qtp exhaust cutouts - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

goose2011 · 09-23-2009, 05:55 PM

hey if anybody is goin to get a new exhaust donw waste ur money on a full system get Qtp electric cutouts i got em and these things r soooo badass it sounds like a race car

Chip Wrecked · 09-23-2009, 08:06 PM

I have them on my Jeep and I agree, make a big difference. Just need to be able to pull them off and replace with a standard pipe segment to pass inspection here.

DetroitMuscle2010 · 09-24-2009, 10:58 AM

have them available and in stock

MyPrecious · 09-24-2009, 11:02 AM

Quote:

Originally Posted by goose2011

hey if anybody is goin to get a new exhaust donw waste ur money on a full system get Qtp electric cutouts i got em and these things r soooo badass it sounds like a race car

It's nice to boast a product you like, and perhaps others will want them as well, can you post pics so we can see them, thnx....

TEAMBADDASS · 09-24-2009, 04:45 PM

Quote:

Originally Posted by MyPrecious

It's nice to boast a product you like, and perhaps others will want them as well, can you post pics so we can see them, thnx....

here's mine

Quick Time · 09-25-2009, 09:53 AM

Glad everyone is enjoying our product.

Here is the video for all to see.

Send us your pictures, videos, dyno numbers we love to see them.

Keep it loud!!

goose2011 · 09-25-2009, 09:37 PM

you guys by far have the best exhaust out thur for the new camaro

Ject · 09-25-2009, 09:44 PM

Where to buy? I've been meaning to purchase these soon as I put LT Headers on.
But not sure what ones to get, Low Pro Ovals? or just the regulars... etc.. ?

Hell and i believe its 2.5" for stock exhaust to mount them on.. yeah?

Michael#1 · 09-26-2009, 10:55 AM

hey goose how much was it for an install?

goose2011 · 09-27-2009, 12:15 AM

we jus had to pay for the parts and the labor was free sorry michael

jnewberr2ssrs · 09-27-2009, 12:34 AM

QTP - this might be a stupid question...but will most exhaust shops know how to do the wiring on this? if not, does the kit come with some pretty straight forward instructions for the wiring so that i could do it myself after the exhaust shop did the welding?

thanks i think i might be going with your kit it looks and sounds great and i love the controller where you get to pick your own percentage of how far you want it opened! i would definitely be getting that controller to go with it!

goose2011 · 09-27-2009, 11:07 AM

id think most exhaust shop could figure it out...well id hope they can

TEAMBADDASS · 09-27-2009, 07:27 PM

Quote:

Originally Posted by Quick Time

Glad everyone is enjoying our product.

Here is the video for all to see.

Send us your pictures, videos, dyno numbers we love to see them.

Keep it loud!!

I have it on my denali also,love it..sounds crazy

Quick Time · 09-29-2009, 09:46 AM

Quote:

Originally Posted by jnewberr2ssrs

QTP - this might be a stupid question...but will most exhaust shops know how to do the wiring on this? if not, does the kit come with some pretty straight forward instructions for the wiring so that i could do it myself after the exhaust shop did the welding?

thanks i think i might be going with your kit it looks and sounds great and i love the controller where you get to pick your own percentage of how far you want it opened! i would definitely be getting that controller to go with it!

Its never dumb to ask questions

We made a post with tons of pictures of the complete install. Includes the wiring.
http://www.camaro5.com/forums/showthread.php?t=38977

You can do the wiring yourself. its not hard.

09-25-2009, 09:53 AM	#6
Quick Time Keep It Loud! Drives: 2016 Camaro SS Join Date: Jul 2009 Location: Hawthorne, NJ Posts: 72	Glad everyone is enjoying our product. Here is the video for all to see. Send us your pictures, videos, dyno numbers we love to see them. Keep it loud!! __________________ Quick Time Performance

09-25-2009, 09:44 PM	#8
Ject aka Patrick Drives: '10 Camaro 2SS '04 Silverado Join Date: Jan 2009 Location: Derby Kansas Posts: 3,072	Where to buy? I've been meaning to purchase these soon as I put LT Headers on. But not sure what ones to get, Low Pro Ovals? or just the regulars... etc.. ? Hell and i believe its 2.5" for stock exhaust to mount them on.. yeah? __________________ Current Modifications: Your average Bolt-ons & Suspension Upgrades GForce Engineering: 9" Rear End, Strange Pro Iron Case w/Moser Nodular 3.70:1 Detroit locker, 3.5" Solid Drive Shaft Last edited by Ject; 09-25-2009 at 09:55 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
QTP Electric Exhaust Cutouts Pictures and Videos!!!	Quick Time	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	51	08-08-2015 10:09 PM
New low profile electric exhaust cutouts for your Camaro @ PFYC.com	Redshift	V8 Bolt-Ons & Tunes	8	08-14-2014 05:19 PM
QTP Electric Exhaust Cutouts on a 2010 camaro	Quick Time	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	27	05-22-2010 02:44 PM
How to Install QTP Electric Cutouts	Quick Time	Camaro DIY & HOW-TO instructions & discussions	73	05-03-2010 01:19 PM
EXHAUST	Milk 1027	Wiki	2	03-07-2010 10:20 PM

09-23-2009, 05:55 PM	#1
goose2011 Drive it like u stole it Drives: 2010 camaro 2ss and 1968 camar Join Date: Aug 2009 Location: indy Posts: 119 View My Garage	qtp exhaust cutouts hey if anybody is goin to get a new exhaust donw waste ur money on a full system get Qtp electric cutouts i got em and these things r soooo badass it sounds like a race car

09-23-2009, 08:06 PM	#2
Chip Wrecked Drives: 68' RS, 10' 2SS ABM Join Date: Jul 2009 Location: Kirkwood, PA Posts: 22	I have them on my Jeep and I agree, make a big difference. Just need to be able to pull them off and replace with a standard pipe segment to pass inspection here.

09-24-2009, 10:58 AM	#3
DetroitMuscle2010 Drives: 2010 Camaro SS Join Date: Sep 2009 Location: Detroit, MI Posts: 81	have them available and in stock

09-25-2009, 09:37 PM	#7
goose2011 Drive it like u stole it Drives: 2010 camaro 2ss and 1968 camar Join Date: Aug 2009 Location: indy Posts: 119 View My Garage	you guys by far have the best exhaust out thur for the new camaro

09-26-2009, 10:55 AM	#9
Michael#1 Drives: Black 2010 SS/RS Join Date: Sep 2008 Location: Fort Wayne, Indiana Posts: 100	hey goose how much was it for an install?

09-27-2009, 12:15 AM	#10
goose2011 Drive it like u stole it Drives: 2010 camaro 2ss and 1968 camar Join Date: Aug 2009 Location: indy Posts: 119 View My Garage	we jus had to pay for the parts and the labor was free sorry michael

09-27-2009, 12:34 AM	#11
jnewberr2ssrs Drives: 2010 Chevrolet Camaro 2SS RS Join Date: Jul 2009 Location: Albuquerque, NM Posts: 397	QTP - this might be a stupid question...but will most exhaust shops know how to do the wiring on this? if not, does the kit come with some pretty straight forward instructions for the wiring so that i could do it myself after the exhaust shop did the welding? thanks i think i might be going with your kit it looks and sounds great and i love the controller where you get to pick your own percentage of how far you want it opened! i would definitely be getting that controller to go with it!

09-27-2009, 11:07 AM	#12
goose2011 Drive it like u stole it Drives: 2010 camaro 2ss and 1968 camar Join Date: Aug 2009 Location: indy Posts: 119 View My Garage	id think most exhaust shop could figure it out...well id hope they can