You are browsing camaro5 
 |
|
05-10-2016, 11:12 PM
|
#1 |
 
Drives: 2015 1LE Join Date: Aug 2012
Location: California
Posts: 353
|
Need your help
I've looked and can't find anything so reaching out to you guys. Can someone send me a link to instructions on how to remove the splitter on a 2015 1LE? if someone here has done it, do you have to remove the bumper in order to remove the splitter? Please and thank you!
|
|
|
|
05-11-2016, 12:31 AM
|
#2 |
|
aerosportconcepts@gmail
 
Drives: '15 1SS-RS/1LE (RRM) Join Date: Dec 2011
Location: Menifee, SoCal
Posts: 1,387
|
It's a little tough. The way the top edge clips over the hardware under is kinda a one way clip. If you have the correct trim fastener tools it's doable but tough.
Basically the Rivets at the bottom center of the nose need to be drilled out. There is also a rivet at each end that need to be removed also. From there you use the trim tools to get behind the edge working the clip loose. Go slow and make sure not to mess them up. Hope this helps some Thx Kurt Robinson
__________________
 |
|
|
|
|
05-11-2016, 06:27 PM
|
#3 |
|
Drives: 2015 1LE Join Date: Aug 2012
Location: California
Posts: 353
|
Thanks for the help!
|
|
|
|
|
|
|
|
 |
|
|
