purr. Leave a comment on the videos if ya guys don’t mine <3 These where before the tune, still waiting for my Shop to finish the tune.

08-15-2021, 12:52 AM	#9
morepowerjoe Drives: 2012 Chevrolet Camaro l99 Join Date: Aug 2020 Location: Austin, TX Posts: 2,230	Everybody is sounding great 👍 love it! Keep em coming! __________________ DSS Pistons, Eagle ESP L19 Rods, ARP Head and Main Studs, TSP PRC CNC Ported Heads milled .030, Cometic .040 Head Gaskets, GPI SS3 VVT Camshaft, GM Racing Lifters, CHE Trunnions, Melling 10355HV Oil Pump, Cold Air Inductions CAI, Fast LSXR Intake Manifold, Nick Williams 103 TB, TSP Longtubes, ZL1 Fuel Pump, Mishimoto Radiator and Oil Cooler, 3600 Circle D Converter, Tru Cool 40k Tranny Cooler, Fluid Dynamics Balancer, EBC 3GD Rotors with EBC Bluestuff NDX Pads, Bilstein B6 Shocks / Struts with Eibach ZL1 Drop Springs Build Thread https://www.camaro5.com/forums/showthread.php?t=609817

08-15-2021, 10:24 AM	#11
L99MARO #teamGPI Drives: 2010 Camaro SS Join Date: Aug 2020 Location: Bay area Posts: 147	GPI SS1 vvt cam, tsp 2 inch LTH, x pipe, spintech pro street mufflers

08-15-2021, 12:13 PM	#12
ADVMax Sporting Foole Drives: 2010 Camaro SS Join Date: Sep 2019 Location: Alabama Posts: 500	so far they ALL sound awesome!

08-15-2021, 02:52 PM	#14
tartagliazl1 Drives: 2013 zl1 vert Join Date: Dec 2018 Location: Rochester, New york Posts: 1,161	Here is my zl1 with the Texas speed stage 2 pds cam. Stock npp with x pipe and long tubes. __________________ 22% lower/ 2.5 upper/ 2” headers/ cat delete/ x-pipe/ 2 gallon x tank/ 100-3 pump/ fic 1300/ dsx aux kit/ 103mm throttle body/ big gulp 5” intake/ meth kit/ prometh lid injection/FI interchiller/ 160* stat/ ngk-7/ msd wires/ elite catch can/ tsp cam/ Che trunnions/ ported supercharger/ 1/2” lid spacer/ cnc,milled ported heads/ brick mod/BMR toe and trailing arms/ 781hp 748 tq SAE @17.3lb on a loaded dyno.