You are browsing camaro5 
 |
|
01-10-2014, 07:38 PM
|
#1 |
|
Drive Fast Take Chances
|
Drag Radial Stock Wheels
what drag radial can i run on stock 8" wheels
__________________
2012 45th Ls3 M6:ECS 1500, Custom Cam ,Alky Meth kit, Mcleod Rxt, MGW shifter,Pfadt Tri-y headers Solo Mach X, 20%tint,3.91 gears ,Suspension upgrades, G-force axles.700 RWHP
http://www.slowhawkperformance.com/  |
|
|
|
01-10-2014, 09:27 PM
|
#2 |
          
|
The stock front wheels are 8", but the rears are 9". The Nitto 555R (275/40R20) will fit "properly" on the 9" wheel…..but not on the 8" wheel.
|
|
|
|
|
01-10-2014, 09:41 PM
|
#3 |
|
Drive Fast Take Chances
|
I have two spare 8" not 9" So there's no DR I can use? For a 8"rim
__________________
2012 45th Ls3 M6:ECS 1500, Custom Cam ,Alky Meth kit, Mcleod Rxt, MGW shifter,Pfadt Tri-y headers Solo Mach X, 20%tint,3.91 gears ,Suspension upgrades, G-force axles.700 RWHP
http://www.slowhawkperformance.com/ |
|
|
|
|
01-10-2014, 09:55 PM
|
#4 |
|
|
Oh, I'm sure you could probably "squeeze" that 275/40R20 on an 8" wheel. I've seen quite a few people squeeze a 315/35 on a 9" wheel, so I'm sure it would physically fit. But as far as "properly" fit, no there is NOT a 20" DR available to fit on a 8" wheel. FYI….according to Nitto, the 555R (275/40R20) is designed for a 9.0" to 11.0 wheel.
|
|
|
|
|
|
|
|
 |
|
|
