2014 SS Front Grill Issue - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Xeno13 · 05-27-2014, 07:43 PM

Hey guys,

New to the forum and a new Camaro owner - I just purchase a 2014 SS 2SS 1LE (AGM) and I was washing my car and notices that a piece of plastic at the bottom of the lower intake grill (drivers side - inside) was installed a little crooked (see images attached) - the passangers side is perfect. The plastic piece is raised up a little bit, not flush with the bottom lip as it looks like it should be

It is a little nit picking thing and I went to the dealer to inquire about it getting fixed or adjusted and I looked at a another 2014 SS there on the lot and it was exactly the same - kinda weird. I was wondering if any other 2014 Camaro SS owners noticed the same thing?

wayne watson · 05-27-2014, 07:46 PM

what image?

Xeno13 · 05-27-2014, 07:49 PM

I am trying to load it

wayne watson · 05-27-2014, 08:14 PM

ok, i had to go see and yes mine is too. it kind of looks like it buckled a little bit after everything was secured, nothing i can do without possibly messing something up. always little thing on all cars

Misfit · 05-31-2014, 10:41 PM

Add a race scoop, you'll have to cut out the messed up part. Problem solved, problem staying solved.

Stoned Hemi 6 · 06-01-2014, 11:24 PM

Mine is doing this too...

Darwood · 07-13-2014, 04:17 PM

I just notice this on mine. Both sides. It's weird. Any ideas as to why it does this? It doesn't look like it was engineered to do this but I don't see what is supposed to keep it from doing this.

05-27-2014, 07:43 PM	#1
Xeno13 Drives: 2018 ZL1 1LE / Nightfall Grey Join Date: Apr 2013 Location: Montana Posts: 114	2014 SS Front Grill Issue Hey guys, New to the forum and a new Camaro owner - I just purchase a 2014 SS 2SS 1LE (AGM) and I was washing my car and notices that a piece of plastic at the bottom of the lower intake grill (drivers side - inside) was installed a little crooked (see images attached) - the passangers side is perfect. The plastic piece is raised up a little bit, not flush with the bottom lip as it looks like it should be It is a little nit picking thing and I went to the dealer to inquire about it getting fixed or adjusted and I looked at a another 2014 SS there on the lot and it was exactly the same - kinda weird. I was wondering if any other 2014 Camaro SS owners noticed the same thing? Attached Images Last edited by Xeno13; 05-27-2014 at 07:54 PM. Reason: images

05-27-2014, 07:46 PM	#2
wayne watson Drives: 2014 camaro ss ,1967 chevelle ss, Join Date: Sep 2013 Location: loganville Posts: 1,209 View My Garage	what image? __________________

05-27-2014, 08:14 PM	#4
wayne watson Drives: 2014 camaro ss ,1967 chevelle ss, Join Date: Sep 2013 Location: loganville Posts: 1,209 View My Garage	ok, i had to go see and yes mine is too. it kind of looks like it buckled a little bit after everything was secured, nothing i can do without possibly messing something up. always little thing on all cars __________________

05-31-2014, 10:41 PM	#5
Misfit Jumpmaster Drives: 2014 Camaro SS LS3 Join Date: Sep 2013 Location: North Carolina Posts: 56	Add a race scoop, you'll have to cut out the messed up part. Problem solved, problem staying solved. __________________ Danny 2014 1SS Ordered 18 SEP 13 Delivered 25 OCT 13 Picked up 30 OCT 13 CAI Intake, VMAX Ported Throttle Body, Apex Motorsports Catch Can, Apex Intake Scoop/Washer Bottle Relocate, Skip Shift Eliminator, Stainless Works 2" Headers, High Flow Cats, Retro Catback Exhaust, JRE Tune...more to follow 12.6087 1/4 ET @ 113.98MPH on stock tires.

05-27-2014, 07:49 PM	#3
Xeno13 Drives: 2018 ZL1 1LE / Nightfall Grey Join Date: Apr 2013 Location: Montana Posts: 114	I am trying to load it

06-01-2014, 11:24 PM	#6
Stoned Hemi 6 Drives: '14 2SS/RS AGM 1LE NPP, 1995 Imp SS Join Date: Sep 2010 Location: Crestview FL Posts: 130	Mine is doing this too...

07-13-2014, 04:17 PM	#7
Darwood Drives: 2014 2SS 1LE Join Date: Mar 2014 Location: Tejas Posts: 187	I just notice this on mine. Both sides. It's weird. Any ideas as to why it does this? It doesn't look like it was engineered to do this but I don't see what is supposed to keep it from doing this.