![]() |
|
|
#1 |
|
Account Suspended
Drives: 2014 1SS/RS M6 Join Date: Feb 2014
Location: California
Posts: 365
|
Transmission issues
My Camaro is a week old, it is an SS with the manual transmission. Since I got the car, I have noticed this whining clanking noise coming from the transmission. It seems that this noise is coming from the dash but you can actually feel it vibrating the shifter. It sounds like metal striking something, or something is loose. It also gets louder as you accelerate in 1st and 2nd gear, you can hear it in all gears however it is the worst in first and second. I also feel that the car is underpowered, that might be because the engine is not broken in, and the fuse pull has not been performed. Has anybody had any issues like this? I fear that when my dealer did a dealer trade for this car, they let a 19 year old employee transfer it, and he might have not known how to drive stick and messed something up...
|
|
|
|
|
|
#2 |
|
145lb Powerlifter
Drives: 2013 Camaro 2SS RS LS3 Join Date: Jan 2014
Location: Conshohocken, PA
Posts: 1,146
|
Does it sound like a little rattle when shifting gears? My car's always had that, probably things just shifting a bit on the stock rubber tranny mounts. You can try switching to poly mounts to see if it tightens up the drivetrain slack. These are heavy cars, so there is going to be some drivetrain noise due to the heavy trannies rattling against the stock mushy mounts.
If I go super easy on the clutch to make the shifts buttery smooth, there won't be any of the rattling, but if I drive normally - and my normal driving does not result in perfectly crisp shifts to say the least, especially with this picky, tricky, long clutch - there is some light but noticeable rattle. The funny thing is if I really wind out the gears with more throttle, the TR6060 shifts the smoothest of all. Shifting at 2,500 rpms results in the roughest shifts! |
|
|
|
|
|
#3 | |
|
Account Suspended
Drives: 2014 1SS/RS M6 Join Date: Feb 2014
Location: California
Posts: 365
|
Quote:
|
|
|
|
|
|
|
#4 | |
![]() ![]() ![]() Drives: 2014 camaro ss ,1967 chevelle ss, Join Date: Sep 2013
Location: loganville
Posts: 1,209
|
Quote:
__________________
|
|
|
|
|
|
|
#5 |
|
Account Suspended
Drives: 2014 1SS/RS M6 Join Date: Feb 2014
Location: California
Posts: 365
|
|
|
|
|
|
|
#6 |
![]() Drives: 2016 2SS, Summit White, A8, NPP Join Date: Apr 2013
Location: Arkansas
Posts: 717
|
Take it to the dealer.
|
|
|
|
|
|
#7 | |
|
Buckeye
Drives: 2013 2SS RS 1LE Join Date: Apr 2012
Location: Tucson
Posts: 272
|
Quote:
__________________
|
|
|
|
|
|
|
#8 |
![]() ![]() |
I would think this is not normal. I have never had any noise out of mine. Same trans as yours. Looks like you will be taking it back to the dealer.
__________________
There's more to life than gas mileage
LS3, Whipple, Custom Comp Cam, springs, pushrods, timing set, CAI intake, Apex cold air scoop, Doug Thorley TRI-Y headers, Billet Custom Products baffled Valve covers, Mighty Mouse Catch can, ADM FPCM, ZL1 fuel pump, MSD boost-a-pump, Hex Vent hood vents, ProSport gauges(fuel pressure, AFR, Boost), Corsa, 100 cell Cats. Jannetty remote tuned, Pfadt trailing arms, all parts user installed. No Dyno yet. Manual trans. 3.45 gears. |
|
|
|
|
|
#9 |
|
Account Suspended
Drives: 2014 1SS/RS M6 Join Date: Feb 2014
Location: California
Posts: 365
|
The transmission crossmember bolts seem to have flat edges and various chips in them. Why would this be on a brand new car?
|
|
|
|
|
|
#10 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: GM Vehicles Join Date: Jun 2010
Location: Michigan
Posts: 9,327
|
Quote:
Sincere apologies to read of your transmission concerns. I understand that you're seeking thoughts and opinions, but send me a message if you want to take it a step further and get an official diagnosis. I will then reach out to a Customer Experience Manager at your desired dealer for additional assistance in these matters. If not, feel free to PM me your VIN so I may check my resources for any related field actions. Sincerely, William R. Chevrolet Customer Care |
|
|
|
|
|
|
#11 |
![]() Drives: 2014 Camaro 1SS Join Date: Apr 2014
Location: Reno , Nv
Posts: 19
|
3Black, i just picked my car up 2 weeks ago and i have the same issue with the noise from shifter. did you get the problem resolved? just wondering what the issue was since i'll be bringing my car in.
|
|
|
|
|
|
#12 |
|
Account Suspended
Drives: 2014 1SS/RS M6 Join Date: Feb 2014
Location: California
Posts: 365
|
I took it in, they said it was normal and they drove other Camaros and supposedly they also made the same noise. They were hesitant to drive me in them so now I'm planning to go to a different dealer. Keep me posted if they find the issue in your car.
|
|
|
|
|
|
#13 |
![]() Drives: 2014 Camaro 1SS Join Date: Apr 2014
Location: Reno , Nv
Posts: 19
|
just returned from dealership gave me the same exact answer you were given. They say it's normal for that car.
|
|
|
|
|
|
#14 |
![]() |
I would ask to drive a different Camaro on the lot that has the same power train to see if that one makes the same noise you are referring to. If it doesn't then ask them why yours does.
|
|
|
|
|
|
|
|
![]() |
|
|