Vector Motorsports in Michigan - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

coptzr · 06-05-2011, 11:43 AM

Well, where to start this story.........I purchased Vector's stage 2.5 cam kit about a year ago and installed with no issues.Kirk was very helpfull in my cam choice knowing what mods I was doing in the future. I just installed an Edelbrock E-force and was finally able to trailer down and get tuned. Paul and Steve are two of the nicest gear heads you will ever meet. When I arrived I was ill, I mean sick as a dog. 103 temp and the works. I got the car unloaded and Steve was on it right away at my appointment time. I was super dehydrated and asked Paul if there was a vending machine.He said,"sorry no, what do ya need?" Next thing I know, Paul drove to the store I picked me up some Gatorade!! C'mon now THATS customer service!!! After about 3 hours, a plug change an a couple road test (more gearhead talk) car made 582RWHP and 524RWTQ. I stopped at Mobil on the way down and got a crappy tank of 93 fuel so Steve had a hard time getting any timing in it without spark knock, so numbers were a little low. Still, the moral of the story, If your in Michignan, near Michigan or making a trip here, stop and see the crew at Vector Motorsports, you will NOT be disapointed.

fldrummer · 06-05-2011, 01:57 PM

Yeah, those are some stand-up guys. I've had dozens of tweaks to my tune from them. I even put my car on a new local Mustang dyno at Lashway Motorsports & had everything scanned. After looking at the results, even those guys admitted everything looked nearly perfect and they probably wouldn't be able to get more than 3-4 more ponies out of the tune...

On another note, I've had my eye on their cam for a while (still on my wish list). How do you like it? I take it that cam works well w/ the E-force as well, let alone N/A?

mikeSS · 06-05-2011, 03:13 PM

ya vector is a very good shop. i went there first to get my tune. 5 mins after i got there they were putting my car on the dyno. and i got to watch the whole process of my dyno tune in action. one thing i like about there shop is they let you watch. i went back a few months later, you get LTs and a tune, the car was done in 2 and a half hours! there prices are great too.

but now i am at livernois. just feel they offer more down the line.

06-05-2011, 11:43 AM	#1
coptzr Resistance is futile Drives: Anything thats fast Join Date: May 2009 Location: Big Rapids,MI Posts: 315	Vector Motorsports in Michigan Well, where to start this story.........I purchased Vector's stage 2.5 cam kit about a year ago and installed with no issues.Kirk was very helpfull in my cam choice knowing what mods I was doing in the future. I just installed an Edelbrock E-force and was finally able to trailer down and get tuned. Paul and Steve are two of the nicest gear heads you will ever meet. When I arrived I was ill, I mean sick as a dog. 103 temp and the works. I got the car unloaded and Steve was on it right away at my appointment time. I was super dehydrated and asked Paul if there was a vending machine.He said,"sorry no, what do ya need?" Next thing I know, Paul drove to the store I picked me up some Gatorade!! C'mon now THATS customer service!!! After about 3 hours, a plug change an a couple road test (more gearhead talk) car made 582RWHP and 524RWTQ. I stopped at Mobil on the way down and got a crappy tank of 93 fuel so Steve had a hard time getting any timing in it without spark knock, so numbers were a little low. Still, the moral of the story, If your in Michignan, near Michigan or making a trip here, stop and see the crew at Vector Motorsports, you will NOT be disapointed. __________________ Modifications (so far) Edelbrock E-Force supercharger JRE fuel system upgrade Edelbrock CAI VMS stage 2.5 cam kit SLP LT's, no cats NPP muffler's w/x-pipe Tuned at Vector Motorsports 606 RWHP and 567 RWT Black 1LE 10 spokes. Hotchkis drop springs.

06-05-2011, 01:57 PM	#2
fldrummer "Black Ace" Drives: Supercharged 2010 SS, 2016 Golf R Join Date: Aug 2008 Location: Ft. Lauderdale, FL Posts: 1,350	Yeah, those are some stand-up guys. I've had dozens of tweaks to my tune from them. I even put my car on a new local Mustang dyno at Lashway Motorsports & had everything scanned. After looking at the results, even those guys admitted everything looked nearly perfect and they probably wouldn't be able to get more than 3-4 more ponies out of the tune... On another note, I've had my eye on their cam for a while (still on my wish list). How do you like it? I take it that cam works well w/ the E-force as well, let alone N/A? __________________ 2010 2SS/RS M6 "Black Ace" - Delivered 6/4/2009 Mods: Forged 416 LS3, Maggie TVS 2300 SC (~11 psi), custom cam (232/247, .630/.630, 118 LSA), 90-lb. injectors, ZL1 fuel pump & ADM controller, Alky Control meth kit, Monster LT1-SC twin-disk clutch, ZL1 drivetrain conversion w/ DSS 1000-HP axles & 1-pc. driveshaft, CAI Inc. intake w/ ADM scoop, XS Power full exhaust (1 7/8" LT headers with 3" off-road pipes), VMAX CNC-ported TB, LSR adjustable sway bars, LPE rear end-links, BMR 1" drop, BMR polyurethane bushings; UMI trailing arms & toe rods. Built & tuned by Kraftworks. 755 rwhp/708 rwtq Last edited by fldrummer; 06-05-2011 at 02:13 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pro-Hobbyist Michigan Racing Bill Introduced	SEMA Action Network	USA - Great Lakes	5	11-22-2010 06:08 PM
USMA Michigan Nationals Charity Car Show	philthy	USA - Great Lakes	6	07-23-2010 03:49 PM
Where we are coming from (check inside)	ljustin293	2010 Camaro5 Fest (I)	106	05-13-2010 12:31 AM
USMA Michigan Nationals Car Show	philthy	USA - Great Lakes	3	07-17-2009 09:07 AM
Michigan FBody Meet & Greet, May 30th, Milford Michigan	meissen	USA - Great Lakes	23	05-30-2009 11:24 PM

06-05-2011, 03:13 PM	#3
mikeSS Drives: 2015 c7 Join Date: Nov 2009 Location: MI Posts: 7,462	ya vector is a very good shop. i went there first to get my tune. 5 mins after i got there they were putting my car on the dyno. and i got to watch the whole process of my dyno tune in action. one thing i like about there shop is they let you watch. i went back a few months later, you get LTs and a tune, the car was done in 2 and a half hours! there prices are great too. but now i am at livernois. just feel they offer more down the line.