You are browsing camaro5 
 |
|
05-23-2013, 10:22 PM
|
#1 |
|
Byron4
|
DIY removing the cloth from door panels?
Does anyboby remember the link to the DIY for removing the cloth on the 1SS door panels to prepare them for paint?
|
|
|
|
05-27-2013, 10:24 PM
|
#2 |
 
Drives: 2012 1SS Black with white rally str Join Date: Jul 2011
Location: Corpus Christi, TX
Posts: 611
|
Don't remember where it is, but I did the dash trim and all I did was pull out the staples and pull the cloth off. I then removed the residual adhesive from the plastic with mineral spirits and sprayed it with duplicolor color and clear.
__________________
 It's good to be the King. |
|
|
|
|
05-28-2013, 11:47 PM
|
#3 |
 
Drives: Black LT Camaro Join Date: May 2010
Location: West Palm Beach/Gainesville Florida
Posts: 169
|
To add to what was previously stated, after the mineral spirits I used fine grit size to get rid of all the glue, then used primer, paint, and a clear coat.
|
|
|
|
|
05-28-2013, 11:54 PM
|
#4 |
|
Account Suspended
Drives: 2011 Camaro VR 2SS/RS & Impala Join Date: Apr 2013
Location: Riverside,ca
Posts: 5,342
|
I was looking for the DIY thread too
|
|
|
|
|
05-31-2013, 11:30 AM
|
#5 |
 
Drives: 2012 Camaro Join Date: Nov 2012
Location: Myfas Ca
Posts: 16
|
|
|
|
|
|
05-31-2013, 11:32 AM
|
#6 |
|
Drives: 2012 Camaro Join Date: Nov 2012
Location: Myfas Ca
Posts: 16
|
Found em now I need the parts to do it!!!!! Can't wait
|
|
|
|
|
03-31-2015, 08:50 PM
|
#7 |
|
Drives: 2012 Camaro white & blacked out Join Date: Mar 2015
Location: San Pedro
Posts: 9
|
I did it, and it was very simple. Pry the panel off, remove staples, cleaned the glue and residue with GOOF OFF, one coat of primer and 2 coats of paint.
|
|
|
|
|
|
|
|
 |
|
|
