Affordable Catback Exhaust Install Locations? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

fab410 · 03-13-2014, 03:14 PM

I have an SW 3" Retro Chambered cat-back exhaust I need installed tomorrow. I was looking for reputable locations that arent overpriced. I would normally go to T&T but he will be out of town so I was looking for the next best option.

Thanks

bhillakaiceberg · 03-13-2014, 03:34 PM

http://www.automufflers.org/

Over in Hyattsville. I know a cpl folks who have used them and have had a good experience.

Dynamite · 03-13-2014, 05:12 PM

Quote:

Originally Posted by bhillakaiceberg

http://www.automufflers.org/

Over in Hyattsville. I know a cpl folks who have used them and have had a good experience.

I went there with my 2LT over a year ago.

Once to install my SLP loudmouth axleback and then again a few months later to put the stock mufflers on, because I was planning to trade up.

They charged my two different prices. $75 and $130 for essentially the same job and the welding job was pretty sloppy.

I only accepted the second time because I just wanted the job to be done and to move on.

I wouldn't go back.

fab410 · 03-13-2014, 05:19 PM

Thanks man, I called and they actually quoted me $175-$300 ...NEGATIVE. I had a Catback exhaust swapped from my previous Camaro to my current Camaro and vise versa all for $75 in PA. They charged exactly how long it took to do the job. Tim at T&T's price is about the same but unfortunately he's not available tomorrow.

Thanks though, still searching (bump)

bhillakaiceberg · 03-13-2014, 05:37 PM

Damn. No worries. Hope you find something bro.

fab410 · 03-13-2014, 08:13 PM

No problem, bump

Frans96ss · 03-13-2014, 08:48 PM

we can get it done for you.

fastlane2010 · 03-13-2014, 08:52 PM

ill do it for 100 I work at Hoffman chevy caddy in Hagerstown ,md just swing on by and cat back is easy install is there any welding or is it just a swap

fab410 · 03-13-2014, 09:07 PM

@fastlane just a swap, unbolt and bolt up

MarylandSpeed · 03-13-2014, 10:11 PM

We charge like $100..but you need to book more than a day in advance.

fab410 · 03-13-2014, 10:20 PM

@Maryland speed, thanks guys...i actually purchased the exhaust from you guys but was told there wouldn't be anything available until the end of March which is too far out.

03-13-2014, 03:14 PM	#1
fab410 @fabSSbuild on IG Drives: 2012 Twin Turbo Super Sport Join Date: Aug 2011 Location: Arlington, VA Posts: 866 View My Garage	Affordable Catback Exhaust Install Locations? I have an SW 3" Retro Chambered cat-back exhaust I need installed tomorrow. I was looking for reputable locations that arent overpriced. I would normally go to T&T but he will be out of town so I was looking for the next best option. Thanks __________________ AGP Twin Turbo, FAST lsxR manifold, ID850's, Squash Return Style Fuel System, ZL1 Bumper/Side Skirts/Hood/Carbon Insert, Havoc Rear Diffuser, PFADT Coilovers/Sway Bars/Adj. Tie Rods/Solid Subframe Bushings/Trailing Arms, Eboost2, SW Retro Chambered 3" Catback, R1 Concept Drilled/Slotted Rotors, 360 Forged Straight 5's, Matte Metallic Purple Wrap, Anvil Carbon Spoiler, Full AAC Lighting, etc

03-13-2014, 03:34 PM	#2
bhillakaiceberg Drives: 2011 2SS/RS & 2017 1SS Join Date: Apr 2011 Location: Maryland Posts: 1,960	http://www.automufflers.org/ Over in Hyattsville. I know a cpl folks who have used them and have had a good experience. __________________ *2011 Chevrolet Camaro 2SS/RS L99* (1 of 782) 10.78 @125mph ALL MOTOR SBE Built/Tuned by Me 2017 Chevrolet Camaro 1SS Auto 9.29 @144.57mph ALL MOTOR SBE #TEAMGPI Gwatney Performance Innovation

03-13-2014, 05:19 PM	#4
fab410 @fabSSbuild on IG Drives: 2012 Twin Turbo Super Sport Join Date: Aug 2011 Location: Arlington, VA Posts: 866 View My Garage	Affordable Catback Exhaust Install Locations? Thanks man, I called and they actually quoted me $175-$300 ...NEGATIVE. I had a Catback exhaust swapped from my previous Camaro to my current Camaro and vise versa all for $75 in PA. They charged exactly how long it took to do the job. Tim at T&T's price is about the same but unfortunately he's not available tomorrow. Thanks though, still searching (bump) __________________ AGP Twin Turbo, FAST lsxR manifold, ID850's, Squash Return Style Fuel System, ZL1 Bumper/Side Skirts/Hood/Carbon Insert, Havoc Rear Diffuser, PFADT Coilovers/Sway Bars/Adj. Tie Rods/Solid Subframe Bushings/Trailing Arms, Eboost2, SW Retro Chambered 3" Catback, R1 Concept Drilled/Slotted Rotors, 360 Forged Straight 5's, Matte Metallic Purple Wrap, Anvil Carbon Spoiler, Full AAC Lighting, etc Last edited by fab410; 03-13-2014 at 09:06 PM.

03-13-2014, 05:37 PM	#5
bhillakaiceberg Drives: 2011 2SS/RS & 2017 1SS Join Date: Apr 2011 Location: Maryland Posts: 1,960	Damn. No worries. Hope you find something bro. __________________ *2011 Chevrolet Camaro 2SS/RS L99* (1 of 782) 10.78 @125mph ALL MOTOR SBE Built/Tuned by Me 2017 Chevrolet Camaro 1SS Auto 9.29 @144.57mph ALL MOTOR SBE #TEAMGPI Gwatney Performance Innovation

03-13-2014, 08:13 PM	#6
fab410 @fabSSbuild on IG Drives: 2012 Twin Turbo Super Sport Join Date: Aug 2011 Location: Arlington, VA Posts: 866 View My Garage	No problem, bump __________________ AGP Twin Turbo, FAST lsxR manifold, ID850's, Squash Return Style Fuel System, ZL1 Bumper/Side Skirts/Hood/Carbon Insert, Havoc Rear Diffuser, PFADT Coilovers/Sway Bars/Adj. Tie Rods/Solid Subframe Bushings/Trailing Arms, Eboost2, SW Retro Chambered 3" Catback, R1 Concept Drilled/Slotted Rotors, 360 Forged Straight 5's, Matte Metallic Purple Wrap, Anvil Carbon Spoiler, Full AAC Lighting, etc

03-13-2014, 08:48 PM	#7
Frans96ss Drives: 96SS Join Date: May 2009 Location: New Castle Delaware Posts: 1,946	we can get it done for you.

03-13-2014, 08:52 PM	#8
fastlane2010 Drives: 2010 camaro with fast lane stage 2 Join Date: Apr 2011 Location: hagerstown Posts: 705	ill do it for 100 I work at Hoffman chevy caddy in Hagerstown ,md just swing on by and cat back is easy install is there any welding or is it just a swap __________________ 12.4 in 1/4 at 117mph first time custom 2tone paint fastlane stage 2 hydroformed carbon fiber cowl and cluster kooks headers and 3" xpipe with pypes axle back

03-13-2014, 09:07 PM	#9
fab410 @fabSSbuild on IG Drives: 2012 Twin Turbo Super Sport Join Date: Aug 2011 Location: Arlington, VA Posts: 866 View My Garage	@fastlane just a swap, unbolt and bolt up __________________ AGP Twin Turbo, FAST lsxR manifold, ID850's, Squash Return Style Fuel System, ZL1 Bumper/Side Skirts/Hood/Carbon Insert, Havoc Rear Diffuser, PFADT Coilovers/Sway Bars/Adj. Tie Rods/Solid Subframe Bushings/Trailing Arms, Eboost2, SW Retro Chambered 3" Catback, R1 Concept Drilled/Slotted Rotors, 360 Forged Straight 5's, Matte Metallic Purple Wrap, Anvil Carbon Spoiler, Full AAC Lighting, etc

03-13-2014, 10:11 PM	#10
MarylandSpeed Account Suspended Drives: 2012 ZL1 & 2010 2SS/RS Join Date: Jul 2009 Location: Maryland Posts: 3,378	We charge like $100..but you need to book more than a day in advance.

03-13-2014, 10:20 PM	#11
fab410 @fabSSbuild on IG Drives: 2012 Twin Turbo Super Sport Join Date: Aug 2011 Location: Arlington, VA Posts: 866 View My Garage	@Maryland speed, thanks guys...i actually purchased the exhaust from you guys but was told there wouldn't be anything available until the end of March which is too far out. __________________ AGP Twin Turbo, FAST lsxR manifold, ID850's, Squash Return Style Fuel System, ZL1 Bumper/Side Skirts/Hood/Carbon Insert, Havoc Rear Diffuser, PFADT Coilovers/Sway Bars/Adj. Tie Rods/Solid Subframe Bushings/Trailing Arms, Eboost2, SW Retro Chambered 3" Catback, R1 Concept Drilled/Slotted Rotors, 360 Forged Straight 5's, Matte Metallic Purple Wrap, Anvil Carbon Spoiler, Full AAC Lighting, etc