Looking for 6.2L Emblem - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

snaphappy · 08-12-2012, 12:14 PM

I removed the chevy bowtie from the back of my Camaro and I'm replacing it with an SS emblem from Sparks restoration. Ordered it yesterday.

That means the little SS above the right taillight has to go. In its place I want to put a 6.2L emblem. I contacted Emblem Pros, but they only offer a flat version of the 6.2L. I want a 3D version that matches the look of the SS emblem. Any idea where I can get one?

Here are some images, I know it says 2LT, but they have the same emblem that says 6.2L. See how it's flat? I want my 6.2L to be 3D just like the SS in the picture.

snaphappy · 08-12-2012, 12:34 PM

After spending some time on Google I don't think I'm going to find a 6.2L emblem exactly like I want it.

What else could I put there?

The LS3 emblems don't look that great to me either :(

iCamaro · 08-12-2012, 12:43 PM

I'm guessing if you remove the SS there is going to be a hole? I'm not sure never seen one removed. If that's the case you could always take to a body shop and have it filled in a painted. I think that would look good. Just having nothing but the center SS.

snaphappy · 08-12-2012, 12:47 PM

No hole. They're just stuck on there with 3M adhesive tape. Same with the rear bowtie that I just removed

snaphappy · 08-12-2012, 12:48 PM

Anyone have a picture of one of these on their car? This is the one from emblem pros. Thanks!

iCamaro · 08-12-2012, 11:42 PM

These say 3D Embossed

http://www.ebay.com/itm/2-CHEVY-CAMA...#ht_5646wt_774

dragonZ28 · 08-13-2012, 12:13 PM

What those eBay ones are are is a hollow very thin fragile aluminum. Think pop can-ish.
They are thinly painted/printed, not a solid color all the way through.
Also not a mirror finish.
Also not the correct size for the Camaro.
However, if you think you might like those give them a shot.

Thanks, Roger

ssmike · 08-13-2012, 01:46 PM

Will this one work? I have an extra one I'm selling. http://www.camaro5.com/forums/showthread.php?t=238974

08-12-2012, 12:14 PM	#1
snaphappy Drives: 2011 Camaro Convertible SS2/RS LS3 Join Date: Jun 2012 Location: Olive Branch, Ms Posts: 742	Looking for 6.2L Emblem I removed the chevy bowtie from the back of my Camaro and I'm replacing it with an SS emblem from Sparks restoration. Ordered it yesterday. That means the little SS above the right taillight has to go. In its place I want to put a 6.2L emblem. I contacted Emblem Pros, but they only offer a flat version of the 6.2L. I want a 3D version that matches the look of the SS emblem. Any idea where I can get one? Here are some images, I know it says 2LT, but they have the same emblem that says 6.2L. See how it's flat? I want my 6.2L to be 3D just like the SS in the picture. Attached Images

08-12-2012, 12:43 PM	#3
iCamaro Drives: 2012 LT RS Camaro Join Date: Jun 2012 Location: Bentonville, Arkansas Posts: 1,249	I'm guessing if you remove the SS there is going to be a hole? I'm not sure never seen one removed. If that's the case you could always take to a body shop and have it filled in a painted. I think that would look good. Just having nothing but the center SS. __________________

08-12-2012, 12:48 PM	#5
snaphappy Drives: 2011 Camaro Convertible SS2/RS LS3 Join Date: Jun 2012 Location: Olive Branch, Ms Posts: 742	Anyone have a picture of one of these on their car? This is the one from emblem pros. Thanks! Attached Images

08-12-2012, 11:42 PM	#6
iCamaro Drives: 2012 LT RS Camaro Join Date: Jun 2012 Location: Bentonville, Arkansas Posts: 1,249	These say 3D Embossed http://www.ebay.com/itm/2-CHEVY-CAMA...#ht_5646wt_774 __________________

08-12-2012, 12:34 PM	#2
snaphappy Drives: 2011 Camaro Convertible SS2/RS LS3 Join Date: Jun 2012 Location: Olive Branch, Ms Posts: 742	After spending some time on Google I don't think I'm going to find a 6.2L emblem exactly like I want it. What else could I put there? The LS3 emblems don't look that great to me either :(

08-12-2012, 12:47 PM	#4
snaphappy Drives: 2011 Camaro Convertible SS2/RS LS3 Join Date: Jun 2012 Location: Olive Branch, Ms Posts: 742	No hole. They're just stuck on there with 3M adhesive tape. Same with the rear bowtie that I just removed

08-13-2012, 12:13 PM	#7
dragonZ28 Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06 Join Date: Apr 2009 Location: Lexington, KY Posts: 2,426	What those eBay ones are are is a hollow very thin fragile aluminum. Think pop can-ish. They are thinly painted/printed, not a solid color all the way through. Also not a mirror finish. Also not the correct size for the Camaro. However, if you think you might like those give them a shot. Thanks, Roger

08-13-2012, 01:46 PM	#8
ssmike BL1ZZRD Drives: '16 Camaro 2SS, '20 Equinox Redline Join Date: Jul 2009 Location: Buffalo, NY Posts: 7,841	Will this one work? I have an extra one I'm selling. http://www.camaro5.com/forums/showthread.php?t=238974