SOLD: BMR ELK005 Front End Links - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

blazzin1 · 01-28-2015, 02:01 PM

SOLD: Used BMR ELK005 front end links for FE3 suspension systems. These are the earlier version that has spherical rod ends. The rods ends are still tight and rotate smoothly. I had NO clunking from these when they were installed on my car. I cannot guarantee how they will be on your car, as rod ends are known to be noisy and clunky….that is why BMR revised them. All required hardware included. These will NOT work with 2012+ FE4 suspension systems which have the larger 12mm stud holes. Good fit for all 2010-2011 Camaros. Finish is not perfect, there are some scratches in the powder coat here and there. Will sell the pair for $80 with free shipping to lower 48.

376LS3 · 01-28-2015, 09:16 PM

Dont by any chance have a set of rears that you would be interested in making a package deal would ya?

tbss1 · 01-31-2015, 06:43 PM

$70.00 with free shipping to me. Zip code is 96793. Can pay with PayPal.

blazzin1 · 01-31-2015, 08:24 PM

Quote:

Originally Posted by tbss1

$70.00 with free shipping to me. Zip code is 96793. Can pay with PayPal.

Not a bad offer. I'll let you know tomorrow. I have another potential buyer with a little better offer that is supposed to finalize the sale tomorrow, but if he backs out, you'll be next on the list.

Thanks!

Assassinx1 · 01-31-2015, 11:31 PM

I will buy tonight my paypal is D_dimaiox1@yahoo.com send me an invoice.

tbss1 · 02-01-2015, 01:00 AM

Quote:

Originally Posted by blazzin1

Not a bad offer. I'll let you know tomorrow. I have another potential buyer with a little better offer that is supposed to finalize the sale tomorrow, but if he backs out, you'll be next on the list.

Thanks!

Thank you.

tbss1 · 02-02-2015, 11:56 AM

Blazzin1, did you sell the links? I just realized that I bought the rear links from you a while back.

Jon,

blazzin1 · 02-03-2015, 09:28 AM

Sorry, been distracted with other priorities the last couple days. End Links are still available. "tbss1"….PM comin' your way.

tbss1 · 02-03-2015, 02:54 PM

Blazzin1,

Thank you.
Just curious if you took your car to the truck yet, to see what it will run. Your mods are almost the same as mine I went to the track before the headers. I couldn't get my car to hook. Fastest time was 13.6 @ 108, 60ft was 2.58 if I remember correctly. It's been awhile since I went. Need more practice on my launch.

Jon

01-28-2015, 02:01 PM	#1
blazzin1 Drives: 2010 2SS/RS R6P Join Date: Nov 2008 Location: St. Cloud, FL Posts: 4,845 View My Garage	SOLD: BMR ELK005 Front End Links SOLD: Used BMR ELK005 front end links for FE3 suspension systems. These are the earlier version that has spherical rod ends. The rods ends are still tight and rotate smoothly. I had NO clunking from these when they were installed on my car. I cannot guarantee how they will be on your car, as rod ends are known to be noisy and clunky….that is why BMR revised them. All required hardware included. These will NOT work with 2012+ FE4 suspension systems which have the larger 12mm stud holes. Good fit for all 2010-2011 Camaros. Finish is not perfect, there are some scratches in the powder coat here and there. Will sell the pair for $80 with free shipping to lower 48. Last edited by blazzin1; 02-03-2015 at 03:44 PM.

01-28-2015, 09:16 PM	#2
376LS3 Eh, that'll happen Drives: 2010 2SS Join Date: Apr 2012 Location: Mesa, Arizona Posts: 1,841	Dont by any chance have a set of rears that you would be interested in making a package deal would ya? __________________ 2010 Camaro SS LS3 - No Modz

01-31-2015, 06:43 PM	#3
tbss1 More then meets the eye! Drives: 2010 Camaro 2SS/RS 426 hp Join Date: Oct 2008 Location: Maui Posts: 584 View My Garage	$70.00 with free shipping to me. Zip code is 96793. Can pay with PayPal. __________________ 2010 2SS/RS, M6, OBX 7/8" l/t headers, with high flow cats, MBRP full 3" exhaust, Whipple supercharger, 3.875 pulley, ID-1050X 1260CC injectors, JRE rough idle street blower cam kit, ZL1 fp, ZL1 fpcm, ZR1 3 bar map sensor, cold air intake, Richman 4.10 gears, BMR toe rods, trailing arms, f/r sway bars, f/r sway bar end links, BMR end link brackets, full BMR poly bushing including solid rear cradle bushings, BMR frame connectors and tunnel brace, f/r Hurst swaybar bushing brackets, Fluidamper, MGR shifter, and tune by Jannetty Racing.

02-02-2015, 11:56 AM	#7
tbss1 More then meets the eye! Drives: 2010 Camaro 2SS/RS 426 hp Join Date: Oct 2008 Location: Maui Posts: 584 View My Garage	Blazzin1, did you sell the links? I just realized that I bought the rear links from you a while back. Jon, __________________ 2010 2SS/RS, M6, OBX 7/8" l/t headers, with high flow cats, MBRP full 3" exhaust, Whipple supercharger, 3.875 pulley, ID-1050X 1260CC injectors, JRE rough idle street blower cam kit, ZL1 fp, ZL1 fpcm, ZR1 3 bar map sensor, cold air intake, Richman 4.10 gears, BMR toe rods, trailing arms, f/r sway bars, f/r sway bar end links, BMR end link brackets, full BMR poly bushing including solid rear cradle bushings, BMR frame connectors and tunnel brace, f/r Hurst swaybar bushing brackets, Fluidamper, MGR shifter, and tune by Jannetty Racing.

02-03-2015, 02:54 PM	#9
tbss1 More then meets the eye! Drives: 2010 Camaro 2SS/RS 426 hp Join Date: Oct 2008 Location: Maui Posts: 584 View My Garage	Blazzin1, Thank you. Just curious if you took your car to the truck yet, to see what it will run. Your mods are almost the same as mine I went to the track before the headers. I couldn't get my car to hook. Fastest time was 13.6 @ 108, 60ft was 2.58 if I remember correctly. It's been awhile since I went. Need more practice on my launch. Jon __________________ 2010 2SS/RS, M6, OBX 7/8" l/t headers, with high flow cats, MBRP full 3" exhaust, Whipple supercharger, 3.875 pulley, ID-1050X 1260CC injectors, JRE rough idle street blower cam kit, ZL1 fp, ZL1 fpcm, ZR1 3 bar map sensor, cold air intake, Richman 4.10 gears, BMR toe rods, trailing arms, f/r sway bars, f/r sway bar end links, BMR end link brackets, full BMR poly bushing including solid rear cradle bushings, BMR frame connectors and tunnel brace, f/r Hurst swaybar bushing brackets, Fluidamper, MGR shifter, and tune by Jannetty Racing.

01-31-2015, 11:31 PM	#5
Assassinx1 Drives: Corvettec5 Join Date: Nov 2012 Location: Haledon Posts: 192	I will buy tonight my paypal is D_dimaiox1@yahoo.com send me an invoice.

02-03-2015, 09:28 AM	#8
blazzin1 Drives: 2010 2SS/RS R6P Join Date: Nov 2008 Location: St. Cloud, FL Posts: 4,845 View My Garage	Sorry, been distracted with other priorities the last couple days. End Links are still available. "tbss1"….PM comin' your way.