TiAL Q BOV - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Slickcas · 06-22-2014, 02:20 PM

I have a new TiAL Q BOV with the -2 PSI spring for a Supercharger. Blue body with AL flange that can be welded on.

Does sound very cool but not the sound I am looking for. I put it on the car started it drove down the street and back then pulled it off.
Thought about keeping it for a 4.8 turbo build I am slowly working on but leaning against it as it will probably be a sleeper set up.

I also have an NYPPD Billet Aluminium Adapter Flange: BOV Greddy to Tial / 50mm Blow off Valve. So that you can bolt this up to the standard Vortech/Paxton etc. set up.

This is a good opportunity to change out your std. BOV to the Tial Q.

$225 shipped to lower 48

DarkCry956 · 06-25-2014, 12:05 PM

PM sent

Slickcas · 06-26-2014, 03:48 PM

Still looking for a Vortech Maxflow that comes with the Vortech kits. Also have the TiAL.

ZuluKilla8 · 06-26-2014, 09:27 PM

Hey man, I have the stock BPV that comes with the Vortech V3 kit, not sure if its the maxflow or not, ill see what it says on the side tomorrow and let you know, if you want it just let me know.

Slickcas · 06-28-2014, 06:33 PM

The Tial q was $259.99. Will ship it to lower 48 for $225. Not a scratch on it.

Slickcas · 07-10-2014, 03:46 PM

Bump.

Slickcas · 07-22-2014, 08:21 PM

$225 shipped to lower48.

Slickcas · 08-03-2014, 01:47 PM

All boxed up!

sanchez1818 · 08-23-2014, 11:53 AM

Pmd

06-22-2014, 02:20 PM	#1
Slickcas Drives: 12' 2SS/RS LS3 IBM Join Date: Nov 2011 Location: Odin. ILL Posts: 487 View My Garage	TiAL Q BOV I have a new TiAL Q BOV with the -2 PSI spring for a Supercharger. Blue body with AL flange that can be welded on. Does sound very cool but not the sound I am looking for. I put it on the car started it drove down the street and back then pulled it off. Thought about keeping it for a 4.8 turbo build I am slowly working on but leaning against it as it will probably be a sleeper set up. I also have an NYPPD Billet Aluminium Adapter Flange: BOV Greddy to Tial / 50mm Blow off Valve. So that you can bolt this up to the standard Vortech/Paxton etc. set up. This is a good opportunity to change out your std. BOV to the Tial Q. $225 shipped to lower 48 Attached Images Last edited by Slickcas; 07-10-2014 at 03:48 PM.

06-26-2014, 09:27 PM	#4
ZuluKilla8 Drives: 2010 Camaro 1SS/RS RJT Join Date: Jan 2010 Location: NJ Posts: 831	Hey man, I have the stock BPV that comes with the Vortech V3 kit, not sure if its the maxflow or not, ill see what it says on the side tomorrow and let you know, if you want it just let me know. __________________ 2010 Camaro SS LS3 Holley Hi-Ram Manifold,Custom grind boost cam,Vortech V-3,10Rib 3.47 Pully Airfilter Pipe Delete, 10 PSI, TSP LT Headers, Flowmaster Outlaws, Alky Control Meth Kit, PFADT 1.25, ZL1 Fuel Pump, DSS 1000HP axles, Mantic ER2 Clutch, Full BMR rear suspension drag pack upgrade. C6 Vette 18 rims with M/T 305 out back. COPO Hood Race Proven Motorsports tuned

06-25-2014, 12:05 PM	#2
DarkCry956 Drives: 2011 Camaro 2SS/RS Join Date: Oct 2011 Location: Texas RGV Posts: 794	PM sent

06-26-2014, 03:48 PM	#3
Slickcas Drives: 12' 2SS/RS LS3 IBM Join Date: Nov 2011 Location: Odin. ILL Posts: 487 View My Garage	Still looking for a Vortech Maxflow that comes with the Vortech kits. Also have the TiAL.

06-28-2014, 06:33 PM	#5
Slickcas Drives: 12' 2SS/RS LS3 IBM Join Date: Nov 2011 Location: Odin. ILL Posts: 487 View My Garage	The Tial q was $259.99. Will ship it to lower 48 for $225. Not a scratch on it.

07-10-2014, 03:46 PM	#6
Slickcas Drives: 12' 2SS/RS LS3 IBM Join Date: Nov 2011 Location: Odin. ILL Posts: 487 View My Garage	Bump.

07-22-2014, 08:21 PM	#7
Slickcas Drives: 12' 2SS/RS LS3 IBM Join Date: Nov 2011 Location: Odin. ILL Posts: 487 View My Garage	$225 shipped to lower48.

08-03-2014, 01:47 PM	#8
Slickcas Drives: 12' 2SS/RS LS3 IBM Join Date: Nov 2011 Location: Odin. ILL Posts: 487 View My Garage	All boxed up!

08-23-2014, 11:53 AM	#9
sanchez1818 Drives: 2012 Camaro SS Join Date: Jan 2012 Location: SOCAL Posts: 44	Pmd