Catch Can - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

rcwest · 10-22-2014, 02:03 PM

Since there are so many options I was just wondering which catch can everyone recommends?

Warpaint69 · 10-22-2014, 02:07 PM

You can't go wrong with Elite Engineering or Apex's. There are some other catch can's on the market that I have no experience with so I'll let others chime in on those.

Pluto · 10-22-2014, 02:38 PM

Quote:

Originally Posted by Warpaint69

You can't go wrong with Elite Engineering or Apex's. There are some other catch can's on the market that I have no experience with so I'll let others chime in on those.

yup might as well do flip a coin and make a purchase

JDP Sales · 10-22-2014, 04:23 PM

Elite Engineering. They've been doing it for a long time and manufacture very high quality products. Let me know if I can answer any questions for you.

Best regards,

Tyler
888-308-6007

pickwithaustin · 10-22-2014, 04:31 PM

Everyone will recommend the one that they are using, as they/we always do when we respond to this question on here.

Apex Motorsports · 10-22-2014, 05:40 PM

Quote:

Originally Posted by rcwest

Since there are so many options I was just wondering which catch can everyone recommends?

These kinds of threads tend to turn into a survey of what the members online at any particular moment have on there car with very little substance about what is at the heart of the questions. Check out the thread below. I wrote it and others like it to help members make informed decisions about what parts to use on their car. Give it a look and if you have any questions don't hesitate to ask.

The "Catch Can" Explained!

Kelly@PCMofNC · 10-23-2014, 09:02 AM

Quote:

Originally Posted by rcwest

Since there are so many options I was just wondering which catch can everyone recommends?

We have been selling and installing a lot of our cans lately, we are very happy with the results. We put a lot of time and effort into the design, fit and finish. Our brackets are LS-specific and powdercoated black for a clean finish. No pipe threads or brass fittings; all of our fittings are high quality black Fragola AN -6 pushlock - which means no hose clamps either. Our filter media is non-metallic, it will never rust or potentially send debris through your engine. Goodyear 3/8 black pushlock hose is supplied as well. The design of our can includes a wall in the upper section which forces the vapors downward, trapping any oil in the bottom half. The bottom half is tapped and plugged, you can either unscrew the plug or the whole half of the can to drain it.

Here's a few pics as well,

Here's a link if you would like to check it out on our site - PCM of NC Catch Can.

Denis · 10-23-2014, 09:21 AM

Quote:

Originally Posted by pickwithaustin

Everyone will recommend the one that they are using, as they/we always do when we respond to this question on here.

While this is true, some of us (including myself) have run a few different units. i have landed on Apex's can. and i couldnt be happier. fit and finish is great. oh and it also catched a ton of oil. i love it.

Jakey2SS · 10-23-2014, 09:26 AM

I purchased a used Apex can from a member on here, high quality product. I am very happy with it.

rcwest · 10-23-2014, 09:34 AM

Thanks for all the input everyone!

pickwithaustin · 10-23-2014, 09:35 AM

Quote:

Originally Posted by Denis

While this is true, some of us (including myself) have run a few different units. i have landed on Apex's can. and i couldnt be happier. fit and finish is great. oh and it also catched a ton of oil. i love it.

And hence you are recommending the one that you use.

I use Apex as well. Very happy with.

Denis · 10-23-2014, 09:49 AM

Quote:

Originally Posted by pickwithaustin

And hence you are recommending the one that you use.

I use Apex as well. Very happy with.

touche

Apex Motorsports · 10-24-2014, 06:43 AM

Quote:

Originally Posted by pickwithaustin

Everyone will recommend the one that they are using, as they/we always do when we respond to this question on here.

Quote:

Originally Posted by Denis

While this is true, some of us (including myself) have run a few different units. i have landed on Apex's can. and i couldnt be happier. fit and finish is great. oh and it also catched a ton of oil. i love it.

Quote:

Originally Posted by pickwithaustin

And hence you are recommending the one that you use.

I use Apex as well. Very happy with.

Quote:

Originally Posted by Denis

touche

Quote:

Originally Posted by Jakey2SS

I purchased a used Apex can from a member on here, high quality product. I am very happy with it.

So we all agree then.

Denis · 10-24-2014, 06:55 AM

Quote:

Originally Posted by Apex Motorsports

So we all agree then.

figured you might

10-22-2014, 02:03 PM	#1
rcwest Drives: 2014 1SS/RS Camaro Join Date: Oct 2014 Location: Wagener, SC Posts: 28	Catch Can Since there are so many options I was just wondering which catch can everyone recommends?

10-22-2014, 02:07 PM	#2
Warpaint69 Drives: 2013 VR 2SS RS Join Date: Sep 2012 Location: Kansas Posts: 619	You can't go wrong with Elite Engineering or Apex's. There are some other catch can's on the market that I have no experience with so I'll let others chime in on those. __________________

10-22-2014, 04:31 PM	#5
pickwithaustin Drives: 2011 Camaro 2SS/RS Convertible and: Join Date: May 2014 Location: Central Texas Posts: 1,863	Everyone will recommend the one that they are using, as they/we always do when we respond to this question on here. __________________ --------------------------- Currently in my Garage: 2011 Camaro 2SS/RS Convertible \| 1980 Corvette Stingray \| 1981 Firebird \| 1968 El Camino \| 2007 Crown Vic Police Interceptor \| 2001 Silverado \| 2001 Blazer \| 1965 Chevy C-10 \| 2007 Harley Softail Custom \| 2013 MX-5 in Copper Red Mica \| 2000 Corvette Convertible \| 2010 Corvette Grand Sport \| 2006 Audi A3 Turbo \| 2008 BMW 328i

10-22-2014, 04:23 PM	#4
JDP Sales Drives: Chevys at the limit Join Date: Nov 2010 Location: SLC, UT Posts: 9,621	Elite Engineering. They've been doing it for a long time and manufacture very high quality products. Let me know if I can answer any questions for you. Best regards, Tyler 888-308-6007

10-23-2014, 09:26 AM	#9
Jakey2SS Drives: 15' Scat Pack Join Date: May 2014 Location: Fresno, Ca Posts: 281	I purchased a used Apex can from a member on here, high quality product. I am very happy with it.

10-23-2014, 09:34 AM	#10
rcwest Drives: 2014 1SS/RS Camaro Join Date: Oct 2014 Location: Wagener, SC Posts: 28	Thanks for all the input everyone!