You are browsing camaro5 
 |
|
04-04-2019, 11:53 AM
|
#1 |
 Drives: 2010 Camaro SS Join Date: May 2018
Location: North Carolina
Posts: 29
|
ADM Pulley Bolt Pattern
So I have a 2010 Camaro with a LSA swap and I'm wanting to turn the boost up some more. I have a ADM pulley on the car right now and was wondering if it matches up with any other pulley manufactures bolt pattern. I think Lingenfelter and Weapon X make a 10 bolt too just not sure if its the same. I would buy from ADM but they don't have the pulley I want listed. Thanks.
|
|
|
|
04-04-2019, 11:42 PM
|
#2 |
 
|
He sometimes doesn't have everything listed. Calling him is your best way to confirm
__________________
2012 Camaro SS Automatic
AGP Twin Turbo LSX427 / ADM Magic / 4L80 “1360 Rwhp 1225 Rwtq 25 lbs of boost” |
|
|
|
|
04-07-2019, 08:33 AM
|
#3 |
 Drives: 2015 Camaro 1LE Join Date: Jun 2016
Location: NJ
Posts: 152
|
ADM used the same as LFP hubs
|
|
|
|
|
04-09-2019, 12:41 PM
|
#4 |
|
Drives: 2010 Camaro SS Join Date: May 2018
Location: North Carolina
Posts: 29
|
^ Awesome thank ya man. I'm about to try and push the limits of what's possible with the Factory 6 rib drive. I've been fitting a 100mm idler that I had from my Cobra to try and maximize belt wrap, I'm shooting for 14-15 psi. I'll post a build thread when I get everything lined up. I'm trying to run a 10.0-10.5 at the fest this year
|
|
|
|
|
04-09-2019, 02:17 PM
|
#5 | |
|
Drives: 2015 Camaro 1LE Join Date: Jun 2016
Location: NJ
Posts: 152
|
Quote:
|
|
|
|
|
|
|
|
|
 |
|
|
