You are browsing camaro5 
 |
|
03-19-2015, 04:27 PM
|
#1 |
 Drives: 2014 ZL1 Black on Black Join Date: May 2014
Location: Augusta, Georgia
Posts: 12
|
Heat Extractor
How hard is it to remove the heat extractor from the hood?
|
|
|
|
03-19-2015, 07:56 PM
|
#2 |
|
Drives: 2014 ZL1 Black on Black Join Date: May 2014
Location: Augusta, Georgia
Posts: 12
|
heat extractor
anybody????
|
|
|
|
|
03-19-2015, 08:08 PM
|
#3 |
        
Drives: 2013 ZL1 Join Date: Mar 2013
Location: Oklahoma
Posts: 2,326
|
There are 8 nuts under the hood you will have to take off to get the carbon fiber piece off. You will have to have a rubber hammer to tap easy on the studs to kind off loosen up the piece then you can just lift it up from the hood. Just did mine tuesday because the car I bought did not have the exposed fiber carbon on it and the dealer told me it did and he got one for me to put on.I had to give him the piece that was on the car back.Took about 30 minutes to do it.
|
|
|
|
|
03-19-2015, 09:42 PM
|
#4 |
|
Drives: 2014 ZL1 Black on Black Join Date: May 2014
Location: Augusta, Georgia
Posts: 12
|
heat extractor
Thanks a million!!!
|
|
|
|
|
04-05-2015, 11:40 AM
|
#5 |
|
Drives: 2014 ZL1 Black on Black Join Date: May 2014
Location: Augusta, Georgia
Posts: 12
|
heat extractor
Okay folks need your help again. I removed the eight bolts holding the extractor on and rubber hammered them loose. My problem is they seem to be stuck on with an adhesive also. I tried to gently pull but was afraid of damage. What could I do to get these off now without any damage? Thanks VNVET
|
|
|
|
|
04-05-2015, 12:02 PM
|
#6 |
|
Drives: 2014 ZL1 Black on Black Join Date: May 2014
Location: Augusta, Georgia
Posts: 12
|
ttt
|
|
|
|
|
04-05-2015, 01:00 PM
|
#7 |
  
Drives: '21 ZLE A10 Join Date: May 2012
Location: Mechanicsville, VA
Posts: 6,824
|
maybe squirt some "goo gone" under the gap and apply a little heat via a blow dryer.
__________________
'21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60'
'17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold) |
|
|
|
|
|
|
|
 |
|
|
