ADM Performance strikes again with my rear end - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Coop · 12-23-2011, 07:39 PM

Well as a loyal ADM brother I had Andy look for and get a set of gears for me. As usual he was successful in his quest for parts and it all came together today. After driving 3 hours to get to his shop we pulled the car in and no sooner had I stepped out the door Andy was lifting the car up. I swear he was moving 90mph. The whole process took a little less than 90 minutes. I was back on the road for the 3 hour drive back to Lawton. As always Andy does magnificent work and only the best parts. No pics were taken due to the insane speed at which Andy worked (plus I didn't have my camera). Before I left we discussed my next mod....wheels so I will pick something out and have Andy give me the approval or disapproval.

If anyone is on the fence about ADM Performance it is time to step down and join the brotherhood.

Driveshaftshop · 12-23-2011, 08:07 PM

We have worked with them on a few things, great guys......

LittleMT · 12-23-2011, 10:02 PM

Andy the Amazing.....

RPM Transmissions · 12-24-2011, 10:20 PM

firefighter1 · 12-24-2011, 10:48 PM

I second all that!

sasquash1984 · 12-25-2011, 10:15 AM

Once u go adm u always end up going back.....for more mods

SGDM · 12-29-2011, 11:30 AM

They are amazing to watch...economy of motion.

MikeYoungSS1 · 12-29-2011, 11:45 AM

Great to hear! What gears did you go with?

ADM is pretty much the only shop that will ever touch my camaro for anything performance or otherwise. Those guys go above and beyond. I have sent emails to Andy asking questions at odd times and I have admittedly been difficult to work with sometimes and he always responds quickly and puts the customer first.

Coop · 12-29-2011, 01:41 PM

3.70

12-23-2011, 07:39 PM	#1
Coop Drives: 2010 Camaro 1SS Join Date: Aug 2009 Location: Lawton/Fort Sill, OK Posts: 1,632	ADM Performance strikes again with my rear end Well as a loyal ADM brother I had Andy look for and get a set of gears for me. As usual he was successful in his quest for parts and it all came together today. After driving 3 hours to get to his shop we pulled the car in and no sooner had I stepped out the door Andy was lifting the car up. I swear he was moving 90mph. The whole process took a little less than 90 minutes. I was back on the road for the 3 hour drive back to Lawton. As always Andy does magnificent work and only the best parts. No pics were taken due to the insane speed at which Andy worked (plus I didn't have my camera). Before I left we discussed my next mod....wheels so I will pick something out and have Andy give me the approval or disapproval. If anyone is on the fence about ADM Performance it is time to step down and join the brotherhood. __________________ 2010 Camaro 1SS Inferno Orange Magnusson Supercharger Installed and Tuned by ADM Performance, Roto Fab CAI IOM painted, MBRP Cat Back Exhaust, Barton Industries Short Shifter, Clear Image Headers, Pedders coilovers, BMR Front/Rear sway bars Trailing Arms and End Links, VMax ported TB

12-23-2011, 10:02 PM	#3
LittleMT user bann'd Drives: Chevy SS Join Date: May 2009 Location: Hepcat City Posts: 1,463	Andy the Amazing..... __________________ Chantilly Lace, the 2011 Rockabilly Jukebox..ADM built..617rwhp, geared A6.

12-24-2011, 10:48 PM	#5
firefighter1 Drives: 625 rwhp red jewel ss COTW 11-8-10 Join Date: Oct 2009 Location: Abilene, Texas Posts: 824	Hell yeah! I second all that! __________________

12-25-2011, 10:15 AM	#6
sasquash1984 502 RWHP N/A Drives: The yeti Join Date: May 2009 Location: Saginaw/ Ft Worth TX Posts: 3,085 View My Garage	Once u go adm u always end up going back.....for more mods __________________ factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's

12-29-2011, 11:30 AM	#7
SGDM Drives: 2016 2SS Join Date: Nov 2011 Location: North Texas Posts: 1,422	They are amazing to watch...economy of motion. __________________ Who Dares...Wins

12-23-2011, 08:07 PM	#2
Driveshaftshop Drives: own more cars than i can list Join Date: Nov 2010 Location: Charlotte NC Posts: 1,124	We have worked with them on a few things, great guys......

12-24-2011, 10:20 PM	#4
RPM Transmissions Drives: 2010 SS Join Date: Nov 2011 Location: Anderson, IN. Posts: 72

12-29-2011, 11:45 AM	#8
MikeYoungSS1 Drives: 2010 Black SS ADM Built Join Date: Nov 2011 Location: DFW Posts: 56	Great to hear! What gears did you go with? ADM is pretty much the only shop that will ever touch my camaro for anything performance or otherwise. Those guys go above and beyond. I have sent emails to Andy asking questions at odd times and I have admittedly been difficult to work with sometimes and he always responds quickly and puts the customer first.

12-29-2011, 01:41 PM	#9
Coop Drives: 2010 Camaro 1SS Join Date: Aug 2009 Location: Lawton/Fort Sill, OK Posts: 1,632	3.70 __________________ 2010 Camaro 1SS Inferno Orange Magnusson Supercharger Installed and Tuned by ADM Performance, Roto Fab CAI IOM painted, MBRP Cat Back Exhaust, Barton Industries Short Shifter, Clear Image Headers, Pedders coilovers, BMR Front/Rear sway bars Trailing Arms and End Links, VMax ported TB

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ratios	midlife	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	8	08-17-2013 04:27 PM
$40.00 OFF Cold Air Inductions Packages! ADM Performance Scoop \| Roto-Fab Reservoir!	AutoAgenda	V6 Bolt-Ons & Tunes	119	06-17-2013 01:18 PM
Modifying for " Dummies"	Dr Jkel	Tuning / Diagnostics -- engine and transmission	209	06-18-2012 12:24 AM
Camaro5Fest III location nomination	Atti2de	2012 Camaro5 Fest (III)	2717	05-31-2012 12:59 AM
Richmond Rear End Gears - 3.73 & 4.10	Sean@Phastek	Transmission / Driveline	0	06-02-2010 11:47 AM