NOS Kicker Silk Tweeters ND25A PICS UP - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Teebsa · 12-23-2014, 11:52 PM

Was going through the garage the other day and found a box of these (I used to have a close relationship with Stillwater Designs). These are the raw tweets, no crossovers, no mids, just the tweets. These are almost impossible to find new anymore and probably the best tweets they ever made. These are what they were running when they were cleaning house in SQ.

Don't take my word for it, google them. They're 1" silk domes that are extremely detailed, but don't have the bright metal dome sound. I'm going to try swap a set into my car to verify they fit, but that may be a few weeks out before I get a chance.

If anyone's interested, I'll do $85 shipped for a pair and have a few pairs I'd be willing to part with. I'll snap some pics in the next few days.

Teebsa · 01-10-2015, 09:22 PM

Sorry for the delay in pics, holidays got the best of me, here you go, have the flush and surface cups for them.

Teebsa · 01-10-2015, 09:53 PM

If you'd like better pics just ask and I can take some with a real camera. These are just quick cellphone pics.

Teebsa · 01-14-2015, 09:08 PM

No one into old school Kicker?

ttesort1 · 01-15-2015, 07:39 AM

Whats the measurements on these?

Teebsa · 01-17-2015, 12:03 AM

The tweeter's are 1" domes, let me see if I can borrow a caliper and get exact dimensions.

EALVAR · 01-18-2015, 12:08 PM

Any idea what the crossover points & slopes were on the original crossovers?

Edit:

Found this info which may help those considering these awesome tweeters in an active setup:

25mm Diameter Silk Dome Tweeter.
150 Watts Maximum Amplifier Power.
92 dB 1Watt/1Meter Sensitivity.
4 Ohms Impedance.
3.5kHz-22kHz Frequency Response.
2-1/16" (52mm) Mounting Depth.
1-1/4" (32mm) Mounting Hole Diameter.

The 354a crossover:

2-Way Crossover Point at 3.5kHz.
18dB/Octave Crossover Slope.
Tweeter Attenuation is from 1.5 to 6.0 dB in 1.5dB Steps.

Teebsa · 01-19-2015, 10:28 AM

Thanks Ealvar! I have one of the original xover's for it, let me see if I can dig up some specs.

I wasn't able to get a hold of calipers, but could get pretty close with a tape.

Total OD is ~ 1 5/8"
Total Depth is 5/8"

Teebsa · 01-19-2015, 10:45 AM

Did some digging and looks like you're correct, original xovers were 18db 3.5k's. Anything above that should be fine.

Teebsa · 01-21-2015, 11:40 PM

Wow....no one, I figured these would be gone by now.

Teebsa · 01-22-2015, 10:43 PM

$75 Shipped per pair.

Teebsa · 01-31-2015, 02:24 PM

One last bump before they're off to ebay.

EALVAR · 01-31-2015, 04:25 PM

How much for a pair with crossovers shipped to 98405?

Teebsa · 02-02-2015, 07:34 PM

I only have one of the original xovers for it. I could sell it to you, but it wouldn't be much use. I do still have a box of xovers from my Kicker days, let me see what the specs are on them and if they'll work. If not, any xover with 3.5k and 18/db rolloff will work. You could even use bass blockers, but wouldn't really do these justice. I'll track down the xovers tomorrow and let you know.

12-23-2014, 11:52 PM	#1
Teebsa Drives: 2014 2SS/RS M6 Join Date: Oct 2014 Location: San Antonio, Tx Posts: 38	NOS Kicker Silk Tweeters ND25A PICS UP Was going through the garage the other day and found a box of these (I used to have a close relationship with Stillwater Designs). These are the raw tweets, no crossovers, no mids, just the tweets. These are almost impossible to find new anymore and probably the best tweets they ever made. These are what they were running when they were cleaning house in SQ. Don't take my word for it, google them. They're 1" silk domes that are extremely detailed, but don't have the bright metal dome sound. I'm going to try swap a set into my car to verify they fit, but that may be a few weeks out before I get a chance. If anyone's interested, I'll do $85 shipped for a pair and have a few pairs I'd be willing to part with. I'll snap some pics in the next few days. Last edited by Teebsa; 01-10-2015 at 09:20 PM.

01-10-2015, 09:22 PM	#2
Teebsa Drives: 2014 2SS/RS M6 Join Date: Oct 2014 Location: San Antonio, Tx Posts: 38	Sorry for the delay in pics, holidays got the best of me, here you go, have the flush and surface cups for them. Attached Images

01-18-2015, 12:08 PM	#7
EALVAR Drives: '11 1LT RS, '13 2LT SS Dusk Edition Join Date: Nov 2014 Location: Tacoma, WA Posts: 19	Any idea what the crossover points & slopes were on the original crossovers? Edit: Found this info which may help those considering these awesome tweeters in an active setup: 25mm Diameter Silk Dome Tweeter. 150 Watts Maximum Amplifier Power. 92 dB 1Watt/1Meter Sensitivity. 4 Ohms Impedance. 3.5kHz-22kHz Frequency Response. 2-1/16" (52mm) Mounting Depth. 1-1/4" (32mm) Mounting Hole Diameter. The 354a crossover: 2-Way Crossover Point at 3.5kHz. 18dB/Octave Crossover Slope. Tweeter Attenuation is from 1.5 to 6.0 dB in 1.5dB Steps. Last edited by EALVAR; 01-18-2015 at 12:28 PM.

01-10-2015, 09:53 PM	#3
Teebsa Drives: 2014 2SS/RS M6 Join Date: Oct 2014 Location: San Antonio, Tx Posts: 38	If you'd like better pics just ask and I can take some with a real camera. These are just quick cellphone pics.

01-14-2015, 09:08 PM	#4
Teebsa Drives: 2014 2SS/RS M6 Join Date: Oct 2014 Location: San Antonio, Tx Posts: 38	No one into old school Kicker?

01-15-2015, 07:39 AM	#5
ttesort1 Drives: 2013 2lt rs Join Date: Jul 2014 Location: Iowa Posts: 241	Whats the measurements on these?

01-17-2015, 12:03 AM	#6
Teebsa Drives: 2014 2SS/RS M6 Join Date: Oct 2014 Location: San Antonio, Tx Posts: 38	The tweeter's are 1" domes, let me see if I can borrow a caliper and get exact dimensions.

01-19-2015, 10:28 AM	#8
Teebsa Drives: 2014 2SS/RS M6 Join Date: Oct 2014 Location: San Antonio, Tx Posts: 38	Thanks Ealvar! I have one of the original xover's for it, let me see if I can dig up some specs. I wasn't able to get a hold of calipers, but could get pretty close with a tape. Total OD is ~ 1 5/8" Total Depth is 5/8"

01-19-2015, 10:45 AM	#9
Teebsa Drives: 2014 2SS/RS M6 Join Date: Oct 2014 Location: San Antonio, Tx Posts: 38	Did some digging and looks like you're correct, original xovers were 18db 3.5k's. Anything above that should be fine.

01-21-2015, 11:40 PM	#10
Teebsa Drives: 2014 2SS/RS M6 Join Date: Oct 2014 Location: San Antonio, Tx Posts: 38	Wow....no one, I figured these would be gone by now.

01-22-2015, 10:43 PM	#11
Teebsa Drives: 2014 2SS/RS M6 Join Date: Oct 2014 Location: San Antonio, Tx Posts: 38	$75 Shipped per pair.

01-31-2015, 02:24 PM	#12
Teebsa Drives: 2014 2SS/RS M6 Join Date: Oct 2014 Location: San Antonio, Tx Posts: 38	One last bump before they're off to ebay.

01-31-2015, 04:25 PM	#13
EALVAR Drives: '11 1LT RS, '13 2LT SS Dusk Edition Join Date: Nov 2014 Location: Tacoma, WA Posts: 19	How much for a pair with crossovers shipped to 98405?

02-02-2015, 07:34 PM	#14
Teebsa Drives: 2014 2SS/RS M6 Join Date: Oct 2014 Location: San Antonio, Tx Posts: 38	I only have one of the original xovers for it. I could sell it to you, but it wouldn't be much use. I do still have a box of xovers from my Kicker days, let me see what the specs are on them and if they'll work. If not, any xover with 3.5k and 18/db rolloff will work. You could even use bass blockers, but wouldn't really do these justice. I'll track down the xovers tomorrow and let you know.