My New Cam Video - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

cm5217 · 07-01-2012, 05:56 PM

I just got my 2010 SS A6 back from PAS in Richmond VA. They did a LS3 conversion with a custom grind PAS spec comp cam, Circle D 3600 T.C. and Tuned by Frost. Before anyone asks i dont have a dyno sheet didnt even ask for one cause dyno numbers are for show but ET numbers are for dough

I will let you know how is does at the track just waiting until it cools down some damn hot as hell

BAD DAB · 07-01-2012, 07:05 PM

Sounds sweet! What and where is PAS in the Richmond area?

cm5217 · 07-01-2012, 07:14 PM

Performance Autosport Inc. 2179 Tomlynn st Richmond Va 23230
804-358-2505 and the website is performanceautosport.com. Steve Williams AKA Tune by Frost works out of their shop and he is one of the best tuners out there. They took good care of me

Infern0 · 07-01-2012, 07:16 PM

Actually, dyno is for measuring before and after gains of a particular mod. It's purely a diagnostic tool. Just like checking your blood pressure. It is also helpful when determining if there were any unidentified issues with the car, like with tuning. Wouldn't you be concerned if the cam dyno only showed a 30HP increase?

Congrats on the cam! Happen to know the grind specs? I had my headers tuned by frost and they mentioned they had a cam package as well but he didn't recall the specs off the top of his head. What did it run you at the end of the day?

1954 Belair-man · 07-01-2012, 07:22 PM

Nothing like the sound of a lopy cam.

cm5217 · 07-01-2012, 07:29 PM

Quote:

Originally Posted by Infern0

Actually, dyno is for measuring before and after gains of a particular mod. It's purely a diagnostic tool. Just like checking your blood pressure. It is also helpful when determining if there were any unidentified issues with the car, like with tuning. Wouldn't you be concerned if the cam dyno only showed a 30HP increase?

Congrats on the cam! Happen to know the grind specs? I had my headers tuned by frost and they mentioned they had a cam package as well but he didn't recall the specs off the top of his head. What did it run you at the end of the day?

He told me the specs but i dont remember them said it was a good size cam like a mild stage 3. he said it was about 425 to the wheels but remember im an auto so i lost some in the T.C. like i said its ET's im looking for....Steve is the man and I highly recommend them for any work

cm5217 · 07-01-2012, 07:31 PM

Also It was hot and humid as hell when it was on the dyno so im going to go back when it cools down and get the real number when i do i will post up the sheet so you all can see the curve. I will ask about the specs of the cam too

BAD DAB · 07-01-2012, 07:39 PM

Quote:

Originally Posted by cm5217

Performance Autosport Inc. 2179 Tomlynn st Richmond Va 23230
804-358-2505 and the website is performanceautosport.com. Steve Williams AKA Tune by Frost works out of their shop and he is one of the best tuners out there. They took good care of me

Thanks for the info, I'll check them out.

MR.CamaroSS · 07-01-2012, 08:35 PM

sounds awsome, when do you plan on running it?

Infern0 · 07-01-2012, 10:30 PM

Yeah, Steve is a good guy. I was a little apprehensive about voiding the warranty with the tune for my headers and he said if I ever needed to flash back to stock he wouldn't mind doing it for free, and then putting my tune back afterward.

cm5217 · 07-02-2012, 05:19 PM

Quote:

Originally Posted by MR.CamaroSS

sounds awsome, when do you plan on running it?

Not sure I live about 5 miles from MIR so maybe the next test and tune or friday midnight madness not sure yet

Beescuz · 07-02-2012, 06:28 PM

Sounds good. I was down there the other day and saw it sitting on the dyno.

They have done all the work to my car and it rocks. The entire PAS group is great guys.

edog · 07-02-2012, 07:16 PM

Very nice...

thesnoopster · 07-03-2012, 07:19 AM

Very nice Chris! I told you Steve was good... sounds good

..... Now you need drag radials.... the pirelli's aint gonna hold at MIR

07-01-2012, 05:56 PM	#1
cm5217 2K10 SS Drives: 2010 2SS/RS A6 SIM black stripes Join Date: Mar 2009 Location: Southern Maryland Posts: 356	My New Cam Video I just got my 2010 SS A6 back from PAS in Richmond VA. They did a LS3 conversion with a custom grind PAS spec comp cam, Circle D 3600 T.C. and Tuned by Frost. Before anyone asks i dont have a dyno sheet didnt even ask for one cause dyno numbers are for show but ET numbers are for dough I will let you know how is does at the track just waiting until it cools down some damn hot as hell __________________ Tuned with HP tuners by Ryan at GPI...LS3 Conversion GPI SS3 Comp Cam...GPI Heads... GPI modded Intake...GPI built Transmission...Circle D 5C T.C....1 7/8 Kooks LT headers...Vararam tune CAI...Bo White TB...Powerbond 25% UDP...3.91 Gears...Magnaflow 3" Catback...RX catch can...BMR Trailing Arms...BMR Toe Rods...BMR Pro rear cradle bushing kit...Smoked Lenses...Black Chrome SS rims...Black Bowties...Painted Stripes...Barton shifter...Hydro Dipped engine cover...Clear Shield bra (front clip and hood)... Last edited by cm5217; 07-01-2012 at 06:52 PM.

07-01-2012, 07:05 PM	#2
BAD DAB Drives: 2010 Camaro 2SS/RS Black & Silver Join Date: Aug 2010 Location: Richmond, VA Posts: 8,230 View My Garage	Sounds sweet! What and where is PAS in the Richmond area? __________________ STAINLESS WORKS HEADERS-TUNED BY JANNETTY RACING-C.A.I. INTAKE-TAYLOR 409 WIRES-SOLO AXLE BACK EXHAUST-ELITE CATCH CAN

07-01-2012, 07:14 PM	#3
cm5217 2K10 SS Drives: 2010 2SS/RS A6 SIM black stripes Join Date: Mar 2009 Location: Southern Maryland Posts: 356	Performance Autosport Inc. 2179 Tomlynn st Richmond Va 23230 804-358-2505 and the website is performanceautosport.com. Steve Williams AKA Tune by Frost works out of their shop and he is one of the best tuners out there. They took good care of me __________________ Tuned with HP tuners by Ryan at GPI...LS3 Conversion GPI SS3 Comp Cam...GPI Heads... GPI modded Intake...GPI built Transmission...Circle D 5C T.C....1 7/8 Kooks LT headers...Vararam tune CAI...Bo White TB...Powerbond 25% UDP...3.91 Gears...Magnaflow 3" Catback...RX catch can...BMR Trailing Arms...BMR Toe Rods...BMR Pro rear cradle bushing kit...Smoked Lenses...Black Chrome SS rims...Black Bowties...Painted Stripes...Barton shifter...Hydro Dipped engine cover...Clear Shield bra (front clip and hood)...

07-01-2012, 07:16 PM	#4
Infern0 Bring It Drives: In Between Join Date: Sep 2009 Location: San Antonio, TX Posts: 2,929 View My Garage	Actually, dyno is for measuring before and after gains of a particular mod. It's purely a diagnostic tool. Just like checking your blood pressure. It is also helpful when determining if there were any unidentified issues with the car, like with tuning. Wouldn't you be concerned if the cam dyno only showed a 30HP increase? Congrats on the cam! Happen to know the grind specs? I had my headers tuned by frost and they mentioned they had a cam package as well but he didn't recall the specs off the top of his head. What did it run you at the end of the day? __________________ 2017 Camaro ZL1 M6 - Everything but the sunroof - Sold 2010 Camaro SS - 650RWHP Daily Driver - Traded

07-01-2012, 07:31 PM	#7
cm5217 2K10 SS Drives: 2010 2SS/RS A6 SIM black stripes Join Date: Mar 2009 Location: Southern Maryland Posts: 356	Also It was hot and humid as hell when it was on the dyno so im going to go back when it cools down and get the real number when i do i will post up the sheet so you all can see the curve. I will ask about the specs of the cam too __________________ Tuned with HP tuners by Ryan at GPI...LS3 Conversion GPI SS3 Comp Cam...GPI Heads... GPI modded Intake...GPI built Transmission...Circle D 5C T.C....1 7/8 Kooks LT headers...Vararam tune CAI...Bo White TB...Powerbond 25% UDP...3.91 Gears...Magnaflow 3" Catback...RX catch can...BMR Trailing Arms...BMR Toe Rods...BMR Pro rear cradle bushing kit...Smoked Lenses...Black Chrome SS rims...Black Bowties...Painted Stripes...Barton shifter...Hydro Dipped engine cover...Clear Shield bra (front clip and hood)...

07-01-2012, 07:22 PM	#5
1954 Belair-man Drives: 2010 Camaro IOM 1SS M6 Join Date: Aug 2010 Location: Michigan Posts: 889	Nothing like the sound of a lopy cam.

07-01-2012, 08:35 PM	#9
MR.CamaroSS Drives: 2010 Camaro 2SS/RS Join Date: Jan 2012 Location: dunkirk,Maryland Posts: 99	sounds awsome, when do you plan on running it?

07-01-2012, 10:30 PM	#10
Infern0 Bring It Drives: In Between Join Date: Sep 2009 Location: San Antonio, TX Posts: 2,929 View My Garage	Yeah, Steve is a good guy. I was a little apprehensive about voiding the warranty with the tune for my headers and he said if I ever needed to flash back to stock he wouldn't mind doing it for free, and then putting my tune back afterward. __________________ 2017 Camaro ZL1 M6 - Everything but the sunroof - Sold 2010 Camaro SS - 650RWHP Daily Driver - Traded

07-02-2012, 06:28 PM	#12
Beescuz Drives: 2021 ZL1 1LE Join Date: Aug 2010 Location: Fredericksburg, Virginia Posts: 409 View My Garage	Sounds good. I was down there the other day and saw it sitting on the dyno. They have done all the work to my car and it rocks. The entire PAS group is great guys.

07-02-2012, 07:16 PM	#13
edog Drives: 2010 2SS/RS IOM Join Date: Oct 2008 Location: F'BURG VA Posts: 3,832 View My Garage	Very nice... __________________ Update...Build in process, Forged Rods, Pistons and rings, Johnson Lifters, NOVI1500 ECS SC, 13lb boost or more, LS3 Conversion 114/228/241 COMP CAM, Frostbite 4 row Aluminum radiator, 6L80 built, Circle D 6L80 PRO SERIES MULTI 258MM 2D, Stock 3.45 gears, 1-7/8 American Racing Headers w/HF cat, X-Pipe, Lingenfelter dual fuel pump, E-85 flex sensor, ATI super damper pulley, Ported TB, 160 therm, Trans cooler, Pedder's sways/end links/sub frame bushings, BMR trailing arms & toe rods, Coil overs. HP/TQ pending

07-03-2012, 07:19 AM	#14
thesnoopster Drives: '17 Fifty SS - '18 Traverse Redline Join Date: Jul 2009 Location: Northern Virginia Posts: 3,616	Very nice Chris! I told you Steve was good... sounds good ..... Now you need drag radials.... the pirelli's aint gonna hold at MIR __________________ 2017 Camaro SS -"FIFTY" Mods: "93 Octane"