![]() |
|
|
#1 |
|
LSX Bumblebee
|
275 on front 20x9" Nurburgring
Has anyone done this...America's Tire is telling me that it wont work but I swear it will, and I have seen some people order them. I just want to know if they are just trying to sell me more tires.
|
|
|
|
|
|
#2 |
![]() ![]() ![]() ![]() Drives: 2010 CGM Camaro 2SS/LS3 Join Date: Oct 2013
Location: Raleigh-Durham
Posts: 1,409
|
What's the offset on that 20x9" wheel? If it's 40 or less it will work fine far as I know.
Are they saying the wheel won't fit or the tire won't fit on the wheel? The tire will certainly fit the wheel no problem. TSW's site lists the 20x9 +35 wheel as fitting both front and rear on the Camaro, with the +35 or +20 it should work just fine with a 275. Maybe the tire places system just tells them it won't fit? 2090NUR355120G76 20x9 Front and Rear 5x120 35 MATTE GUNMETAL 0 0 39 1650 TAPER 355/30-20
__________________
2010 2SS
BMR 1" Springs Koni Orange struts/shocks 1LE rear sway bar SRP Racing Pedals Hurst Billet short shifter Square tire/wheel setup Elite Engineering Catch Can Stainless Power longtubes/highflow cats K&N Typhoon CAI RPM Motorsports of Garner, NC dyno tune (421 RWHP) |
|
|
|
|
|
#3 |
|
LSX Bumblebee
|
Yea it's 20 X9 5-120.00 35 DGMTXX, so maybe they are just being told by the system it wont but I mean it should fit fine. 285+ would be a problem from my understanding and need the 20 x10
Thanks for the help. |
|
|
|
|
|
#4 |
|
SoCal Camaro5 Race Team
Drives: 2021 Shadow Grey Camaro 2SS 1LE Join Date: Mar 2010
Location: SO CAL
Posts: 14,367
|
My first wheels were 20x9 Nurbs with a 35 offset and 275 invos and ran them with drop springs. No issues though invos run a bit narrow.
|
|
|
|
|
|
#5 |
![]() Drives: 2014 Saleen 620 White Label #14-011 Join Date: Dec 2014
Location: AL
Posts: 609
|
Wearing 275 35 20s on the front np. 20x9s
__________________
'14 Saleen 620 White Label #14-011
ADM LSA Stage 1 Kit, ADM 2.75 Pulley, DEKA 63lb injectors, ZL1 Fuel Pump, JLT 123MM Big Mouth intake, TSP 2" LTHs, BW TB, 2.5" Catback, Scott Culbert/GEN3PERF tuned! 573WHP/557WTQ @ 10psi. Build Thread Here: http://www.camaro5.com/forums/showthread.php?t=390708 |
|
|
|
|
|
#6 |
![]() ![]() ![]() Drives: Rally Yellow Camaro+Avalanche Join Date: Dec 2009
Location: Vancouver
Posts: 1,110
|
I ran 285 Toyo R888s on my 20x9 Nurbs in the front. No problem, although I am also on coilovers.
__________________
Vengeance Kaotik Cam, C.A.I., ARH LT, Pypes Cat Back, ZL1 Shifter+2012LS3VERT bushing, Quantum Brake Ducts, JDP Tow Hook Scorch Yellow Trim Kit, Shark Fin, AAC DRLs+ABLs+SMDs, ZTA Rear Spoiler, R.Y. 1LE Splitter. Pfadt coilovers, camber plates, trailing arms, Pegasus Solid Subframe. Pedders ZL1 barz, radius arm & steering rack bushings. BMR adjustable toe-rods. Hotchkis Max Chassis Brace. ZL1 GMPP Driveline Upgrade. TurnOne P/S pump. CTS-V 6 pistons.
447 HP @ 6180 RPM / 418 TQ @ 5100 RPM |
|
|
|
|
|
#7 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2012 SS/RS Join Date: Jul 2013
Location: Placentia, CA
Posts: 2,130
|
The tire will for sure fit on the wheel, I have 285 on my 20x9. But you may have clearance issues.
|
|
|
|
|
|
|
|
![]() |
|
|