You are browsing camaro5 
 |
|
12-20-2013, 01:19 PM
|
#1 |
  
Drives: Camaro SS/RS inferno red interior Join Date: Mar 2012
Location: Pompano Beach FL
Posts: 817
|
2012 Stock SS sway bars and front endlinks
Looking to get $100 both front endlinks and front/back sway bars! You pay shipping! I am also open for requests so dont be shy and GIVE ME YOUR BEST OFFER!
__________________
SoFlo Muscle Car Group
Miami/Broward Last edited by 954camaro; 12-20-2013 at 04:46 PM. |
|
|
|
01-10-2014, 05:23 PM
|
#2 |
|
Drives: Camaro SS/RS inferno red interior Join Date: Mar 2012
Location: Pompano Beach FL
Posts: 817
|
This is the FE4 sways bars and endlinks so they will only fit on the 2012+ camaro however if you upgrade something's to you 2010,2011 then you will be able to use them
__________________
SoFlo Muscle Car Group
Miami/Broward |
|
|
|
|
01-17-2014, 03:25 PM
|
#3 |
|
Drives: Camaro SS/RS inferno red interior Join Date: Mar 2012
Location: Pompano Beach FL
Posts: 817
|
Bump
__________________
SoFlo Muscle Car Group
Miami/Broward |
|
|
|
|
01-22-2014, 07:33 PM
|
#4 |
|
Drives: Camaro SS/RS inferno red interior Join Date: Mar 2012
Location: Pompano Beach FL
Posts: 817
|
Bump
__________________
SoFlo Muscle Car Group
Miami/Broward |
|
|
|
|
01-22-2014, 08:02 PM
|
#5 |
|
Older Than Dirt
Drives: 2010 & 2013 Camaros Join Date: Apr 2010
Location: Aiken, SC
Posts: 4,684
|
You would need 2 of the 2012-up rear lower control arms and the 2012-up rear links to upgrade a 2010/2011 with the rear bar.
And although I've only read about it since I actually haven't done the conversion, the mounting point holes on the front for the links may need a bit of enlarging for the stud to fit through.
__________________
2010 2SS TE, 1 of 822/2013 Camaro ZL1 vert, 1 of 54
 |
|
|
|
|
|
|
|
 |
|
|
