First time at track - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

sporto20 · 01-26-2014, 09:38 PM

This was my first time ever at a drag strip. I have lots of room for improvement, but I had fun and can't wait to get back out there!!

BPG · 01-26-2014, 10:01 PM

You hit the rev limiter a few times? I would expect your trap speed be higher with that kind of power. Good run either way

2011shelby · 01-26-2014, 10:16 PM

Not bad for first time.
As long as you had fun and didn't break anything it was a good night.

SamHouseIII · 01-26-2014, 10:47 PM

Better than my first time, Congrats!

Andrew4180 · 01-26-2014, 11:17 PM

nice!

Stephen12ZL1 · 01-27-2014, 09:47 AM

drag radials?

sporto20 · 01-27-2014, 11:41 AM

Street radial II MTs 305/35/20. They hooked up pretty well. The issue is really just my inexperience. I hope to get into the mid-10s with my mods with more practice!

01-26-2014, 09:38 PM	#1
sporto20 Drives: 1. 2010 2SS (sold) 2. 2013 ZL1 M6 Join Date: Aug 2012 Location: TX Posts: 90 View My Garage	First time at track This was my first time ever at a drag strip. I have lots of room for improvement, but I had fun and can't wait to get back out there!! Attached Images __________________ 710 RWHP; 667 torque Ported Supercharger, Snout and TB Rotofab CAI Kooks 1 7/8” Headers w/ high flow Cats LPE GT9 Cam, BTR Springs and Comp Pushrods 160 degree thermostat 2.55" Upper/9.1" Lower SC pulley w/ balancer LPE solid isolator, ID850 Injectors LPE heat exchanger w/ fans Centerforce Dual Friction Clutch Custom Tune

01-26-2014, 10:01 PM	#2
BPG Faster than you... Drives: 1194whp. 8.62@168. daily driver... Join Date: Nov 2013 Location: USA Posts: 430	You hit the rev limiter a few times? I would expect your trap speed be higher with that kind of power. Good run either way __________________ GTR

01-26-2014, 10:47 PM	#4
SamHouseIII I Carry! Drives: 2013 CRT ZL1 Join Date: Jul 2011 Location: Fletcher, Ok Posts: 2,722	Better than my first time, Congrats! __________________ I am a Modaholic!! Please Help!! Do Not feed my addicition....See build... http://www.camaro5.com/forums/showthread.php?t=261540 From Oklahoma, Join us on Facebook https://www.facebook.com/groups/okcamaros/

01-27-2014, 09:47 AM	#6
Stephen12ZL1 Drives: '21 ZLE A10 Join Date: May 2012 Location: Mechanicsville, VA Posts: 6,824	drag radials? __________________ '21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60' '17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold)

01-27-2014, 11:41 AM	#7
sporto20 Drives: 1. 2010 2SS (sold) 2. 2013 ZL1 M6 Join Date: Aug 2012 Location: TX Posts: 90 View My Garage	Street radial II MTs 305/35/20. They hooked up pretty well. The issue is really just my inexperience. I hope to get into the mid-10s with my mods with more practice! __________________ 710 RWHP; 667 torque Ported Supercharger, Snout and TB Rotofab CAI Kooks 1 7/8” Headers w/ high flow Cats LPE GT9 Cam, BTR Springs and Comp Pushrods 160 degree thermostat 2.55" Upper/9.1" Lower SC pulley w/ balancer LPE solid isolator, ID850 Injectors LPE heat exchanger w/ fans Centerforce Dual Friction Clutch Custom Tune

01-26-2014, 10:16 PM	#3
2011shelby Drives: 2011ShelbyGT500 Join Date: Jan 2014 Location: Louisiana Posts: 293	Not bad for first time. As long as you had fun and didn't break anything it was a good night.

01-26-2014, 11:17 PM	#5
Andrew4180 Bigfoot Drives: "Doomsday" 1981 Camaro Join Date: Jan 2014 Location: Joplin, MO Posts: 417 View My Garage	nice!