Prepped LQ9 Bare Blocks, 4.00 and 4.010. Diamond Forged Pistons. - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

wrp · 03-27-2014, 11:02 PM

I have two prepped LQ9 Blocks. They have new cam bearings, they have been decked and the alignment checked. Bother are honed for Moly Rings and are ready to build. I have a set of Diamond -28 cc dished pistons to fit the 4.010 bore. These pistons were custom built for TSP.

4.010 Block - This block came out of a 1145 + rwhp build. It came new from Texas speed about 5 years ago. It has less than 4000 miles on it since I have owned it. The block has been prepped and has ARP studs. I am asking $600 plus shipping for it

Diamond Pistons - custom built for TSP. -28cc Dished, Diamon number 807TS asking $400 plus shipping

LQ9 4.00 inch bore bare block. Fully prepped new bearings honed for Moly Rings, Deck is flat and the alignment checked. Ready to build $600 plus shipping

K1SSRSS · 03-28-2014, 04:38 PM

Interested in one of the blocks, can you let me know the price on shipping to 88047.

Edit, where in TX are you located?

wrp · 03-28-2014, 06:02 PM

I'll get a quote, I am in Plano. It will be tomorrow before I can get the quote. Sold!!!

03-27-2014, 11:02 PM	#1
wrp Drives: 2004 QSM GTO Join Date: Sep 2010 Location: Texas Posts: 20	Prepped LQ9 Bare Blocks, 4.00 and 4.010. Diamond Forged Pistons. I have two prepped LQ9 Blocks. They have new cam bearings, they have been decked and the alignment checked. Bother are honed for Moly Rings and are ready to build. I have a set of Diamond -28 cc dished pistons to fit the 4.010 bore. These pistons were custom built for TSP. 4.010 Block - This block came out of a 1145 + rwhp build. It came new from Texas speed about 5 years ago. It has less than 4000 miles on it since I have owned it. The block has been prepped and has ARP studs. I am asking $600 plus shipping for it Diamond Pistons - custom built for TSP. -28cc Dished, Diamon number 807TS asking $400 plus shipping LQ9 4.00 inch bore bare block. Fully prepped new bearings honed for Moly Rings, Deck is flat and the alignment checked. Ready to build $600 plus shipping

03-28-2014, 04:38 PM	#2
K1SSRSS Chief Many Camaros Drives: A paid off Camaro!!! Join Date: Mar 2009 Location: Las Cruces, NM Posts: 1,863 View My Garage	Interested in one of the blocks, can you let me know the price on shipping to 88047. Edit, where in TX are you located? __________________ 504hp/478tq Performance: Kooks LT, 3'' Exhaust, V-Max TB, Roto-Fab CAI, Custom Ported/Port Matched Heads and Intake Suspension: BMR Adjustable LCA's, BMR Trailing Arms, Poly Bushings, BMR Toe Rods Coming Soon (still in the box): Procharger F1R, G-Force Axles, 3:91 gears w/Eaton Truetrac

03-28-2014, 06:02 PM	#3
wrp Drives: 2004 QSM GTO Join Date: Sep 2010 Location: Texas Posts: 20	I'll get a quote, I am in Plano. It will be tomorrow before I can get the quote. Sold!!! Last edited by wrp; 05-11-2014 at 12:56 PM.