![]() |
|
|
#1 |
![]() Drives: 2011 Camaro LS Join Date: Feb 2015
Location: Greensboro
Posts: 55
|
Eagle eye inverter
So just installed my eagle eye and the driver halo stopped working even though their is power so i guess i need better inverters i searched some on ebay and see some that say female inverter and male inverter which one i need my halo wont even flicker
|
|
|
|
|
|
#2 |
![]() |
Did you solder the power into the parking lights? That's what I did and I've had no issues at all. I've heard of problems when people tap into the sidemarkers, but I'm not 100% sure about that one..
|
|
|
|
|
|
#3 |
![]() Drives: 2011 Camaro LS Join Date: Feb 2015
Location: Greensboro
Posts: 55
|
No i just put tapped it n taped it up and it worked for a day then messing with the hid's and it turned off
|
|
|
|
|
|
#4 |
![]() Drives: 2011 Blk 1LS A6 Join Date: Mar 2014
Location: Orange, Ca
Posts: 269
|
Try checking your connections to see if maybe it's loose. Could be that simple to fix.
|
|
|
|
|
|
#5 |
|
Team LFX
Drives: Fast Join Date: Mar 2012
Location: TX
Posts: 621
|
^This. If that doesn't solve the problem then search "CCFL inverter" on ebay. Just about any of them should work.
|
|
|
|
|
|
#6 |
![]() |
Could be a power issue too. Try re wiring them through a 4 pin relay. That what I'm going to do soon, as I've barely used my car since I put the lights in a couple months ago (stored during the winter) and now my driver side halo won't turn on at all as of a couple of nights ago. I'm figuring it's just a power issue which might be your problem too.
|
|
|
|
|
|
|
|
![]() |
|
|