Forced Induction "PCV" questions!!! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

wdixon17 · 07-31-2013, 09:09 PM

Ok guys I have a 2010 camaro ss 6 speed manual. Ive been researching for a week and cant seem to find a definant answer/solution. Im building a rear mount turbo system and I need to know the best way to relieve crankcase pressure. I was told by G Force Motorsports to run breathers but didnt specify where to place the breathers, like onto which pcv lines. Completely confused on which setup to use and how to install any of them. Pics, thread links and walkthrough directions are all welcome. Thanks guys

wakespeak · 08-01-2013, 09:01 AM

1LE PCV oil separator might be a good place to start. One guy was blowing seals until he used it. Can't recall if he had FI or not.

07-31-2013, 09:09 PM	#1
wdixon17 Drives: 2010 Camaro SS Join Date: Mar 2013 Location: Alvin, Tx Posts: 7	Forced Induction "PCV" questions!!! Ok guys I have a 2010 camaro ss 6 speed manual. Ive been researching for a week and cant seem to find a definant answer/solution. Im building a rear mount turbo system and I need to know the best way to relieve crankcase pressure. I was told by G Force Motorsports to run breathers but didnt specify where to place the breathers, like onto which pcv lines. Completely confused on which setup to use and how to install any of them. Pics, thread links and walkthrough directions are all welcome. Thanks guys

08-01-2013, 09:01 AM	#2
wakespeak Drives: 2020 ZL1 1LE Join Date: Sep 2012 Location: Austin, Texas Posts: 1,420	1LE PCV oil separator might be a good place to start. One guy was blowing seals until he used it. Can't recall if he had FI or not.