Help needed with HID instal - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ZaBeast07 · 10-07-2010, 09:35 PM

I recently bought the H13 HID conversion kit from VVME.com and got it in the mail. After un-boxing and taking a look at what I got and the installation steps I headed out to the garage to install. Thinking the kit is "plug and play" as they say I didn't think it'd take me to much time. Once I got out there and started the install I realized the kit isn't very plug and play. After email the company and get a diagram of how to install, I'm still having problems.

This is the diagram they sent me:

The problem I am having in the Step 4 on the diagram...Where do those 2 tabs go??
Any help would be greatly appreciated!!

IBM/2SS/RS/LS3 · 10-07-2010, 09:37 PM

Those go into the plug you pulled out of the OEM bulb. Did they also include the connector?

ZaBeast07 · 10-07-2010, 09:40 PM

Quote:

Originally Posted by IBM/2SS/RS/LS3

Those go into the plug you pulled ou of the OEM bulb. Did they also include the connector?

Thats the thing, they dont fit into the plug that the stock light bulb went into. There wasn't any connector included, should there have been??

IBM/2SS/RS/LS3 · 10-08-2010, 03:06 PM

If they were "plug and play"

ZaBeast07 · 10-08-2010, 04:04 PM

Ya thats what I though also, it says "plug and play" all over the website. I called them and got a lady that spoke barely any English that couldn't help me then I emailed them and he recommended this harness. After ordering and receiving that I found out it was just an extension for the stock wiring. So this was my last resort, to see if anyone on here had any past experience with their kits.

Captain McFunk · 10-08-2010, 04:17 PM

they are plug and play, the connector you unplugged the stock light from, if you look in it, has 2 metal pins. You push the pins in step 4 onto the pins in the stock connection.

IBM/2SS/RS/LS3 · 10-08-2010, 04:47 PM

I'd goto Autozone or whatever and look for just the connectors

ZaBeast07 · 10-08-2010, 06:05 PM

Quote:

Originally Posted by IBM/2SS/RS/LS3

I'd goto Autozone or whatever and look for just the connectors

I think ill give that a try! Thank you i appreciate it, I'll keep you updated!

ZaBeast07 · 10-08-2010, 07:06 PM

I went over to the Advanced Autoparts and Autozone and neither store had anything close let alone a connector kit for the 2010s. Where did u get that picture at? was that off a website selling the connector kit?

10-07-2010, 09:35 PM	#1
ZaBeast07 Mid-Florida Camaro Club Drives: IPF SC'd 2010 LLT 2015 1SS/RS Join Date: Sep 2010 Location: Hunter's Creek, Florida Posts: 1,311 View My Garage	Help needed with HID instal I recently bought the H13 HID conversion kit from VVME.com and got it in the mail. After un-boxing and taking a look at what I got and the installation steps I headed out to the garage to install. Thinking the kit is "plug and play" as they say I didn't think it'd take me to much time. Once I got out there and started the install I realized the kit isn't very plug and play. After email the company and get a diagram of how to install, I'm still having problems. This is the diagram they sent me: The problem I am having in the Step 4 on the diagram...Where do those 2 tabs go?? Any help would be greatly appreciated!!

10-07-2010, 09:37 PM	#2
IBM/2SS/RS/LS3 NorCal Camaro➎ Member Drives: Bowties ONLY!! Join Date: May 2009 Location: Nor☆Cal Posts: 1,767 View My Garage	Those go into the plug you pulled out of the OEM bulb. Did they also include the connector? __________________ Last edited by IBM/2SS/RS/LS3; 10-08-2010 at 03:05 PM.

10-08-2010, 03:06 PM	#4
IBM/2SS/RS/LS3 NorCal Camaro➎ Member Drives: Bowties ONLY!! Join Date: May 2009 Location: Nor☆Cal Posts: 1,767 View My Garage	If they were "plug and play" __________________

10-08-2010, 04:17 PM	#6
Captain McFunk Break Necks, Cash Checks Drives: 2010 black Camaro 2SS/RS Join Date: Apr 2010 Location: Little Rock, AR Posts: 701 View My Garage	they are plug and play, the connector you unplugged the stock light from, if you look in it, has 2 metal pins. You push the pins in step 4 onto the pins in the stock connection. __________________ 2009 CTS-V - White Diamond - intake, exhaust, wheels, visual mods

10-08-2010, 04:47 PM	#7
IBM/2SS/RS/LS3 NorCal Camaro➎ Member Drives: Bowties ONLY!! Join Date: May 2009 Location: Nor☆Cal Posts: 1,767 View My Garage	I'd goto Autozone or whatever and look for just the connectors __________________

10-08-2010, 04:04 PM	#5
ZaBeast07 Mid-Florida Camaro Club Drives: IPF SC'd 2010 LLT 2015 1SS/RS Join Date: Sep 2010 Location: Hunter's Creek, Florida Posts: 1,311 View My Garage	Ya thats what I though also, it says "plug and play" all over the website. I called them and got a lady that spoke barely any English that couldn't help me then I emailed them and he recommended this harness. After ordering and receiving that I found out it was just an extension for the stock wiring. So this was my last resort, to see if anyone on here had any past experience with their kits.

10-08-2010, 07:06 PM	#9
ZaBeast07 Mid-Florida Camaro Club Drives: IPF SC'd 2010 LLT 2015 1SS/RS Join Date: Sep 2010 Location: Hunter's Creek, Florida Posts: 1,311 View My Garage	I went over to the Advanced Autoparts and Autozone and neither store had anything close let alone a connector kit for the 2010s. Where did u get that picture at? was that off a website selling the connector kit?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How-To: Install BFxenon HID Headlights (Non-RS)	BFxenon.com	Camaro DIY & HOW-TO instructions & discussions	73	10-07-2016 03:03 PM
DIY - Install BFxenon HID Fog Light kit - RS and non-RS package	BFxenon.com	Camaro DIY & HOW-TO instructions & discussions	46	04-25-2011 12:04 PM
New Vendor Flashtech Lifetime warranty HID kits! Free shipping in july!	steve@flashtech	Exterior Parts & Accessories	48	10-08-2010 05:56 PM
5202 (H16 ; 9009) Slim HID Kits !!! 09-Up Camaro Fog Light HID kits !!!	HID_Guy	Exterior Parts & Accessories	19	09-08-2009 02:07 AM
2010 Camaro Fog/DRL Light 5202 HID kits ....	HID_Guy	Exterior Parts & Accessories	1	09-07-2009 01:19 PM