Delco-Loc II - Not My Friend This Spring - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

MAXZ28 · 04-04-2012, 02:50 PM

The battery on my 4th generation Z-28 went dead over the winter and after a recent recharge, the Delco-Loc II radio is displaying this and the radio doesn't work:

I tried everything in the owners manual to no avail. I don't have the security code as I bought this car used 14 years ago and never had this happen to me despite several dead batteries over the years.

I'm going to try to leave the ACC on for an hour to see if I can get the backup code to display as I can't get any numbers to come up when pushing the 2 & 3 presets for 8 seconds as a thread here instructed.

Until then, does anyone have any suggestions for me. I know I can take it to the dealership and have them take care of it but I'd rather invest the $$$ in a new stereo if it's something I can't fix with some guidance from folks here.

Thanks all!

demonspeed · 04-04-2012, 02:59 PM

Go to a the dealer with your registration and they will give you the security code.

MAXZ28 · 04-04-2012, 06:27 PM

Well, I disconnected the battery for a few minutes and when I reconnected the battery, the radio displays "LOC".

I pressed the 2 & 3 preset buttons for 8 seconds and the radio displayed the backup code: 141 191.

Called the 1-800 Delco Service Support number and got a reset code of 020 604.

I tried programming in the code but it just reverts to the " -:--" display.

OffseT · 04-04-2012, 06:58 PM

question off topic but you wouldnt happen to be located in frisco,tx would you?

MAXZ28 · 04-04-2012, 07:25 PM

Quote:

Originally Posted by Maroboy2001

question off topic but you wouldnt happen to be located in frisco,tx would you?

Yeppers.

04-04-2012, 02:50 PM	#1
MAXZ28 Drives: 1995 Z-28 Join Date: Apr 2012 Location: FRISCO Posts: 3	Delco-Loc II - Not My Friend This Spring The battery on my 4th generation Z-28 went dead over the winter and after a recent recharge, the Delco-Loc II radio is displaying this and the radio doesn't work: I tried everything in the owners manual to no avail. I don't have the security code as I bought this car used 14 years ago and never had this happen to me despite several dead batteries over the years. I'm going to try to leave the ACC on for an hour to see if I can get the backup code to display as I can't get any numbers to come up when pushing the 2 & 3 presets for 8 seconds as a thread here instructed. Until then, does anyone have any suggestions for me. I know I can take it to the dealership and have them take care of it but I'd rather invest the $$$ in a new stereo if it's something I can't fix with some guidance from folks here. Thanks all!

04-04-2012, 02:59 PM	#2
demonspeed not afraid of the wall Drives: Camaros Join Date: Apr 2010 Location: Pittsburgh Posts: 2,148	Go to a the dealer with your registration and they will give you the security code. __________________ 2023 1LE 1SS BCD GCF JF5 MN6 SIA SLN UQT 10/13/22: 1100 Past Camaros: 13 1LE\|02 SS\|01 Z28\|00 SS\|91 1LE\|91 Z28\|89 IROC-Z

04-04-2012, 06:58 PM	#4
OffseT Maroboy2001 AKA Offset Drives: Boosted Trans Am Join Date: Oct 2011 Location: Las Cruces, NM Posts: 1,149	question off topic but you wouldnt happen to be located in frisco,tx would you? __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
We want the truth about Shunt fbodfather!!!!! Photos of Shunt!!!!	Blizzard	5th Gen Camaro SS LS LT General Discussions	1436	10-28-2022 12:43 PM
The Elimination Game: Camaro colors	Ant	Cosmetics and Lighting Modification Discussions	2739	04-10-2014 10:37 AM
Lowering springs question	newagemuscle	Suspension / Brakes / Chassis	17	02-11-2011 10:30 PM
Funny Convo I had with a friend of mine who does graphics.	Mindz	Off-topic Discussions	10	08-20-2009 03:04 PM

04-04-2012, 06:27 PM	#3
MAXZ28 Drives: 1995 Z-28 Join Date: Apr 2012 Location: FRISCO Posts: 3	Well, I disconnected the battery for a few minutes and when I reconnected the battery, the radio displays "LOC". I pressed the 2 & 3 preset buttons for 8 seconds and the radio displayed the backup code: 141 191. Called the 1-800 Delco Service Support number and got a reset code of 020 604. I tried programming in the code but it just reverts to the " -:--" display.